montwill M1 Manual de usuario
Technical features:
• red display of -1999…9999 digits
• minimal installation depth: 25 mm, 26 mm, 27 mm or 40 mm without plug-in terminal
• adjustment via factory default or directly on the sensor signal
• min/max-memory
• 10 adjustable supporting points
• display flashing at threshold exceedance / undershooting
• tara function
• programming interlock via access code
• protection class IP65 at the front
• plug-in terminal
• pc-based configuration software PM-TOOL with CD and USB-adapter for devices
without keypad for a simple adjustment of standard devices
User Manual M1
Current loop 4-20 mA
M1_xSGB.pdf update: 27.05.2020
Installation size 96x48 mm (BxH)
Installation size mm (BxH) Installation size 72x36 mm (BxH)
Installation size 48x24 mm (BxH)
Current loop
Identification – Current loop 4-20 mA
Please state physical unit by order, e.g. m/min
Options – breakdown of order code:
STANDARD TYPES ORDER NUMBER
Housing dimension:
96x48x38 mm (incl. plug-in terminal)
M1-1SR4B.0001.K70xD
M1-1SR4B.0001.K70xD
Housing dimension:
96x24x63 mm (incl. plug-in terminal)
M1-3SR4B.0001.K70xD
M1-3SR4B.0001.K70xD
Housing dimension:
72x36x38 mm (incl. plug-in terminal)
M1-6SR4B.0001.K70xD
M1-6SR4B.0001.K70xD
Housing dimension:
48x24x54 mm (incl. plug-in terminal) M1-7SR4A.0001.K70xD
M 1- 1 S R 4 B. 0 0 0 1. K 7 0 x D
Standard type M-Line Dimension
D physical unit
Device range 1
Version
Housing size (BxHxD) x internal version
96x48x25 mm 1
96x24x40 mm 3 Switching points
72x36x25 mm 6 0 no switching points
48x24x27 mm 7 2 PhotoMos outputs
Display type Protection class
Current loop S 1 without keypad,
operation via PM-TOOL
Display colour 7 IP65 / plug-in terminal
Red R
Voltage supply
Number of digits K via current loop
4-digit 4
Measuring input
Digit height 1 Direct current 4-20 mA
10 mm A
14 mm B Analog output
0 without
Interface
without 0 Sensor supply
0 without
Content
1. Brief description 1
2. Assembly 2
3. Electrical connection and connection examples 3
4. Function description and operation 7
4.1. Programming software PM-TOOL 8
5. Setting up the device 9
5.1. Switching on 9
5.2. Standard parameterisation (flat operation level) 9
Value assignment for control of the signal input
5.3. Programming interlock 10
Activation/Deactivation of the programming interlock or change into extended
parameterisation
5.4. Extended parameterisation 11
Superior device functions like e.g.:
- rescaling of the input signals, , 11
- parameterisation of a TARA-function, 11
- zero point slowdown of the input signal, 11
- allocation of functions onto the navigation keys, 12
- adjustment of limit values for optical alarm, 12
- safety parameter for locking of the programming, 13
- input of supporting points for the linearisation of the input signals, 14
6. Reset to default values 14
Reset of the parameter onto delivery condition
7. Alarms / Switching points 15
Functional principle of the optical switching points
8. Technical data 17
9. Safety advice 19
10. Error elimination 20
1
1. Brief description
1. Brief description
The panel instrument M1-XS is a 4-digit device fed via current loop 4-20 mA and a visual limit
value monitoring via the display. The configuration happens via three front keys or via the
optional PC-software PM-TOOL. An integrated programming interlock prevents unrequested
changes of the parameter and can be unlocked again via an individual code.
The electrical connection happens on the rear side via plug-in terminals.
Selectable functions like e.g. the recall of the min/max-value, a zero point slowdown, a direct
change of the limit value in operating mode and additional measuring supporting points for
linearisation, complete the modern device concept.
2. Assembly
Please read the Safety advice on page 19 before installation and keep this user manual for
future reference.
The example given below shows a device in housing size 96x48mm.
1. After removing the fixing elements, insert the device.
2. Check the seal to make sure it fits securely.
3. Click the fixing elements back into place and tighten the clamping screws by hand. Then
use a screwdriver to tighten them another half a turn.
CAUTION! The torque should not exceed 0.1 Nm!
Sealing
48,0
96,0
3,0
38,0
Installation depth
incl. plug-in terminal
Gap for
physical unit
2
2. Assembly
3. Electrical connection
3
3. Electrical connection
Type M1-1SR4B.0001.K70xD (Housing 96x48 mm)
Type M1-3SR4B.0001.K70xD (Housing 96x24 mm)
Type M1-6SR4B.0001.K70xD (Housing 72x36 mm)
Type M1-7SR4B.0001.K70xD (Housing 48x24 mm)
Type M1-1SR4B.0001.K72xD (Housing 96x48 mm) with switching points
Type M1-3SR4B.0001.K72xD (Housing 96x24 mm)
Type M1-6SR4B.0001.K72xD (Housing 72x36 mm)
3. Electrical connection
Connection examples
Below you find some connection examples with show practical applications:
Advice: Devices in housing size 48x24 mm do not have the input Irel+. The assignment for
Iin+, Iin- and IBhappens via terminals 2,3 and 4.
4
3. Electrical connection
5
Connection examples:
Advice:
Devices in housing size 48x24 mm do not have the input Irel+. The assignment for Iin+, Iin-
and IBhappens via terminals 2,3 and 4.
6
3. Electrical connection
(optional available in housing sizes 96x48, 96x24 & 72x36mm)
4. Function description and operation
Level Button Description
Menu level
Change to parameterization level with the relevant
parameters
For navigation at the menu level
Parameterization
level
To confirm the changes made at the parameterization
level
To change the value or setting
7
4. Function description and operation
Operation
The operation is divided into two different levels.
Menu Level
Here it is possible to navigate between the individual menu items.
Parameterization level:
The parameters stored in the menu item can be parameterized here.
Functions that can be adjusted or changed are always indicated with a flashing of the
display. Adjustments made at the parameterization level should be always confirmed by
pressing the [P] key to save them.
However, the display automatically saves all adjustments and then switches to operation
mode if no further keys are pressed within 10 seconds.
Menu level Parameterization level
Example:
Otros manuales para M1
6
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Instrumento de medición de montwill
montwill
montwill M3 Series Manual de usuario
montwill
montwill M1 Manual de usuario
montwill
montwill M2-14 Manual de usuario
montwill
montwill M2 Series Manual de usuario
montwill
montwill M3-34H Manual de usuario
montwill
montwill M3 Series Manual de usuario
montwill
montwill M3-F Manual de usuario
montwill
montwill M2 Series Manual de usuario
montwill
montwill M1 Manual de usuario
montwill
montwill M3 Series Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario