Motorola SM56 Guía de configuración

Motorola

SM56 Software Modems

Quick Start User's Guide

Contents

1 Introduction..................................................................................................................1

2 Preparing the Computer For Installation.....................................................................3

3 Installing The Modem Hardware.................................................................................3

4 Installing the Modem on Windows 98, Millennium, Windows 2000 and Windows XP

5 Verifying Correct Installation......................................................................................4

6 Troubleshooting...........................................................................................................5

7 Un-installing and Upgrading .......................................................................................8

8 Changing the Operating System..................................................................................9

9 Improving Direct X Speakerphone Performance and Quality...................................10

10 Contact Information...............................................................................................11

Appendix A: SM56 Main Features...................................................................................11

SOFTWARE LICENSE AGREEMENT...........................................................................12

1Introduction

Motorola's SM56 modems are available for use on PCI, and AC-Link (including CNR and MDC)

PC's. The SM56 modem is a feature-rich, V.90/V.92 modem at an attractive price. It supports all

fax and data fall back modes, and different driver installs include telephone answering machine

(TAM) operation and full speakerphone functionality. This document details installation,

troubleshooting, and usage of the SM56 software modem.

The SM56 modems provide high-speed communications between your personal computer and a

remote location, such as an Internet Service Provider (ISP), so you can:

•Receive data at up to 56 Kbps in V.90/V.92 or K56Flex modes, for faster Internet access.

•Use your computer to send and receive faxes, at up to 14.4 Kbps

•Use your computer as a Video Phone to place and receive Video Phone calls.

•Use your computer as a telephone answering machine (Not available on Data/Fax modems).

•Use your computer as a speakerphone, to place and receive voice calls

(Data/Fax/Speakerphone modems only).

The SM56 modems supports the following Operating Systems based on the form factor

Product Type Operating Systems

PCI Windows 98, Windows Millennium,

Windows 2000 and Windows XP

CNR and MDC (AC-Link) Windows Millennium,Windows 2000

and Windows XP

Note: The modem cannot be used in pure DOS or on any other operating system. Note that

Windows 98, Windows Millennium, Windows 2000/XP require different modem drivers. The

driver for one OS will not work on the other OS. Make sure you have the correct drivers before

installing

Computer OEMs that bundle the SM56 modem can benefit from sizable cost reductions, hardware

reduction, and lower power consumption. End users benefit from quick, easy and affordable

software upgrades, which help them keep current with the latest communications technology.

Important: There are different SM56 modem categories, and each supports a different basic

feature-set, as follows:

Product Names Modem Types Features

Motorola SM56 modem

Data/Fax only • All data and fax modes

• No telephone answering

machine (TAM)

• No caller ID

• No distinctive ring

• No speakerphone

Motorola SM56 Voice

Modem

Data/Fax/TAM • All data and fax modes

• Telephone answering

machine (TAM)

• Caller ID

• Distinctive ring

• No speakerphone

Motorola SM56 Data/Fax/TAM/Speakerphone

• All data and fax modes

Speakerphone Modem

•Telephone answering

machine (TAM)

• Caller ID

• Distinctive ring

• Full-duplex speakerphone

You can check which modem you have by selecting Start->Settings->Control Panel, and then

double click on theModems icon. The modem name will appear in the Modem Properties window.

2Preparing the Computer For Installation

To ensure problem-free installation ensure that an unused COM port is available. The SM56 install

program interrogates lower COM ports (below COM 5) and installs the modem on the first

available and unused port. Although the SM56 functions perfectly on any available COM port,

some communications applications may not be able to use the modem if it gets installed above

COM 4. Refer to the Troubleshooting section in this document for information on how to force the

modem onto a COM port below COM 5 after install is complete.

3Installing The Modem Hardware

1. Power down the computer.

2. Locate the connector (AC-Link, CNR, PCI. Mini PCI, etc.) on the motherboard, and carefully

insert the SM56 modem board.

3. Connect the Wall jack on the modem board to an analog phone jack using an RJ-11 phone cable.

If your modem board also has a telephone handset jack, make sure to not plug the telephone

line into that jack. The jacks will be labeled with a little icon and/or text indicating which is

which.

4. Power ON the computer.

Important: When using the SM56 modem, or any modem for that matter, you should always

connect the modem line input to a direct analog telephone line. This will maximize modem

performance by avoiding any problems introduced by internal PBX systems, etc.

4Installing the Modem on Windows 98, Millennium,

Windows 2000 and Windows XP

(Note: The Install Wizard may vary slightly with different versions of the OS and different service

packs)

On starting Windows for the first time after installing the modem Plug and Play (PnP) detects the

new hardware and begins an install wizard for the modem. The modem is detected as a new PCI

Device or new PCI Communications Device. The wizard fist looks for the modem information

(INF) file, which is included on Motorola's distribution disk or CD-ROM. This file contains

information about the modem, including device type, device driver information, as well as the AT

command/response sets that it supports.

Browse to the SM56 modem files on the Motorola disk/CD-ROM. Windows will find the

information on the disk. On older versions of Windows 98 you may get an error message Cannot

Locate File...... If you do, simply re-point the install wizard to the Motorola disk/CD-ROM and it

will find the file the second time around.

Windows copies the necessary modem files to the computer and transparently runs the necessary

installation routines.

For D/F/TAM and D/F/TAM/Speakerphone modems, Windows finds a second device after the

modem has been installed. Windows notifies you that it has found a Serial Wave Device for the

modem and prompts for a Wave Device driver. Re-point to the Motorola disk/CD-ROM and click

OK. It finds the INF file and installs the appropriate drivers.

Note:

The SM56 also installs a modem Helper utility on the Windows System Tray (right side of the Task

Bar). This application includes real time modem status (dialing, negotiating, connect rate, etc.), in

addition to user selection for COM port, country and languageThere is also an audio test included,

which allows you to verify if your sound subsystem supports Direct X 3.0 (or later) -- needed to

hear call progress (dialing and negotiation). The SM56 installation auto-detects the country from

the OS and defaults to that.

5Verifying Correct Installation

Verifying Modem Software Operation on Windows 98 and Windows 2000

1. Open the Windows Control Panel and double click the Modems icon.

2. Select the Diagnostics tab, and single click the COM port that the Motorola SM56 modem uses.

3. Click on the More Info button.

Within a few seconds a window will appear with the modem responses to various ATI commands

issued to it. If this happens, the modem software is properly installed and functioning correctly.

Verifying Modem Software Operation on Windows XP

1. Open the Windows Control Panel and double click the Phone and Modems Options icon.

2. Select the Modems tab ,and single click the COM port that the Motorola SM56 modem

uses

3. Click on the Properties button.

4. Select the Diagnostics tab.

5. Click the Query Modem button

Within a few seconds a window will appear with the modem responses to various ATI commands

issued to it. If this happens, the modem software is properly installed and functioning correctly.

Verifying Proper Hardware Operation

To verify correct SM56 modem hardware operation, you can use the following local analog

loopback (LAL) test procedure, as follows:

1. Important: Remove the telephone line cable from the modem card.

2. Open HyperTerminal (or any terminal application).

3. Optionally, select a connection name and icon.

4. In the Connect Using window, select the Motorola SM56 ...... modem. Click OK.

5. Enter a number in the Phone Number box...any number since we will not be dialing it.

Click OK.

6. On the next screen select Cancel.

7. Enter AT and hit <Enter>.

1. The response OK should appear.

8. Enter ATS46 = 23 and hit <Enter>.

9. Enter AT&T1 and hit <Enter>. Wait a few seconds.

10. Type some letters at the keyboard. If the hardware is functioning correctly, the letters you

type appear on the screen.

11. To exit this test mode, type +++ in quick succession (note no carriage return) to escape to

command mode. After getting the OK response type ATH <Enter> to hang up.

6Troubleshooting

If there is a problem when using the SM56 modem, and your communications application does not

explain the problem, check the following list of symptoms and tips.

•My Communications Software Cannot Use the Modem at COM 5

Some communications applications, such as older versions of AOL, do not communicate with a

COM port higher than COM4. Sometimes on Windows 98 platforms the SM56 install program will

not be able to map the modem to a COM port number below COM5. If the modem installs on COM

5 or higher you can manually force the modem onto a different COM port using the SM56 Helper

application (COM Ports tab) in the Windows System tray (just to the right of the Task Bar).

•There is no dial tone

1. Ensure that the telephone cable is securely connected at both ends.

2. Ensure the telephone cable is plugged into the correct jack on the modem -- some modems

provide a second jack for handset support.

2. Unplug the telephone line cable from the computer, and connect it directly to a telephone from

the wall outlet. Check for a dial tone. If there is none, the problem is in the telephone line or

system. Call the service provider.

•Get An Error Message "You are not connected to a standard phone line"

When you try to dial a connection an error message box pops up, indicating that your are not

connected to a proper analog phone line. This is the SM56 digital line guard (only available on PCI

II and AC-L modems) feature, which protects against hardware damage if the modem is plugged

into a high current phone outlet -- such as a digital phone jack. The modem automatically detects

the over-current and goes back on-hook before hardware damage occurs. Check the phone outlet

and make sure that it is a real analog phone line. Try another analog phone jack.

•ICannot Hear Call Progress

1. Make sure your speakers are connected to the speaker output jack on your sound system.

2. Call progress reporting on the SM56 requires Direct X 5.0 (for Win 98, Windows Me, and Win

2000) or later be installed on your PC, and that your sound system/drivers support Direct X

playback. To test, go into the SM56 AC-L Modem helper Desktop Tray application and select

the Call Progress tab. Then click the Testbutton. If you do not hear anything then your sound

system does not support Direct X (or the correct version). Contact your sound card vendor for

driver updates or more information.

•The modem cannot complete a connection to another modem

1. Ensure that your modem is dialing the correct number. Ensure that you've specified the correct

area code, if one is required.

2. Determine whether the remote modem is correctly configured to communicate with yours.

•The modem does not answer incoming calls

1. Ensure that the automatic answer parameter is set to one of the enabled options, using the ATS0

command (ATS0=1 to answer after one ring, ATS0=2 to answer after two rings, and so on).

2. Ensure that no other devices, such as fax or answering machines, are answering calls before the

modem does.

•The modem disconnects during a connection

1. Ensure that the telephone cable is securely connected at both ends.

2. Ensure that call-waiting is disabled. In most areas, the command *70 or #70 disables

call-waiting. Check with your telephone company for the correct key sequence. (With

call-waiting, the incoming call's click sound may be disrupting your call.)

3. Another phone extension in the house might have been picked up.

•Data is not transmitted or received for unusually long periods of time

1. Re-dial the call. (The telephone line connection may be poor.)

2. Try another ISP number, the server could be busy.

•Streaming applications like RealPlayer stop receiving data and report "Net

Congestion"

1. This usually occurs when the ISP, Internet, or streaming host side server is busy and there are

many users competing for bandwidth. It is not a modem problem.

•Poor speakerphone quality using Direct X

If you are using the soft-speakerphone version of the SM56 (that uses Windows Direct X and the

PC sound system instead of dedicated voice hardware on the modem board, i.e. no speaker and

microphone jacks on the modem board), and the quality is poor refer to section 10, "Improving

Direct X Speakerphone Performance and Quality" for some hints and tips.

•You cannot enter tone selections successfully when calling tone-driven

applications

When dialing a remote system that requires you to enter selections using the telephone keys, such

as a voice-mail depot or bank-account information provider, you can lengthen the duration of the

tones your modem sends, so that the remote system can detect them better. To adjust DTMF tone

length, use the AT+VTDncommand, where nspecifies the tone duration. Check the SM56 online

Help (via the SM56 Helper application on the Windows Desktop Tray) for a list of supported AT

Commands.

•The modem does not respond to AT commands

1. Ensure that your communications software is configured to use the same COM port as the

modem's COM port.

2. Reset modem parameters to default options by entering AT&F; then re-enter custom options.

•The modem responds to commands, but they do not appear on the screen

1. Usually this is because the local echo is turn OFF. Turn it on by issuing ATE1 and hit <Enter>.

•You've installed a new peripheral device; now the modem does not work

1. In the Windows desktop tray, select Start.

2. Select Help. The Windows Help Topics window appears.

3. Select the Contents tab.

4. Select If You Have a Hardware Conflict.

5. A series of troubleshooting actions appears. Follow the appropriate sequence.

•The modem connects; then meaningless characters appear

This is usually caused by Error correction turned off. To correct:

1. Open the Control Panel. Double click the Modems icon.

2. Click on the COM port that the Motorola SM56...Modem is installed on

3. Click on Properties.

4. Select Connection.

5. Click on Advanced.

6. Check the Use Error Control-Required to Connect box.

•The modem cannot connect; the Error Control option is selected

The modem may be connecting at a rate higher than appropriate for the line conditions.

1. Use the AT%B command to limit the maximum connection rate. (For a list of AT commands,

refer to the on-line User's Guide.)

2. Lower the rate, using AT commands, until the problem is corrected. You can add AT commands

to do this; refer to the next section.

•How Do I Add AT Commands Before the Modem Dials My ISP?

1. Open the Control Panel.

2. Double-click the Modems icon.

3. Click on once to select the Motorola SM56...Modem.

4. Click on Properties.

5. Select Connection.

6. Clickon Advanced.

7. In the Extra Settings box, chain AT commands as needed. You do not need to enter the AT

prefix, but it will not hurt if you do.

7Un-installing and Upgrading

Modem Un-Install Procedure on Windows 98 and Millennium

1. Open the Windows Control Panel

2. Double click the Add/Remove Programs icon.

3. Select Motorola SM56 Modem Un-install and click Add/Remove.

4. Shut down the computer and remove the modem board from the computer.

Modem Un-Install Procedure on Windows 2000 and Windows XP

1. Open the Windows Control Panel

2. Double click the System Icon.

3. Select the hardware tab and Select the Device Manager button.

4. Double Click the Modems item.

5. Right Click on the Motorola SM56 Modem device and select uninstall from the popup menu.

6. Shut down the computer and remove the modem board from the computer.

Modem Upgrade Procedure on Windows 98 and Millennium

1. Obtain the latest driver set from your direct modem supplier.

2. Run the upgrade utility -- sm56set.exe, and follow the prompts

Modem Upgrade Procedure on Windows 2000 and Windows XP

1. Obtain the latest driver set from your direct modem supplier.

2. Open the Windows Control Panel

3. Double click the System Icon.

4. Select the Hardware tab and Select the Device Manager button.

5. Double Click the Modems item.

6. Right Click on the Motorola SM56 Modem device and select Properties from the popup

menu.

7. Select the Driver tab and press Update Driver button.

8. Follow the prompts and point to the location where you have stored the latest driver.

9. Select Yes when asked to reboot the system.

Modem Rollback Procedure (Windows XP only)

1. Open the Windows Control Panel

2. Double click the System Icon.

3. Select the Hardware tab and Select the Device Manager button.

4. Double Click the Modems item.

5. Right Click on the Motorola SM56 Speakerphone Modem device and select Properties from

the popup menu.

6. Select the Driver tab and press Roll Back Driver button.

7. Select Yes when asked to reboot the system.

8Changing the Operating System

The Motorola SM56 modem supports the following Operating Systems. For some operating

systems the drivers are the same whereas for others the drivers are different as explained in the

following table.

Operating Systems Driver Compatibility

Windows 98 Different

Windows Millennium Different

Windows 2000 and XP Same

If you upgrade from an OS to another, which uses the same driver, the SM56 will continue to

function as before. No new drivers are required.

However if you upgrade to an OS with a different set of drivers, you must get a new set of drivers

for that operating system. Contact your SM56 modem supplier for driver status and updates.

Therefore, if you change from Windows 95/98 to Windows 2000 you must get a new set of drivers

for that operating system.

9Improving Direct X Speakerphone Performance and

Quality

Important: This section applies only to Data/Fax/Speakerphone driver builds using

soft-speakerphone implementations. These drivers use Windows Direct X and the PC sound system

instead of dedicated voice hardware on the modem board (i.e. instead of voice codec and speaker

and microphone jacks on the modem board).

The following sound system tuning can be done via the Windows Master Volume control -- double

click the speaker icon in the Windows system tray. Please be aware that different sound systems

have different configuration options, so not all volume and recording windows look the same or

provide you with the same options. Or indeed some of the window and control names can be

different.

Master Volume Control (Playback/Speaker)

All balances should be muted except for the "Wave Balance" and the "Volume Control Balance".

Recording Control (Recording/Microphone)

The only balance selected should be the "Mic Balance". All the other should not be selected or

muted depending on the selections given (somewhat sound system dependent). To be sure, it is also

recommended to keep the levels of the unselected balances in the recording control window to

minimum setting. Also in case the Microphone gain is too low (rarely) then you can always boost it

up by a multiple of 10dB by going to "Options" and to "Advanced Controls" and clicking on the

"Advanced" icon. In the "Advanced Controls for Mic" window check the boost box and close the

window to boost the mic level.

Conversely, if the gain of the mic is too high and you talk too close to the mic, then the voice will be

saturated and noisy. If this is the case deselect the "Mic Boost" check box.

Otros manuales para SM56

Tabla de contenidos

Otros manuales de Módem de Motorola

Motorola

Motorola CPEi 300 Series Manual de usuario

Motorola

Motorola SBV5220 Manual de usuario

Motorola

Motorola MB7220 Manual de usuario

Motorola

Motorola SB6120 - SURFboard - 160 Mbps Cable Modem Manual

Motorola

Motorola SURFboard SBV5120 Manual de usuario

Motorola

Motorola SURFboard SBV5222 Manual de usuario

Motorola

Motorola MT8733 Manual de usuario

Motorola

Motorola VML750 Manual de usuario

Motorola

Motorola SURFboard SB5100 Manual de usuario

Motorola

Motorola SURFboard SBG900 Manual de usuario

Motorola

Motorola SURFboard SB6121 Manual de usuario

Motorola

Motorola SBV5322 SURFBOARD DIGITAL VOICE MODEM - annexe... Manual de capacitación

Motorola

Motorola VML750 Manual de usuario

Motorola

Motorola im240 - Wireless PC Card Modem Manual de usuario

Motorola

Motorola SB6120 - SURFboard - 160 Mbps Cable Modem Manual de usuario

Motorola

Motorola NETOPIA 2210-02 Manual de usuario

Motorola

Motorola SB5100 Series Manual de usuario

Motorola

Motorola SURFboard SB6182 Manual de usuario

Motorola

Motorola SURFboard SB4100 Manual de usuario

Motorola

Motorola SURFboard SBG941 Series Manual del propietario

Motorola

Motorola SURFboard SBV5322 Manual de usuario

Motorola

Motorola SURFboard SBV5222 Manual del propietario

Motorola

Motorola SURFboard SB4000 Manual de usuario

Motorola

Motorola SB5101 - SURFboard - 30 Mbps Cable Modem Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario