Moff Band Manual de usuario
A wearable smart toy
version 0.6
Moff Band INSTRUCTION MANUAL
Moff Band
Introduction
Package
Wearing Moff Band
Setting up Moff using a smartphone
Compatibility
Introduction
Installing Moff application
Using Moff Band
Installing and replacing Moff Band’s coin battery
Operating Moff Band
Registering Moff Band to Moff Applications
Playing with Moff Applications
Adding or deleting Moff Band
About Moff Band
Turning the power ON
Turning the power OFF
LED Patterns
Specifications
Sensor
Communication standard
Size and weight
Operating conditions
Battery and service life
Help
Warranty
Precautions about regulation and safety
FCC:Federal Communications Commission Statement
EU
others
Important information about safety
Table of contents
Note about the battery
Information about disposal and recycle
The following items are contained in the Moff Band products package.
1. a main body
2. a silicon cover
3. a wrist band
4. a coin battery(CR2032)
A main body consists of the following parts.
Introduction
Package
1.Attach a silicon cover to main body.
1 2
3 4
2.Run the wrist band to the silicon cover.
Wearing Moff Band
3.1. Put the wrist band on your dominant arm(you are right or left handed).
Then the button is in the direction of the fingertip side.
NOTE: about your dominant arm (right or left handed),this means your arm
used for everyday activities like swinging a racket,throwing a ball,and so on.
Moff Band is designed to be connected to a smartphone with Bluetooth
Smart(Bluetooth 4.0LE). To check a smartphone that is compatible with Moff
Band, please refer to http://support.moff.mobi.
Set up Moff using a smartphone
Compatibility
Installing Moff applications
About Moff Applications, you can search for Moff by inputting it in the
Application Store.If you have Moff Applications installed already,check
available updates and make sure that the latest version wii be installed.
How to download Moff Applications : please refer to the following the WEB
site. http://support.moff.mobi
Remove the battery cover.
1.Check the groove oh the battery cover is fixed.
2.Open the battery cover by rotating it about 10 degrees clockwise to open
using a coin or a screwdriver.
3.Remove the battery cover.
Using Moff Band
Installing and replacing Moff Band’ｓbattery
Removing the battery cover.
Placing the battery
4.When inserting the coin battery(CR2032),make sure that the positive(＋) is
facing in the correct direction.
5.Attach the cover of coin battery.
Align the groove of Moff Band with the tab of the battery cover.
6.Rotate the battery cover about 10 degrees counterclockwise to close using a
coin or a screwdriver.
(NOTE)
※This is a battery cover with a rubber part.After checking the battery cover with
the rubber part,attach the battery cover to Moff.
When you use a coin or a screwdriver, please use the right size. Do not push it
with more than necessary force. Doing so might damage it.
Moff Band operates with the button to turn ON or OFF.
1.From the power-off state, push the button for 0.2 sec. briefly,and the green
LED will light for 3 sec.and will off. The power is ON.
2.To make sure that the power is ON : From the power-on state, push the
button briefly for 0.2 sec. LED will not light.
(Note) LED will not light in the state that is not the battery.
3.From the power-on state, press and hold the button for 3 sec.,and the red
LED will light. If the button is released,the power is OFF.
(Note) To increase the battery life,from the power-on state,when Moff is not
connected to Applications for more than 3 minutes,the power will shut off
automatically.
Operating Moff Band
Wear Moff Band on your dominant arm(you are right or left handed).
When Moff Band is worn on your wrist, it is designed to recognize your motion
most correctly. If you need to help how to wear Moff Band, please refer to
“Wearing Moff Band”
NOTE: Before Moff Band is registered into Moff applications ,Check whether
the battery is installed in Moff Band.
NOTE: Moff Band needs to link from Moff Applications directly,not from
Applications for iOS device.
Start Moff application.
Tap 「Start」
Register Moff Band into Moff application according to directions of the
Registering Moff Band to Moff applications
screen.
If Moff Band is registered to Moff Applications、Moff Application list screen is
displayed.
Playing with Moff Applications
Tabla de contenidos
