Air-Conditioners For Building Application
Remote Sensor PAC-SE41TS-E
Installation Manual
For your safety, first be sure to read “ 1 Safety Precautions “ described below thoroughly and then install the Remote Sensor PAC-SE41TS-E
correctly.
This symbol denotes what could lead to serious injury or death if your misuse the PAC-SE41TS-E.
This symbol denotes what could lead to a personal injury or damage to your property if you misuse the PAC-SE41TS-E.
●The following two symbols are used to denote dangers that may be caused by incorrect use and their degree:
●After reading this installation manual, keep it in a place where the final user can see it anytime he or she wants to it.
When someone moves, repairs or uses the PAC-SE41TS-E, make sure that this manual is forwarded to the final user.
1 Safety Precautions
.WARNING
.CAUTION
.WARNING
.CAUTION
WT02927X03
2 Confirming the Supplied Parts
Confirm that following parts are enclosed in the box in addition to this Installation Manual.
(1)Remote sensor unit · · · · · · · · · · · · · · · · ·1
(2)2-core cable (12m) · · · · · · · · · · · · · · · · ·1
(3)Wood screw 4.1X16 · · · · · · · · · · · · · · · · 2
(4)Post for connection · · · · · · · · · · · · · · · · ·1
(5)Convert cable · · · · · · · · · · · · · · · · · · · · · ·2
■Ask your dealer or technical representative to install the unit.
Any deficiency caused by your own installation may result in an elec-
tric shock or fire.
■Install in a place which is strong enough to withstand the
weight of the PAC-SE41TS-E.
Any lack of strength may cause the PAC-SE41TS-E to fall down,
resulting in personal injury.
■Firmly connect the wiring using the specified cables.
Carefully check that the cables do not exert any force on the
terminals.
Improper wiring connections may produce heat and possibly a fire.
■Never modify or repair the PAC-SE41TS-E by yourself.
Any deficiency caused by your modification or repair may result in
an electric shock or fire.
Consult with your dealer about repairs.
■Ensure that installation work is done correctly following this
installation manual.
Any deficiency caused by installation may result in an electric shock
or fire.
■All electrical work must be performed by a licensed techni-
cian, according to local regulations and the instructions given
in this manual.
Any lack of electric circuit or any deficiency caused by installation
may result in an electric shock or fire.
■Do not move and re-install the PAC-SE41TS-E yourself.
Any deficiency caused by installation may result in an electric shock
or fire.
Ask your distributor or special vendor for moving and installation.
■
Do not turn on the main power until installation has been completed.
Fail to do so may cause an electric shock or fire.
■Do not install in any place exposed to flammable gas leakage.
Flammable gases accumulated around the body of PAC-SE41TS-E
may cause an explosion.
■Do not use in any special environment.
Using in any place exposed to oil (including machine oil), steam and
sulfuric gas may deteriorate the performance significantly or give
damage to the component parts.
■Wire so that it does not receive any tension.
Tension may cause wire breakage, heating or fire.
■Completely seal the wire lead-in port with putty etc.
Any dew, moisture, cockroaches, insects entering the unit may
cause an electric shock or a malfunction.
■Do not wash with water.
Doing so may cause an electric shock or a malfunction.
■Do not install in any place where acidic or alkaline solution or
special spray are often used.
Doing so may cause an electric shock or malfunction.
■Use standard wires in compliance with the current capacity.
A failure to this may result in an electric leakage, heating or fire.
■
Do not install in any steamy place such a bathroom or kitchen.
Avoid any place where moisture is condensed into dew.
Doing so may cause an electric shock or a malfunction.
■Do not touch any PCB (Printed Circuit Board) with your hands
or with tools. Do not allow dust to collect on the PCB.
Doing so may cause fire or an electric shock.
■Do not install in any place at a temperature of more than 40°C
or less than 0°C or exposed to direct sunlight.
Additional Precautions
■If the supply cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to
avoid a hazard.
■This appliance is not intended for use by persons (including chil-
dren) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given super-
vision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
■This appliance is intended to be used by expert or trained users in
shops, in light industry and on farms, or for commercial use by lay
persons.
