Motorola RS419 Manual de usuario
RS419
RING SCANNER
QUICK REFERENCE GUIDE
Motorola Solutions reserves the right to make changes to any product to improve reliability,
function, or design.
Motorola Solutions does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent
right or patent, covering or relating to any combination, system, apparatus, machine, material,
method, or process in which Motorola Solutions products might be used. An implied license exists
only for equipment, circuits, and subsystems contained in Motorola Solutions products.
Warranty
For the complete Motorola Solutions hardware product warranty statement, go to:
http://www.motorolasolutions.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If
there is a problem with the equipment, they will contact the Motorola Solution Global Customer
Support Center at: http:www.motorolasolutions.com/support.
For the latest version of this guide go to: http://supportcentral.motorola.com.
Introduction
The RS419 ring scanner is a modular, wearable laser scanner that allows the operator hands-free bar
code scanning capability. The scanner is used with the WT4090 and WT41N0 wearable terminal.
The RS419 is worn on the operator’s index finger, and utilizes a thumb-operated trigger. The
RS419 connects via an interface cable to the wearable terminal, which provides power and
performs the data collection functions. The RS419 is available in two configurations; a short cable
version for connection to a wrist mounted wearable terminal, and a long cable version for
connection to a hip mounted wearable terminal.
Scan LED
Exit Window
Finger Strap
Assembly
Connector
Scan Trigger
Trigger Assembly
Scan Assembly
Short Cable Version Shown
Changing Trigger Position
The trigger assembly of the RS419 rotates to provide left-hand or right-hand
use.
1. Determine whether the RS419 is used on the right or left hand.
2. Rotate the trigger assembly so that the scan trigger is positioned next to
the thumb when the RS419 is placed on the index finger.
Installation
The RS419 connects to the wearable terminal and mounts on the index finger.
1. On the wearable terminal, remove the connector cap.
2. Connect the RS419 interface cable to the wearable terminal interface connector. If connecting
to a wrist mounted wearable terminal, connect to the interface connector closest to the wrist.
CAUTION The trigger assembly only rotates 180° around the
back of the scan assembly. Do not rotate the trigger
assembly past the designed stops.
3. Slide the RS419 onto the index finger with the scan trigger next to the thumb.
4. Tighten the finger strap.
Scanner
Cable
Connector
Interface Connector
5. If required, cut excess finger strap material.
6. Warm boot the wearable terminal.
Using the Scanner
Not to be used in condensing environments.
To scan bar codes:
1. Turn on the wearable terminal.
2. Launch a scanning application.
3. Press the scan trigger and aim the RS419 at a bar code.
The scan LED lights red to indicate the laser is on.
4. Position the red laser beam so that it covers the entire length of the bar code.
5. If the decode is successful the LED turns green. The terminal beeps if programed accordingly.
Scanning Tips
• For larger bar codes, hold the RS419 farther away from the bar code.
• For bar codes with bars that are closer together, hold the RS419 closer to the bar code.
• The optimal scanning distance varies with bar code density, but 10 to 25 cm (4 to 10 inches)
generally works. Practice to determine what distances to work within.
• Do not position the RS419 exactly perpendicular to the bar code being scanned. In this
position, reflected light can bounce back into the exit window, and possibly prevent a
successful decode.
Finger Strap Assembly Replacement
The finger strap assembly can be changed for each user or for replacement. To replace the finger
strap assembly:
1. Press down on the finger strap assembly release tab.
2. Slide the finger strap assembly out of the trigger assembly.
3. Align a new finger strap assembly with the slot in the trigger assembly.
4. Push the finger strap assembly into the trigger assembly until the release tab clicks into place.
5. Insert your index finger through the finger strap. Tighten the strap and press the hook and pile
together.
6. If required, cut excess finger strap material.
Release Tab
Replacing the Trigger Assembly
To replace the trigger assembly:
1. Remove the finger strap assembly.
2. Turn the RS419 upside-down.
3. Remove the set screw with
screwdriver.
4. Turn the trigger assembly
counter-clockwise until the exit
window and scan trigger align.
5. Lift the trigger assembly off the scan
assembly.
6. Align replacement trigger assembly
with scan assembly.
7. Rotate trigger assembly 1/4 turn
clockwise.
8. Tighten the set screw with
screwdriver.
9. Replace finger strap assembly.
Cleaning
Approved Cleanser Active Ingredients
100% of the active ingredients in any cleaner must consist of one or some combination of the
following: isopropyl alcohol, bleach/sodium hypochlorite, hydrogen peroxide or mild dish soap.
Harmful Ingredients
The following chemicals are known to damage the plastics on the RS419 and should not come in
contact with the device: ammonia solutions, compounds of amines or ammonia; acetone; ketones;
ethers; aromatic and chlorinated hydrocarbons; acqueous or alcoholic alkaline solutions;
ethanolamine; toluene; trichloroethylene; benzene; carbolic acid and TB-lysoform.
CAUTION Always wear eye protection.
Read warning label on compressed air and alcohol product before using.
If you have to use any other solution for medical reasons please contact
Motorola Solutions for more information.
WARNING!AVOID EXPOSING THIS PRODUCT TO CONTACT WITH HOT OIL
OR OTHER FLAMMABLE LIQUIDS. IF SUCH EXPOSURE OCCURS,
UNPLUG THE DEVICE AND CLEAN THE PRODUCT IMMEDIATELY
IN ACCORDANCE WITH THESE GUIDELINES.
Otros manuales para RS419
1
Tabla de contenidos
Otros manuales de Lector de código de barras de Motorola
Motorola
Motorola DS9808 - Symbol - Wired Handheld Barcode... Guía de referencia
Motorola
Motorola Symbol MS4404 Guía de configuración rápida
Motorola
Motorola Symbol LS3578 Manual de instalación y operación
Motorola
Motorola Symbol LS4278 Manual de instalación y operación
Motorola
Motorola MC3090G - Win CE 5.0 Core Manual de usuario
Motorola
Motorola LI4278 Manual de usuario
Motorola
Motorola SYMBOL LS9203 Manual de usuario
Motorola
Motorola DS9808 - Symbol - Wired Handheld Barcode... Manual de usuario
Motorola
Motorola LS2208-SR20001R Manual de instalación y operación
Motorola
Motorola Symbol LS3008 Manual de instalación y operación
Motorola
Motorola Symbol CS3000 Series Manual de usuario
Motorola
Motorola DS9208 Manual del propietario
Motorola
Motorola LS6000B-U Manual de usuario
Motorola
Motorola CS1504 Manual de usuario
Motorola
Motorola Symbol LS1203 Manual de instalación y operación
Motorola
Motorola Symbol DS3408 Manual de instalación y operación
Motorola
Motorola Symbol LS1203 Manual de usuario
Motorola
Motorola LS4208 - Symbol - Wired Handheld Barcode... Manual de instalación y operación
Motorola
Motorola Symbol DS6878 Manual de usuario
Motorola
Motorola MP6000 Instrucciones de montaje
