Morphy Richards Steam cleaner Manual de usuario

Steam cleaner with attachments

Please read and keep these instructions

www.morphyrichards.co.uk

getting the best from your

new steam cleaner...

•Quick start

1Fill the tank up to a maximum of 1.4 litres of water (using warm

water and less water will reduce heat-up time). Screw cap on

and tighten fully.

2Attach the required accessories.

3Connect to the power supply.

4Press the on/off button to start heat-up. When orange light turns

off, the steam is ready.

5Press the trigger on the handle to release the steam.

6Aim the steam safely: Note at the start water may be ejected.

Hold over a sink or bucket until excess water has cleared.

•Descale

Descale regularly, do not wait for a problem to occur. In very hard

water areas we recommend using distilled water. See page 10 for

descaling instructions.

70530 Rev 4 2/6/04 2:53 PM Page 1

Important safety

instructions

The use of any electrical appliance

requires the following common sense safety

rules.

Primarily there is danger of injury or

death and secondly the danger of damage

to the appliance. These are indicated in the

text by the following two conventions:

WARNING: Danger to the person!

IMPORTANT: Damage to the appliance!

In addition we offer the following safety

advice.

Location

•Do not use or keep this product outside

when it is raining.

•Do not store the appliance near hot

ovens or heating appliances.

Children

•Children do not understand the dangers

associated with operating electrical

appliances. Never allow children to use

this appliance.

Personal safety

•The plug must be removed from the wall

socket before cleaning, filling the boiler

or maintaining the appliance.

•To protect against fire, electric shock and

personal injury do not immerse cord,

plug or cleaner in water or other liquid.

•Do not discharge the steam towards

people. Danger of scalding.

•Never touch the plug or cable with wet

hands.

•Never modify the cleaner in any way.

•When using the machine always keep it

horizontal.

•Steam must not be directed towards

equipment containing electrical

components, such as the interior of

ovens.

Other safety considerations

•Do not use any chemical detergents,

perfumes, alcohol etc in the water.

•Repairs to electrical appliances are only

to be undertaken by trained personnel.

Unprofessional repairs can be

dangerous for users.

•Use only genuine Goblin spare parts and

accessories.

•If the electrical cable becomes damaged

the complete cable assembly must be

replaced. Do not attempt this task

yourself, contact Goblin using the

replacement parts number on the front of

this leaflet.

•The appliance must never be left running

when unsupervised.

•This steam cleaner is intended for

domestic use only. Misuse or use for

commercial or any other purpose will

render the guarantee invalid.

Electrical requirements

Check that the voltage on the rating

plate of your unit corresponds with your

house electricity which must be A.C.

(alternating current).

If the socket outlets in your home are not

suitable for the plug supplied with this

appliance the plug should be removed and

the appropriate one fitted.

WARNING: The plug removed from the

mains lead, if severed, must be

destroyed as a plug with a bared flexible

cord is hazardous if engaged into a live

socket outlet.

WARNING: This appliance must be

earthed.

Should the fuse in the 13 amp plug require

changing a 13 amp BS1362 fuse must be

fitted.

When using this appliance outdoors it

should be additionally protected by a RCCB

(Residual Current Circuit Breaker).

70530 Rev 4 2/6/04 2:53 PM Page 2

Features

⁄ Filler cap

¤ On/off switch

‹ Tool storage cover

› Wheel

ﬁTube park (see page 9)

ﬂCarrying handle

‡ Hose

· Hose handle

‚ Trigger lock button

„ Steam ready light

‰ Power light

Â Steam trigger

⁄

‹

ﬁ

ﬂ

‡

‚

‰

„

ÂÊ

Illustration

Accessories you should have

Ê Extension tubes

Á Floor nozzle

Ë Window squeegee attachment

È Upholstery nozzle

Í Jet nozzle

Î Angled nozzle

Ï Small brush (plastic brush)

Ì Large brush (brass brush)

Ó Cotton towel

Ô Floor nozzle adjustment dial

›

 Measuring jug

Ò Elbow attachment (shown

attached to floor nozzle)

Ú Cloth cap for upholstery

nozzle

Û Funnel

Ù Jet nozzle adaptor

Accessories 15,16,17,18,

19, 20, 21, 24 and 25 are

stored beneath the tool

storage lid ‹. Lift the lid to

access.



70530 Rev 4 2/6/04 2:53 PM Page 3

Accessory assembly

Please refer to the assembly sequence to

assemble your steam cleaner.

70530 Rev 4 2/6/04 2:53 PM Page 4

Operation

Please remember that the steam cleaner

operates by emitting steam at an increased

temperature of 130˚C. Never use it on

objects or surfaces which cannot resist this

temperature, delicate materials, dralon,

plastic, natural fur etc. Where any doubt

exists check carefully on a part of the

material where minor marks will not matter.

WARNING: Always switch off, unplug

and release all steam using the steam

trigger before opening and removing the

filler cap.

Filling the boiler

Ensure steamer is unplugged from the

socket before filling or re-filling.

1Unscrew the filler cap ⁄by pressing

down and turning anti-clockwise.

2Fill the boiler with a maximum of 1.4

litres of water by using the jug

provided and funnel. Warm water may

be used which will reduce heat up

time. Do not use any detergent.

3Refit the filler cap and fully tighten by

pressing down and turning clockwise.

IMPORTANT: The water tank should be

emptied after use.

IMPORTANT: Allow the water tank to dry

out before replacing the cap.

Re-filling the boiler

WARNING: Always switch off, unplug

and release all steam using the steam

trigger before opening and removing the

filler cap.

1Before opening the filler cap to refill the

tank, release the steam pressure by

pressing the steam trigger Âon the

handle. Press until all the steam has

been expelled from the tank or allow the

cleaner to cool down completely.

2Follow ‘filling boiler instructions’ to refill.

WARNING: Even after the unit has

cooled for 5 minutes the remaining water

in the tank and the filler cap will be very

hot and can cause burns.

WARNING: The use of any other fluids

can be dangerous and can lead to

damage of the heating element.

WARNING: The filler cap must never

be opened during use.

Recommendation: The use of distilled

water is recommended especially in hard

water areas in order to prevent limescale

build up and to prolong the working life of

the cleaner.

70530 Rev 4 2/6/04 2:53 PM Page 5

On/off switch

1When the water tank has been filled, 'see

filling the boiler,' insert the plug into the

power socket.

2Switch the cleaner on by pressing the

on/off switch to 'on'. The power indicator

light (red) and the steam ready light

(orange) will illuminate.

Steam ready display

1The steam ready light (orange) will

illuminate when switched on. It will take

approximately 11 minutes to reach

temperature.

2When the correct temperature has been

reached the steam ready light (orange)

will go out. The steam cleaner is now

ready to use.

Note: The steam ready light will go on

and off during use. This is to keep the

steam at the correct temperature.

WARNING: To avoid injury, the cleaner

should be switched off during breaks or

pauses of work. For extra safety apply

the trigger safety lock.

If you leave the working area, please

switch the cleaner off and unplug.

Steam Trigger

WARNING: At the start water may be

ejected. Aim the steam safely. Start by

releasing the steam into a bucket or sink.

The cleaner is now ready for use when

the orange steam ready light goes out.

1Ensure the safety lock is off. When the

lock is pushed forward the steam trigger

cannot be activated. Push the lock to the

rear position to release the steam trigger.

2When you press the steam trigger, steam

will be emitted from the nozzle. Direct

the steam handle at a cloth first until the

steam is emitted evenly.

3Keep the steam trigger pressed and

direct the steam at the surface to be

cleaned, removing the dirt by moving the

steam jet backwards and forwards over

the area.

4To stop the steam jet, release the steam

trigger.

WARNING: Do not hold the steam jet

concentrated in one place for too long.

•To control the steam temperature and

the cleaning power move the handle

closer to or further away from the

surface.

70530 Rev 4 2/6/04 2:53 PM Page 6

Attaching tubes & handle

WARNING: Unplug the unit and allow

to cool before fitting or changing

attachments as they become hot during

use.

Attach the desired accessory to the hose

handle, extension tubes can be attached to

the handle for extra reach.

1Push the extension tubes onto the

connection nozzle as far as it will go until

you hear a click.

Some tasks may be easier with only one,

tube fitted or non at all.

2To connect the desired accessory

directly to the steam handle, slide the

handle into the accessory head or tube

until it locks in place.

Floor nozzle

The floor nozzle is used for the cleaning

of large, washable wall and floor areas. The

floor nozzle can be used with or without the

cloth cover.

•Sensitive surfaces, wood, linoleum etc.

should be used with the cloth.

IMPORTANT: When steaming sensitive

surfaces including carpets ensure the

brushes on the floor nozzle are retracted.

1Fit the elbow attachment to the floor

nozzle and twist 1/2a turn.

2Fit the floor nozzle to the extension tube

or handle.

3To fit the cloth to the floor nozzle pull the

cloth under the clips on both sides. Extra

cloths can be ordered by using our

helpline. Alternatively any strong,

uncoloured cotton cloths may be used.

•For cleaning stubborn dirt on less

sensitive surfaces, the brush fitting can

be extended by turning the dial anti-

clockwise.

70530 Rev 4 2/6/04 2:53 PM Page 7

•The cleaning power of the cloth can be

optimised by turning and changing the

cleaning cloth regularly.

•To clean very dirty areas, move the

cleaning nozzle over the surface more

slowly in order to increase the cleaning

action of the steam.

WARNING: The cleaner is not suitable

for cleaning unsealed wooden floors, soft

plastics or wooden furniture. If in doubt

check with the flooring manufacturer.

Accessory adaptor

1Push the jet nozzle adaptor as far as it

will go onto the connection nozzle until

you hear it click into place.

2The jet nozzle adaptor can be removed

again by pressing the accessory

connection button to release it.

Jet nozzle

1Push the jet nozzle directly onto the jet

nozzle adaptor and turn in a clockwise

direction to lock into place.

2It can be used with various fittings,

angled nozzle small and large brush

attachments, upholstery nozzle and

squeegee attachment depending on the

task.

•The jet nozzle can be used with various

fittings for cleaning inaccessible areas

such as corners, joints, blinds, radiators

and toilets as well as various surfaces

such as stainless steel, windows,

mirrors, enamelled surfaces and also for

stain removal.

Brush attachment

1Fit the brush attachment onto the jet

nozzle by pushing on.

2Choose the desired brush attachment for

the task.

3Pull to remove.

Upholstery attachment

1Fit the rectangular upholstery steam

nozzle to the jet nozzle by pushing on.

2This nozzle can be used with or without

the cotton cover.

3Pull to remove.

•This nozzle is ideal for cleaning

cushions, carpets and car seats.

70530 Rev 4 2/6/04 2:53 PM Page 8

Window attachment

1Locate the window squeegee onto the

two tabs at the bottom of the upholstery

nozzle. Then push the top of the

squeegee until the clip goes over the top

of the upholstery nozzle.

•This attachment is ideal for cleaning

windows, mirrors, ceramic tiles and other

non porous smooth surfaces.

•Apply the steam evenly to the glass

surface from a distance of 10-15 cm.

Then switch the steam off and wipe the

moisture off the glass from top to bottom

using the rubber squeegee. Wipe the

rubber squeegee and the lower edge of

the window. Dry after every strip.

WARNING: Glass surfaces can be

shattered by the sudden application of

excessive heat. Warm glass surfaces first

from a distance of 20-25 cm. Continue at

a distance of 10-15 cm.

Tube park

•During use the tubes and nozzle can be

stored in the park position for short

breaks whilst cleaning.

Tool storage

•The accessories for your steam cleaner

can be neatly stored in the machine

under your tool storage cover as shown.

70530 Rev 4 2/6/04 2:53 PM Page 9

After use

1Switch the cleaner off and unplug from

the socket. Wait until the cleaner has

cooled down completely.

2Release any steam pressure by pressing

the steam trigger on the handle

3Apply the steam safety lock.

4Remove the filler cap.

5Empty the water tank. Allow the inside of

the water tank to dry out before

replacing filler cap.

Rinse water tank

To clean the water tank fill it with clean

water and shake vigorously. This will

release any limescale deposits that have

collected on the bottom of the tank. Pour

the water out by holding upside down.

Descaling

In order to prolong the life of your

cleaner you should descale the steam tank

at least every 6 months.

1Switch the cleaner off, unplug and allow

to cool.

2Empty any water out of the tank.

3Mix the descaler in the measuring jug

using warm water. We recommend using

50gm of citric acid crystals per 1 litre of

water. Citric acid crystals are available

from most pharmacies.

4Pour 1 litre of the descaler solution into

the tank.

5Fit the cap and tighten fully.

6Using the handle, move the steam

cleaner about to swill the solution around

the tank.

7Leave for 30 minutes.

8Empty the solution carefully.

9Rinse the tank with clean warm water,

then empty.

10 Wipe the outside of the cleaner with a

damp cloth to remove all traces of

descaler solution.

WARNING: Do not switch on the

heater with the descaling solution inside.

70530 Rev 4 2/6/04 2:53 PM Page 10

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Aspiradora de Morphy Richards

Morphy Richards

Morphy Richards Essentials 73179 Manual de usuario

Morphy Richards

Morphy Richards Bagless Cylinder Vacuum Cleaner Manual de usuario

Morphy Richards

Morphy Richards IB73301 Manual de usuario

Morphy Richards

Morphy Richards POD CYCLONE VACUUM CLEANER - REV 1 Manual de usuario

Morphy Richards

Morphy Richards Perfom air VC71067MUK Manual de usuario

Morphy Richards

Morphy Richards ESSENTIALS CYLINDER VACUUM CLEANER - REV 3 Manual de usuario

Morphy Richards

Morphy Richards IB70045 Manual de usuario

Morphy Richards

Morphy Richards Pod vacuum cleaner Manual de usuario

Morphy Richards

Morphy Richards VC73111 MUK Manual de usuario

Morphy Richards

Morphy Richards SpillMaster Manual de usuario

Morphy Richards

Morphy Richards IB71051 Manual de usuario

Morphy Richards

Morphy Richards ESSENTIALS COMPACT BAGLESS VACUUM CLEANER - REV... Manual de usuario

Morphy Richards

Morphy Richards ESSENTIALS COMPACT BAGLESS VACUUM CLEANER Manual de usuario

Morphy Richards

Morphy Richards CYCLONIC BAGLESS VACUUM CLEANER - REV 4 Manual de usuario

Morphy Richards

Morphy Richards VC73270MUK Manual de usuario

Morphy Richards

Morphy Richards GrimeBuster steam cleaner Manual de usuario

Morphy Richards

Morphy Richards Orb vacuum cleaner Manual de usuario

Morphy Richards

Morphy Richards Bagged cylinder Vacuum Manual de usuario

Morphy Richards

Morphy Richards 70317 Manual de usuario

Morphy Richards

Morphy Richards Bagged cylinder Vacuum Manual de usuario

Morphy Richards

Morphy Richards PERFORMAIR CYCLONIC VACUUM CLEANER Manual de usuario

Morphy Richards

Morphy Richards Scoot bagless vacuum cleaner Manual de usuario

Morphy Richards

Morphy Richards IB70061 Manual de usuario

Morphy Richards

Morphy Richards Ecolectric 73383 Manual de usuario

Manuales populares de Aspiradora de otras marcas

Bissell

Bissell LittleGreen Proheat 1425 Series Manual de usuario

Panasonic

Panasonic MC-YL637S147-AE Manual de usuario

NEFF

NEFF N17XH10 0 Series Manual de usuario

LG A9 Series Manual de usuario

Oreck

Oreck Cordless Captura BK51700 Series Manual de usuario

Kogan

Kogan KAVACROBVWA Manual de usuario

Kränzle

Kränzle VENTOS 50 ID Guía del usuario

EVVO

EVVO Ai35 Manual de usuario

DeWalt

DeWalt DWH200D Manual de usuario

Pontec

Pontec Pondomatic Vacuum Cleaner Manual de usuario

Cleanmaxx

Cleanmaxx PC-P007E Manual de usuario

Exido

Exido 240-114 Manual de usuario

RIDGID

RIDGID WD1685AU0 Manual de usuario

Ezviz

Ezviz RE4P Manual de usuario

STG global

STG global TANVAC HDV3000 Manual de usuario

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manual de usuario

Factory

Factory M3340 Manual de usuario

Shop-Vac

Shop-Vac VN92 SERIES Manual de usuario