Motorola CDMA CONNECTIVITY KIT Manual de usuario

Welcome

Motorola Data Connectivity Kit

with TrueSync

Software

for CDMA Compatible Phones

User’s Guide

Thank you for choosing Motorola - a global leader in communications

technology. This exciting new kit transforms your CDMA phone

(available separately) into a conveniently portable fax modem. Use the

Data Connectivity Kit to connect your CDMA phone to a computer, and

you can fax

, access the Internet

, send and check e-mail

– you can

transmit and receive data wherever there is a wireless signal!

Thank you for purchasing the Motorola Data Connectivity Kit with

TrueSync Software for CDMA Compatible Phones!

• Getting Started

• Placing a Data Call

• Ending a Data Call

• Receiving a Data Call

• TrueSync Synchronization

• Troubleshooting

Getting Started

Now that you have opened the package, you are ready to go.

To get started,

connect the cable

install the software

, and

make a wireless data connection

It is as easy as that!

In the package, you will ﬁnd:

• The Motorola Data Cable.

• A CD-ROM with installation software.

• A TrueSync

Getting Started Guide.

To begin making wireless data connections, you will

also need:

• A Motorola CDMA Phone with

data capability

• A compatible desktop, laptop, or handheld computer.

11menu

END

88vib

tuv

77pqrs

44batt

ghi

22abc

55lock

jkl

RCL STO CLR SEND

FCN

66mute

mno

33def

99wxyz

00opr

Digital

Getting Started

Checking for Data Capability

To use your new Data Connectivity Kit, ﬁrst make sure that your

CDMA phone is data capable. To do so, just use your phone to

perform the following simple test.

Press

then

⁄

ﬁ

You will see:

Phone Info

Press

to select.

Press

to scroll through the submenu.

If you see:

TrueSync Capable

and

Modem/Fax Capable

your CDMA phone is data capable.

If you do not see the screens shown to the left as you scroll,

contact your Service Provider for more information.

PhonePhone

InfoInfo Modem/FaxModem/Fax

CapableCapable

TrueSyncTrueSync

CapableCapable

ƒ⁄, ¤, ﬁ

Getting Started

Attaching the Data Cable

Before you install the fax/modem software on your computer, it is

a good idea to attach the cable to your computer and phone.

Plug the smaller end of the cable into the accessory

connector on your phone, as shown at left.

The other end of the cable is a 9-pin plug (a PC RS232 plug).

Find the matching serial port on the back of your computer,

insert the 9-pin plug, and tighten the screws by hand.

To indicate the cable is attached on both ends, your phone

will beep once.

Keep in mind:

To save power, some laptops deactivate unused

serial ports. If this happens, open an application that uses the

serial port, like a fax or dial-up application, and your computer will

automatically activate the port.

Installing the Software

To begin making wireless data calls, you will need to

install the software from the CD-ROM that came in the Data

Connectivity Kit. Included on the disk is the CDMA modem driver

for your computer.

RCL STO CLR

SEND

FCN END

pqrs

opr

Getting Started

What is Pre-arrangement?

Some networks require you to change a setting on your phone

before you can receive an incoming fax or data call. This is called

pre-arrangement.

If your network requires it, do not worry about placing data or fax

calls – the pre-arrangement setting only applies to receiving calls.

In pre-arrangement mode, you will not be able to receive incoming

Voice Calls. Once you have selected a pre-arrangement setting,

your phone will remain in that setting until you change it.

Continue to learn how to set up pre-arrangement.

Getting Started

Setting up Pre-arrangement

Note:

This menu option is only available if your Service

Provider requires

pre-arrangement

and the data cable is

connected

to your phone.

Press

then

to enter the menu.

Press

to scroll to

Phone Options

and press

select.

Press

to scroll to

Data Setup

and press

to select.

Press

to scroll to

Voice Only

Incoming Fax

Incoming Data

To Main Menu

and press

to select.

If you select Incoming Fax or Incoming Data, you will see:

NoIncoming VoiceCalls

After a few seconds, your phone will return to

Data Setup

. If

you would like to keep the setting, press

and the phone

will return to its idle state. You will see:

Data

Fax Ready

Your phone will automatically return to Voice Only mode if

you remove the cable, turn OFF the phone, or shut down

your computer.

Keep in mind:

When your phone is in Data or Fax mode, you can

still place voice calls, but you will not be able to receive voice calls.

PhonePhone

BookBook

TimersTimers

ToneTone

ControlControl

LockLock

SecureSecure

PhonePhone

OptionsOptions DataData

SetupSetup VoiceVoice

OnlyOnly

IncomingIncoming

FaxFax

IncomingIncoming

DataData



To MainTo Main

Menu Menu 



Placing a Data Call

Making a Wireless Data Connection

Once the data cable is connected, your phone becomes a modem

for your computer. To send a fax or data, use an application on

your computer to place the call.

Keep in mind:

You cannot place data or fax calls through your

phone’s keypad. All data and fax calls must be placed through the

application on your computer.

Make sure the cable is

connected

properly.

Open the application on your computer, like a fax or dial-up

application, and place the call through the application on

your computer.

The phone will display the number dialed through your

computer. If the number is in your phone’s internal Phone

Book, your phone will display the name stored in the entry.

While the connection is being made,

your phone will display:

Connecting...

Your phone will automatically redial 3 times (or until it is

successful). If the call is not connected after 3 tries, the display will

return to idle.

2512

Dialing

312-555-1212



2512

Connecting..

Placing a Data Call

Reading the Display

Once the call is successfully connected, your phone’s display

shows transmission information.

You will see:

• the kind of call, either Fax or Data.

• the connection speed.

• the time elapsed for the current connection.

• the number to which you are connected.

• real-time transfer rates for sending info.

• real-time transfer rates for receiving info.

2512

Fax 14.4 0:12:11

847-555-1212

Ending a Data Call

When making data calls, keep in mind that some of the normal

ways to end a wireless call, like pressing the Smart Button or

closing the phone, will not work.

To end a data call:

Close the connection through the application on your

computer.

Your phone will return to the idle display.

Keep in mind: If your service requires pre-arrangement,

your phone will remain in pre-arranged status when the data

call is ended. You will see either Fax Ready or Data Ready.

Note: Disconnecting the cable or turning OFF your phone will

also end a data call, but they may disrupt your computer.

See troubleshooting for more information.

Receiving a Data Call

When you have an incoming data or fax call, your phone’s display

will show what kind of call you are receiving, along with the

number of the caller. (If the number matches an entry in your

Phone Book, you will see the name stored in the entry instead).

To receive a data or fax call:

• The cable must be attached to your phone and

computer.

• Both your phone and computer must be turned ON.

• If your service requires pre-arrangement, your

phone must be set in the appropriate mode to

receive the call.

2512

Data Call

312-555-1212



2512

Fax Call

312-555-1212



Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de Motorola

Motorola

Motorola IDEN ORGANIZER Manual de usuario

Motorola

Motorola 98741H - Mobile PhoneTools - PC Manual de usuario

Motorola

Motorola CHARM Manual técnico

Motorola

Motorola MOTOwi4 - RFS7000 - Network Management... Manual de usuario

Motorola

Motorola FREESCALE SEMICONDUCTOR M68EZ328ADS Manual de usuario

Motorola

Motorola MPT Manual de usuario

Motorola

Motorola IDEN WIRELESS DATA SERVICES Manual de usuario

Motorola

Motorola PC*MILER I355 Manual de usuario

Motorola

Motorola MSP3-STGPR-SW-ED - Mobility Services Platform Provision... Actualización de firmware

Motorola

Motorola MOTONAV Manual de usuario

Motorola

Motorola MSP3-CNTRL-SW-100 - Mobility Services Platform Control... Actualización de firmware

Motorola

Motorola IDEN COMPANIONPRO Manual de usuario

Motorola

Motorola SABER RVN4002K Manual de usuario

Motorola

Motorola MOSCAD 68P02958C00-B Manual de usuario

Motorola

Motorola H17txt Manual de usuario

Motorola

Motorola MTX 8000 Manual de usuario

Motorola

Motorola MSP3-CNTRL-SW-1 - Mobility Services Platform Control... Manual de usuario

Motorola

Motorola 98653H - Mobile PhoneTools Plus USB Cable Manual de usuario

Motorola

Motorola ATRIX 4G - Instrucciones de montaje

Motorola

Motorola AIR-CB21AG-A-K9 Manual de usuario

Motorola

Motorola BACKFLIP Manual de usuario

Motorola

Motorola MSP3-CNTRL-SW-1 - Mobility Services Platform Control... Actualización de firmware

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario