Mount-It! MI-7610 Manual de usuario

MICROPHONE BOOM ARM

MI-7610

Thank you for choosing Mount-It

Clamp Assembly

Boom Arm

Grommet Bolt

Grommet Adapter Grommet

Wing Nut

Use with products heavier than the rated weights indicated may result in instability causing possible injury.

Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.

Safety gear and proper tools must be used. This product should only be installed by professionals.

Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.

Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.

This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.

This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact Mount-It!

for a replacement.

Check that the product is secure and safe to use at regular intervals (at least every three months). A (x1) C (x1)

M6x100

B (x1) D (x1)

E (x1)

Mount-It!

1kg

(2.2lbs)

RATED

PACKAGE CONTENTS

Check carefully to make sure there are no missing or defective parts. Some hardware

provided may not be used.

CHOKING HAZARD. Package includes small parts.

Not for children under 3 years. Adult supervision is required.

1.Insert the Grommet adapter #C into the slot that the C-clamp was just removed from.

2.Place the Grommet Bolt B through the center hole on the base as pictured and place the assembled

piece over the grommet hole on your desktop.

The grommet bolt is compatible with desktops up to 2.36” thick. For stable installation, the Wing nut #D

and the circular plate must be adequately engaged with the desk and the Grommet bolt #B

3. Position the circular plate on the Grommet bolt #B as shown (circular plate was removed from the

clamp assembly in the previous step). Tighten the assembly by attaching the Grommet Wing Nut #D to

the bottom of Grommet Bolt #B and tighten until secure.

4. Attach the Boom Arm E into the top of the now installed base.

Grommet Installation Continued

To install in the clamp configuration attach Clamp Assembly A to the desk in the desired location and

insert the Boom Arm E into the top of the clamp as pictured.

Option 1: Clamp Installation

1.To install in the grommet configuration, use a Philips head screwdriver and remove the bolt and nut

from the top of the Clamp Assembly A.

2.Pull out the C shaped bracket from the base .

3.Using the screwdriver, remove the screw from the end of the bolt to detach the circular plate attached

to it.

Option 2: Grommet Installation

Step 1

10-60mm

Universal Adapter Included

compatible with most microphones,

shock mounts and pop filters

Fit for 5/8" adapter and 3/8" adapter

Before installing your microphone be

sure to loosen the nut shown above to

leave a gap of approximately 2mm for

smooth installation

Final Adjustment

Step 2

2mm

-240°

0°

+45°

-90°

-20° +60°

CABLE

MANAGEMENT

for a neat and

clean look

360°

rotation

JOINT ADJUSTMENT

Adjust the microphone

boom arm position at

each joint. Loosen the

knob, adjust position

and tighten to lock in

the desired position.

Tabla de contenidos

Otros manuales de Rack y soporte de Mount-It!

Mount-It!

Mount-It! MI-4882 Manual de usuario

Mount-It!

Mount-It! MI-754 Manual de usuario

Mount-It!

Mount-It! MI-725 Manual de usuario

Mount-It!

Mount-It! MI-4753B Manual de usuario

Mount-It!

Mount-It! MI-763 Manual de usuario

Mount-It!

Mount-It! MI-394 Manual de usuario

Mount-It!

Mount-It! MI-310 Manual de usuario

Mount-It!

Mount-It! 2781 Manual de usuario

Mount-It!

Mount-It! MI-2789 Manual de usuario

Mount-It!

Mount-It! MI-2291 Manual de usuario

Mount-It!

Mount-It! MI-4200 Manual de usuario

Mount-It!

Mount-It! MI-2041 Manual de usuario

Mount-It!

Mount-It! MI-2171L Manual de usuario

Mount-It!

Mount-It! MI-7916 Manual de usuario

Mount-It!

Mount-It! MI-7931 Manual de usuario

Mount-It!

Mount-It! MI-7264 Manual de usuario

Mount-It!

Mount-It! MI-5761 Manual de usuario

Mount-It!

Mount-It! MI-792 Manual de usuario

Mount-It!

Mount-It! MI-2041L Manual de usuario

Mount-It!

Mount-It! TPM-MA09-24P Manual de usuario

Mount-It!

Mount-It! MI-772 Manual de usuario

Mount-It!

Mount-It! MI-850 Manual de usuario

Mount-It!

Mount-It! MI-751 Manual de usuario

Mount-It!

Mount-It! MI-2751 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario