Mitsubishi Electric MELSEC Q Series Manual de usuario

CC-Link/LT Master Module

User's Manual

-QJ61CL12

Downloaded from ManualsNet.com search engine

SAFETY PRECAUTIONS

(Read these precautions before using this product.)

Before using this product, please read this manual and the relevant manuals carefully and pay full attention

to safety to handle the product correctly.

The precautions given in this manual are concerned with this product only. For the safety precautions of the

programmable controller system, refer to the user's manual for the CPU module used.

In this manual, the safety precautions are classified into two levels: " WARNING" and " CAUTION".

Under some circumstances, failure to observe the precautions given under " CAUTION" may lead to

serious consequences.

Observe the precautions of both levels because they are important for personal and system safety.

Make sure that the end users read this manual and then keep the manual in a safe place for future

reference.

[Design Precautions]

WARNING

●For the operating status of each station after a communication failure in the data link, refer to Page 64,

Section 6.1 in this manual.

●When connecting peripheral devices to the CPU module, create interlock circuits in the sequence

programs so that the safety of the whole system will be ensured.

For other forms of control (such as program modification or operating status change) of a running

programmable controller, read the relevant manuals carefully and ensure that the operation is safe

before proceeding.

Especially, when a remote programmable controller is controlled by an external device, immediate

action cannot be taken if a problem occurs in the programmable controller due to a communication

failure.

To prevent this, configure an interlock circuit in the sequence program, and determine corrective

actions to be taken between the external device and programmable controller CPU in case of a

communication failure.

●Do not write data to "Prohibited area" of the buffer memory.

Doing so may cause malfunction of the programmable controller system.

WARNING

CAUTION

Indicates that incorrect handling may cause hazardous conditions,

resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous conditions,

resulting in minor or moderate injury or property damage.

Downloaded from ManualsNet.com search engine

[Design Precautions]

[Installation Precautions]

CAUTION

●Do not install the control lines or communication cables together with the main circuit lines or power

cables.

Keep a distance of 100mm or more between them.

Failure to do so may result in malfunction due to noise.

CAUTION

●Use the programmable controller in an environment that meets the general specifications in the user's

manual for the CPU module used.

Failure to do so may result in electric shock, fire, malfunction, or damage to or deterioration of the

product.

●To mount the module, while pressing the module mounting lever located in the lower part of the

module, fully insert the module fixing projection(s) into the hole(s) in the base unit and press the

module until it snaps into place.

Incorrect mounting may cause malfunction, failure or drop of the module.

When using the programmable controller in an environment of frequent vibrations, fix the module with

a screw.

Tighten the screw within the specified torque range.

Undertightening can cause drop of the screw, short circuit or malfunction.

Overtightening can damage the screw and/or module, resulting in drop, short circuit, or malfunction.

●Shut off the external power supply (all phases) used in the system before mounting or removing a

module.

Failure to do so may result in damage to the product.

●Do not directly touch any conductive parts and electronic components of the module.

Doing so can cause malfunction or failure of the module.

Downloaded from ManualsNet.com search engine

[Wiring Precautions]

WARNING

●Shut off the external power supply (all phases) used in the system before wiring.

Failure to do so may result in electric shock or damage to the product.

CAUTION

●Prevent foreign matter such as dust or wire chips from entering the module.

Such foreign matter can cause a fire, failure, or malfunction.

●A protective film is attached to the top of the module to prevent foreign matter, such as wire chips,

from entering the module during wiring.

Do not remove the film during wiring.

Remove it for heat dissipation before system operation.

●Use cables specified by CC-Link Partner Association for a CC-Link/LT system.

If not, the performance of the CC-Link/LT system is not guaranteed.

Also, observe the network wiring specifications given in Page 28, Section 3.1.1.

If not, normal data transmission is not guaranteed.

●Place the cables in a duct or clamp them.

If not, dangling cable may swing or inadvertently be pulled, resulting in damage to the module or

cables or malfunction due to poor contact.

●When disconnecting a communication cable or power cable from the module, do not hold and pull the

cable portion by hand.

For the cable with connector, hold the connector part of the cable.

For the cable connected to the terminal block, loosen the terminal screw.

Pulling the cable connected to the module may result in malfunction or damage to the module or

cable.

Downloaded from ManualsNet.com search engine

[Startup and Maintenance Precautions]

[Disposal Precautions]

CAUTION

●Do not disassemble or modify the modules.

Doing so may cause failure, malfunction, injury, or a fire.

●Use any radio communication device such as a cellular phone or PHS (Personal Handy-phone

System) more than 25cm away in all directions from the programmable controller.

Failure to do so may cause malfunction.

●Shut off the external power supply (all phases) used in the system before mounting or removing a

module.

Failure to do so may cause the module to fail or malfunction.

●Do not touch any terminal while power is on. Doing so may cause malfunction.

●Shut off the external power supply (all phases) used in the system before cleaning the module or

retightening the terminal screws or module mounting screws.

Failure to do so may cause the module to fail or malfunction.

Undertightening can cause drop of the screw, short circuit or malfunction.

Overtightening can damage the screw and/or module, resulting in drop, short circuit, or malfunction.

●After the first use of the product, do not mount/remove the module to/from the base unit, and the

terminal block to/from the module more than 50 times (IEC 61131-2 compliant) respectively.

Exceeding the limit of 50 times may cause malfunction.

●Before handling the module, touch a grounded metal object to discharge the static electricity from the

human body.

Failure to do so may cause the module to fail or malfunction.

CAUTION

●When disposing of this product, treat it as industrial waste.

Downloaded from ManualsNet.com search engine

CONDITIONS OF USE FOR THE PRODUCT

(1) Mitsubishi programmable controller ("the PRODUCT") shall be used in conditions;

i) where any problem, fault or failure occurring in the PRODUCT, if any, shall not lead to any major

or serious accident; and

ii) where the backup and fail-safe function are systematically or automatically provided outside of

the PRODUCT for the case of any problem, fault or failure occurring in the PRODUCT.

(2) The PRODUCT has been designed and manufactured for the purpose of being used in general

industries.

MITSUBISHI SHALL HAVE NO RESPONSIBILITY OR LIABILITY (INCLUDING, BUT NOT

LIMITED TO ANY AND ALL RESPONSIBILITY OR LIABILITY BASED ON CONTRACT,

WARRANTY, TORT, PRODUCT LIABILITY) FOR ANY INJURY OR DEATH TO PERSONS OR

LOSS OR DAMAGE TO PROPERTY CAUSED BY the PRODUCT THAT ARE OPERATED OR

USED IN APPLICATION NOT INTENDED OR EXCLUDED BY INSTRUCTIONS, PRECAUTIONS,

OR WARNING CONTAINED IN MITSUBISHI'S USER, INSTRUCTION AND/OR SAFETY

MANUALS, TECHNICAL BULLETINS AND GUIDELINES FOR the PRODUCT.

("Prohibited Application")

Prohibited Applications include, but not limited to, the use of the PRODUCT in;

• Nuclear Power Plants and any other power plants operated by Power companies, and/or any

other cases in which the public could be affected if any problem or fault occurs in the PRODUCT.

• Railway companies or Public service purposes, and/or any other cases in which establishment of

a special quality assurance system is required by the Purchaser or End User.

• Aircraft or Aerospace, Medical applications, Train equipment, transport equipment such as

Elevator and Escalator, Incineration and Fuel devices, Vehicles, Manned transportation,

Equipment for Recreation and Amusement, and Safety devices, handling of Nuclear or

Hazardous Materials or Chemicals, Mining and Drilling, and/or other applications where there is a

significant risk of injury to the public or property.

Notwithstanding the above, restrictions Mitsubishi may in its sole discretion, authorize use of the

PRODUCT in one or more of the Prohibited Applications, provided that the usage of the PRODUCT

is limited only for the specific applications agreed to by Mitsubishi and provided further that no

special quality assurance or fail-safe, redundant or other safety features which exceed the general

specifications of the PRODUCTs are required. For details, please contact the Mitsubishi

representative in your region.

Downloaded from ManualsNet.com search engine

REVISIONS

*The manual number is given on the bottom left of the back cover.

Japanese manual version SH-080344-K

Print date *Manual number Revision

Sep., 2002 SH(NA)-080351E-A First edition

Feb., 2003 SH(NA)-080351E-B

Section 2.1, 2.2.2, 3.1.1, 4.5.2, 6.6

Mar., 2004 SH(NA)-080351E-C

Section 4.5.2, 4.5.3

Partial correction

Section 1.2, 3.1, 4.1, 4.2.3, 4.5, 4.5.4, 6.7

Jan., 2005 SH(NA)-080351E-D

SAFETY PRECAUTIONS, Generic Terms and Abbreviations,

Section 1.1, 2.1, 2.2.2, 2.2.3, 3.1, 3.1.1, 3.3.2, 4.1, 4.2.1, Chapter 5, Section 6.2, 6.3.1

to 6.3.4, 6.4, 6.4.1 to 6.4.5, 6.6, 6.7

Mar., 2006 SH(NA)-080351E-E

SAFETY PRECAUTIONS, Conformation to the EMC Directive and Low Voltage

Instruction, Section 2.2.1, 2.2.2, 3.1.1

Nov., 2006 SH(NA)-080351E-F

INDEX

Oct., 2008 SH(NA)-080351E-G

SAFETY PRECAUTIONS, Compliance with the EMC and Low Voltage Directives,

Generic Terms and Abbreviations, Section 2.2.1, 2.2.3, 4.1, 4.2.1, 4.3, 4.5, 6.7,

Appendix 1

Sep., 2010 SH(NA)-080351E-H

"PLC" was changed to "programmable controller".

CONDITIONS OF USE FOR THE PRODUCT,

SAFETY PRECAUTIONS, Compliance with the EMC and Low Voltage Directive,

Generic Terms and Abbreviations,

Section 2.2.1, 2.2.2, 2.2.3, 4.4, 4.5.1, 4.5.5, 6.6, WARRANTY

Oct., 2011 SH(NA)-080351E-I The manual layout was wholly changed.

This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric

Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the

contents noted in this manual.

Correction

Addition

Partial correction

Change

Addition

Partial correction

Downloaded from ManualsNet.com search engine

INTRODUCTION

Thank you for purchasing the Mitsubishi MELSEC-Q series programmable controllers.

This manual describes the functions and programming of the QJ61CL12 CC-Link/LT master module (hereafter

abbreviated as QJ61CL12).

Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the

functions and performance of the MELSEC-Q series programmable controller to handle the product correctly.

When applying the program examples introduced in this manual to an actual system, ensure the applicability and

confirm that it will not cause system control problems.

Please make sure that the end users read this manual.

COMPLIANCE WITH EMC AND LOW VOLTAGE

DIRECTIVES

(1) Method of ensuring compliance

To ensure that Mitsubishi programmable controllers maintain EMC and Low Voltage Directives when incorporated

into other machinery or equipment, certain measures may be necessary. Please refer to the manual included with

the CPU module or base unit.

The CE mark on the side of the programmable controller indicates compliance with EMC and Low Voltage

Directives.

(2) Additional measures

To ensure that this product maintains EMC and Low Voltage Directives, please refer to the manual included with

the CPU module or base unit.

Downloaded from ManualsNet.com search engine

RELEVANT MANUALS

(1) CPU module user's manual

(2) Operating manual

Manual name

<manual number (model code)> Description

QCPU User's Manual

(Hardware Design, Maintenance and Inspection)

<SH-080483ENG, 13JR73>

Specifications of the hardware (CPU modules, power supply modules,

base units, batteries, and memory cards), system maintenance and inspection,

and troubleshooting

QnUCPU Users Manual

(Function Explanation, Program Fundamentals)

<SH-080807ENG, 13JZ27>

Functions and devices of the CPU module, and programming

Qn(H)/QnPH/QnPRHCPU User's Manual

(Function Explanation, Program Fundamentals)

<SH-080808ENG, 13JZ28>

Functions and devices of the CPU module, and programming

Manual name

<manual number (model code)> Description

GX Developer Version 8 Operating Manual

<SH-080373E, 13JU41>

Operating methods of GX Developer, such as programming, printing,

monitoring, and debugging

Downloaded from ManualsNet.com search engine

Otros manuales para MELSEC Q Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Mitsubishi Electric

Mitsubishi Electric

Mitsubishi Electric AJ65FBTA42-16DT Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Trane TE-200A Manual de usuario

Mitsubishi Electric

Mitsubishi Electric A1SD75P1-S3 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q2MEM-1MBSN Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MN Converter Manual de usuario

Mitsubishi Electric

Mitsubishi Electric A173UHCPU Manual de usuario

Mitsubishi Electric

Mitsubishi Electric EMU4-CNT-MB Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manual de instalación y funcionamiento

Mitsubishi Electric

Mitsubishi Electric RD81DL96 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric QJ71DN91 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric EB-50GU-A Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric FR-PU04 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric FX-USB-AW Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q173HCPU Manual de usuario

Mitsubishi Electric

Mitsubishi Electric NZ2GF-ETB Manual de usuario

Mitsubishi Electric

Mitsubishi Electric EHPT Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric AJ65VBTS32-16DT Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-AH125 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric SWL31-ETMC Manual de usuario

Mitsubishi Electric

Mitsubishi Electric AJ65BT-RPI-10A Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC-QS Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric GT16H-CNB-42S Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R60DA4 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario