Mitsubishi Electric MELSEC FX2N-32DP-IF Manual de usuario

HARDWARE MANUAL

FX2N-32DP-IF Profibus-DP Interface Unit

Foreword

• This manual contains text, diagrams and explanations which will guide the reader in the correct installation

and operation of the FX2N-32DP-IF Profibus-DP Interface Unit. It should be read and understood before

attempting to install or use the unit.

• For operation and setting of FX2N-32DP-IF Profibus-DP Interface Unit, refer to FX2N-32DP-IF User’s Manual.

Further information can be found in the FX2N Series Hardware Manual, manuals for special function blocks

and Profibus-DP master programmable controllers.

• If in doubt at any stage during the installation of the FX2N-32DP-IF Profibus-DP Interface Unit always consult

a professional electrical engineer who is qualified and trained to the local and national standards.

• If in doubt about operation or use of the FX2N-32DP-IF Profibus-DP Interface Unit please consult the nearest

Mitsubishi Electric distributor.

• This manual is subject to change without notice.

FX2N-32DP-IF Profibus-DP

Interface Unit

Hardware Manual

FX2N-32DP-IF Profibus-DP Interface Unit

Manual number : JY992D77101

Manual revision : E

Date : November 2008

FX2N-32DP-IF Profibus-DP Interface Unit

iii

Guidelines for the Safety of the User and Protection of the FX2N-32DP-IF

Profibus-DP Interface Unit.

This manual provides information for the use of the FX2N-32DP-IF Profibus-DP Interface Unit.

The manual has been written to be used by trained and competent personnel. The definition of

such a person or persons is as follows:

a) Any engineer who is responsible for the planning, design and construction of automatic

equipment using the product associated with this manual, should be of a competent

nature, trained and qualified to the local and national standards required to fulfill that

role. These engineers should be fully aware of all aspects of safety with regards to

automated equipment.

b) Any commissioning or service engineer must be of a competent nature, trained and

qualified to the local and national standards required to fulfill that job. These engineers

should also be trained in the use and maintenance of the completed product. This

includes being completely familiar with all associated documentation for said product. All

maintenance should be carried out in accordance with established safety practices.

c) All operators of the completed equipment should be trained to use that product in a safe

and coordinated manner in compliance to established safety practices. The operators

should also be familiar with documentation which is connected with the actual operation

of the completed equipment.

Note : The term ‘completed equipment’ refers to a third party constructed device which

contains or uses the product associated with this manual.

FX2N-32DP-IF Profibus-DP Interface Unit

Note’s on the Symbols Used in this Manual

At various times through out this manual certain symbols will be used to highlight points of

information which are intended to ensure the users personal safety and protect the integrity of

the equipment. Whenever any of the following symbols are encountered its associated note

must be read and understood. Each of the symbols used will now be listed with a brief

description of its meaning.

Hardware Warnings

1) Indicates that the identified danger WILL cause physical and property damage.

2) Indicates that the identified danger could POSSIBLY cause physical and property

damage.

3) Indicates a point of further interest or further explanation.

Software Warnings

4) Indicates special care must be taken when using this element of software.

5) Indicates a special point which the user of the associate software element should

be aware.

6) Indicates a point of interest or further explanation.

FX2N-32DP-IF Profibus-DP Interface Unit

• Under no circumstances will Mitsubishi Electric be liable responsible for any consequential

damage that may arise as a result of the installation or use of this equipment.

• All examples and diagrams shown in this manual are intended only as an aid to

understanding the text, not to guarantee operation. Mitsubishi Electric will accept no

responsibility for actual use of the product based on these illustrative examples.

• Please contact a Mitsubishi distributor for more information concerning applications in life

critical situations or high reliability.

FX2N-32DP-IF Profibus-DP Interface Unit

vii

Table of Contents

Safety Guidelines ................................................................................ iii

1. Introduction............................................................................................1-1

1.1 Features of the 32DP-IF ...................................................................................... 1-1

1.2 External Dimensions and Each Part Name ......................................................... 1-2

1.2.1 Pin Configuration....................................................................................................... 1-4

1.3 System Configuration .......................................................................................... 1-5

1.3.1 Connected Monitoring Tools ..................................................................................... 1-6

1.3.2 Connected Extension Blocks and Units .................................................................... 1-7

1.3.3 Configuration Rules Reference ................................................................................. 1-8

2. Mounting and Wiring .............................................................................2-1

2.1 Mounting.............................................................................................................. 2-1

2.1.1 Mounting Arrangements ............................................................................................ 2-1

2.1.2 Mounting.................................................................................................................... 2-3

2.2 Caution for Wiring................................................................................................ 2-5

2.3 Power Supply ...................................................................................................... 2-9

2.3.1 AC Power Supply Type: FX2N-32DP-IF .................................................................. 2-10

2.3.2 DC Power Supply Type: FX2N-32DP-IF-D .............................................................. 2-12

2.4 Profibus-DP Network ......................................................................................... 2-14

2.5 Wiring for Connecting to Extension Blocks/Units and Special Function Blocks 2-16

FX2N-32DP-IF Profibus-DP Interface Unit

viii

3. Specifications ........................................................................................3-1

3.1 General Specifications......................................................................................... 3-1

3.2 Power Supply Specifications ............................................................................... 3-2

3.3 Performance Specifications................................................................................. 3-3

4. Address Setting .....................................................................................4-1

4.1 Setting the Address ............................................................................................. 4-1

4.2 Example Address Setting .................................................................................... 4-2

5. Diagnostics............................................................................................5-1

5.1 Preliminary Checks.............................................................................................. 5-1

5.2 Check the Status of the LEDs of the 32DP-IF ..................................................... 5-2

Appendix A

Further Information Manual Lists.............................................................. A-1

Appendix B

Update History of FX2N-32DP-IF and GSD File ....................................... B-1

Tabla de contenidos

Otros manuales de Controladores de Mitsubishi Electric

Mitsubishi Electric

Mitsubishi Electric FX2N-485-BD Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSERVO-JET MR-JET-G-N1 Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Central Controller G-50A Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC-Q-MR-JE-C Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC FX2N-16SW Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSERVO-JET MR-JET Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric FX5 MELSEC iQ-F FX5-4LC Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC-Q/L Manual del propietario

Mitsubishi Electric

Mitsubishi Electric MELSEC FX2N-16CCL-M Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSERVO JET Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-YG66 DCA-J Manual de servicio

Mitsubishi Electric

Mitsubishi Electric FX3U-64DP-M Manual de usuario

Mitsubishi Electric

Mitsubishi Electric FX3G SERIES Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F FX5 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC-F FX-USB-AW Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MR-J2S B Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MR-J5-G Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric FX3GE-24M series Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario