Original user manual
1.5 External interfaces
P10 may be mounted hanging or standing (upside down) at a sufficiently stable carrier unit
suitable for the load (crane or dolly).
P10 is equipped with a mitchell adapter (or optional on request with an 80mm outer diameter) for
attachment to film devices such as dollies or camera cranes.
1.6 Legal Notice
The manufacturer’s specified limit values must be strictly adhered to. Any excess should be
avoided under all circumstances.
In case of accidents due to negligence or abusive use, the manufacturer will not be held liable for
any damage or injuries. The assembly and disassembly sequence specified in the user manual
must be observed.
Use exclusively original parts for the product’s maintenance.
Accessories of other manufacturer, may limit neither the use nor the safe use of P10!
The people entrusted to operate P10, must have read and understood the original user manual of
the manufacturer. In case of questions regarding the safe use, please contact the manufacturer.
Contact details may be found among other things on the CE marking on the P10 touch panel.
Service life of the equipment:
Service life span is limited by material wear and tear. Therefore, service life depends on
frequency of use and environmental conditions, to which P10 is exposed.
