Mitsubishi Electric E1032 Manual de usuario
MITSUBISHI ELECTRIC
E1032
Installation manual
MA00816 2006-04 English
Foreword
Mitsubishi Electric, MA00816
Installation manual for the E1000 series operator terminals
Foreword
The E1000 operator terminal is developed to satisfy the demands of human-
machine communication. Built-in functions such as displaying and controlling text,
dynamic indication, time channels, alarm and recipe handling are included.
The operator terminal work, for the most part, in an object-oriented way, making it
easy to understand and use. The configuration operation of the terminal is made in
a personal computer, using the configuration tool E-Designer. The project is then
transferred and stored in the operator terminal.
The operator terminal can be connected to many types of automation equipment,
such as PLCs, servos or drives. In this manual the expression “the controller“ is used
as a general term for the connected equipment.
This manual explains how to install the operator terminal. Please refer to the refer-
ence manual for further information.
© Mitsubishi Electric, MA00816, 2006-04
The information in this document is subject to change without notice and is provided as available at the time
of printing. The manufacturer reserves the right to change any information without updating this publication.
assumes no responsibility for any errors that may appear in this document.
Read the entire installation manual prior to installing and using this equipment.
Only qualified personnel may install, operate or repair this equipment. The manufacturer is not responsible
for modified, altered or renovated equipment.
Because the equipment has a wide range of applications, users must acquire the appropriate knowledge to use
the equipment properly in their specific applications.
Persons responsible for the application and the equipment must themselves ensure that each application is in
compliance with all relevant requirements, standards and legislation in respect to configuration and safety.
Only parts and accessories manufactured according to specifications set by The manufacturer may be used.
THE MANUFACTURER SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT,
CONTRACT, OR OTHERWISE. BUYER'S SOLE REMEDY SHALL BE THE REPAIR,
REPLACEMENT, OR REFUND OF PURCHASE PRICE, AND THE CHOICE OF THE APPLICABLE
REMEDY SHALL BE AT THE SOLE DISCRETION OF THE MANUFACTURER.
Table of Contents
Mitsubishi Electric, MA00816
Tab le of Conten t s
1 Safety Precautions................................................................................. 5
1.1 UL Installation.................................................................................. 5
1.2 General ............................................................................................. 5
1.3 During Use ....................................................................................... 5
1.4 Service and Maintenance................................................................... 6
1.5 Dismantling and Scrapping............................................................... 6
2 Installation ........................................................................................... 7
2.1 Space Requirements .......................................................................... 7
2.2 Installation Process............................................................................ 7
2.2.1 Mode Switches .................................................................................................. 9
2.2.2 Connections to the Controller........................................................................... 9
2.2.3 Other Connections and Peripherals................................................................... 9
3 Technical Data ................................................................................... 11
4 Chemical Resistance ........................................................................... 13
4.1 Metal Casing................................................................................... 13
4.2 Keyboard and Display..................................................................... 13
4.2.1 Display Surface................................................................................................ 13
4.2.2 Autotex F157................................................................................................... 14
5 Operator Terminal Drawings ............................................................. 17
5.1 Communication Ports..................................................................... 17
5.2 E1032 Outline................................................................................ 18
5.3 E1032 Text Strip ............................................................................ 19
Table of Contents
Mitsubishi Electric, MA00816
Safety Precautions
Mitsubishi Electric, MA00816 5
1 Safety Precautions
Both the installer and the owner and/or operator of the operator terminal must read
and understand this installation manual.
1.1 UL Installation
Power, input and output (I/O) wiring must be in accordance with Class 1, Division
2 wiring methods (Article 501-4 (b) of the National Electric Code, NFPA 70) and
in accordance with the authority having jurisdiction.
1.2 General
– Only qualified personnel may install or operate the operator terminal.
– The operator terminal must be installed according to the installation instructions.
– The operator terminal is designed for stationary installation on a plane surface,
where the following conditions are fulfilled:
• no high explosive risks
• no strong magnetic fields
•nodirectsunlight
• no large, sudden temperature changes
– Never allow fluids, metal filings or wiring debris to enter any openings in the
operator terminal. This may cause fire or electrical shock.
– The operator terminal fulfills the requirements of article 4 of EMC directive
89/336/EEC.
– Storing the operator terminal where the temperature is lower/higher than
recommended in this manual can cause the LCD display liquid to congeal/become
isotopic.
– The LCD display liquid contains a powerful irritant. In case of skin contact, wash
immediately with plenty of water. In case of eye contact, hold the eye open, flush
with plenty of water and get medical attention.
– The supplier is not responsible for modified, altered or reconstructed equipment.
– Use only parts and accessories manufactured according to specifications of the
supplier.
– Peripheral equipment must be appropriate for the application and location.
– The figures in this manual serves an illustrative purpose. Because of the many
variables associated with any particular installation, the supplier cannot assume
responsibility for actual use based on the figures.
– The supplier neither guarantees that the operator terminal is suitable for your
particular application, nor assumes responsibility for your product design,
installation or operation.
1.3 During Use
– Keep the operator terminal clean.
– Emergency stop and other safety functions may not be controlled from the
operator terminal.
– Do not use too much force or sharp objects when touching the keys, display etc.
Safety Precautions
6Mitsubishi Electric, MA00816
1.4 Service and Maintenance
– Only qualified personnel should carry out repairs.
– The agreed warranty applies.
– Before carrying out any cleaning or maintenance operations, disconnect the
equipment from the electrical supply.
– Clean the display and surrounding front cover with a soft cloth and mild
detergent.
– Replacing the battery incorrectly may result in explosion. Only use batteries
recommended by the supplier.
1.5 Dismantling and Scrapping
– The operator terminal or parts thereof shall be recycled according to local
regulations.
– The following components contain substances that might be hazardous to health
and the environment: lithium battery, electrolytic capacitor and display.
Installation
Mitsubishi Electric, MA00816 7
2 Installation
2.1 Space Requirements
– Installation plate thickness: 1.5 - 7.5 mm (0.06 - 0.3 inch)
– Space requirements when installing the operator terminal:
Caution
The openings on the enclosure are for air convection. Do not cover these
openings.
2.2 Installation Process
1. Unpack and check the delivery. If damage is found, notify the supplier.
Note:
Place the operator terminal on a stable surface during installation.
Dropping it or letting it fall may cause damage.
2. Place the panel cut out where the operator terminal is to be situated, draw along
the outer sides of the holes and cut according to the markings. If access to the
text strips is needed, add extra space at the left side.
187 mm
56.9 mm
100 mm
(4.0 inch)
50 mm
(2.0 inch)
50 mm
(2.0 inch)
100 mm
(4.0 inch)
(7.36 inch)
202 mm
100 mm
(4.0 inch)
(7.95 inch)
(2.24 inch)
x4
Panel cut out 166 x 149 mm
(6.54 x 5.87 inch)
For text strip
7.0 mm
14.0 mm
(0.55 inch)
(0.28 inch)
Installation
8Mitsubishi Electric, MA00816
3. Secure the operator terminal in position, using all the fastening holes and the
provided brackets and screws:
4. Connect the cables in the specified order.
Use an M5 screw and a grounding conductor (as short as possible)
with a cross-section of minimum 2.5 mm2.
5. Carefully remove the laminated film over the operator terminal display, to avoid
static electricity that could damage the terminal.
x 4
0.5 - 1.0 Nm
B
C
D
ACaution
Ensure that the operator terminal and the controller system have the
same electrical grounding (reference voltage level), otherwise errors
in communication may occur.
Caution
- Use only shielded communication cables.
- Separate high voltage cables from signal and supply cables.
Caution
- The operator terminal must be brought to ambient temperature
before it is started up. If condensation forms, ensure that the
operator terminal is dry before connecting it to the power outlet.
- Ensure that the voltage and polarity of the power source is correct.
24V DC
RS422/
RS485
RS232
24V DC
A
D
Controller
Power
C
B
Ethernet
Installation
Mitsubishi Electric, MA00816 9
2.2.1 Mode Switches
All mode switches must be in OFF position during operator terminal use.
The mode switches should not be touched unless by qualified personell.
2.2.2 Connections to the Controller
For information about the cables to be used when connecting the operator terminal
to the controller, please refer to the help file for the driver in question.
2.2.3 Other Connections and Peripherals
Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
1234
ON DIP
1234
ON DIP
Installation
10 Mitsubishi Electric, MA00816
Otros manuales para E1032
1
Tabla de contenidos
Otros manuales de Terminal táctil de Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric GT1665HS-VTBD Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GT2512-STBA Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GT1155-QTBD Guía del usuario
Mitsubishi Electric
Mitsubishi Electric E1071 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GOT 1000 Series Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GOT2000 Series Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GOT1000 GT14 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GOT2000 Series Manual de instrucciones
Mitsubishi Electric
Mitsubishi Electric GOT 1000 Series Manual de instrucciones
Mitsubishi Electric
Mitsubishi Electric FA-TH16XRA20S Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GT16 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GOT SIMPLE GS2107-WTBD Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GT1685 Manual de instrucciones
Mitsubishi Electric
Mitsubishi Electric GOT SIMPLE Series Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GOT 1000 Series Manual de instrucciones
Mitsubishi Electric
Mitsubishi Electric GOT 1000 Series Manual de instrucciones
Mitsubishi Electric
Mitsubishi Electric GT14 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric GT2508-VTBA Manual de usuario
Mitsubishi Electric
Mitsubishi Electric E1061 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric A960GOT Manual de usuario
