MinimumRC Minimoa Manual de usuario

Tabla de contenidos

Otros manuales de Juguete de MinimumRC

MinimumRC

MinimumRC NANCHANG CJ-6 Manual de usuario

MinimumRC

MinimumRC KI-61 Tony Manual de usuario

MinimumRC

MinimumRC F8F-RareBear Pro Manual de usuario

MinimumRC

MinimumRC P-51 Mustang Manual de usuario

MinimumRC

MinimumRC F4U Corsair Manual de usuario

MinimumRC

MinimumRC Shrimp V2 Manual de usuario

MinimumRC

MinimumRC F8F Rare Bear Manual

MinimumRC

MinimumRC Ju-87 Manual de usuario

MinimumRC

MinimumRC Spitfire Manual de usuario

MinimumRC

MinimumRC PZL106 Q Series Manual de usuario

MinimumRC

MinimumRC Messerschmitt BF-109 Manual de usuario

MinimumRC

MinimumRC Cessna-152 Manual de usuario

MinimumRC

MinimumRC LISA Manual de usuario

MinimumRC

MinimumRC Flycat Manual de usuario

MinimumRC

MinimumRC Tigermoth Manual de usuario

MinimumRC

MinimumRC Beech V-35 Manual de usuario

MinimumRC

MinimumRC ASG-32 Manual de usuario

MinimumRC

MinimumRC Cessna L-19 Manual de usuario

MinimumRC

MinimumRC Vulcanair P-68 Manual de usuario

MinimumRC

MinimumRC Piper Cub J-3 Manual de usuario

MinimumRC

MinimumRC Spacewalker V2 Manual de usuario

MinimumRC

MinimumRC DH-88 Comet Manual de usuario

MinimumRC

MinimumRC J-3 Manual de usuario

MinimumRC

MinimumRC P-51 Mustang Manual de usuario

Manuales populares de Juguete de otras marcas

marklin

marklin 37321 Manual de usuario

Canon

Canon PAPER CRAFT Manual de usuario

GREAT PLANES

GREAT PLANES Pitts M-12S Manual de usuario

NOCH

NOCH 14261 Manual de usuario

Hausler

Hausler 450 SE V2 Manual de usuario

Dynaflite

Dynaflite Daydream Manual de usuario

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manual

Kenner

Kenner Batman 63651 Manual de usuario

LEGO

LEGO 8527 Manual de usuario

iKarus

iKarus ECO 8 Manual de usuario

Multiplex

Multiplex EasyStar II Manual de instrucciones

Walkera

Walkera 38 Manual de instrucciones

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manual de usuario

MD

MD MXION SWD Manual de usuario

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manual de usuario

marklin

marklin 39671 Manual de usuario

Meccano

Meccano 15103 Manual de usuario

LEGO

LEGO TECHNIC 8735 Manual de usuario

Assembly Instructions

Important notification

1.The model is supplied with UFO and 502 glue. UFO is for bonding foam parts, and 502 for

bonding wood, carbon fiber and metal parts. 502 glue will cause serious corrosion to foam parts.

2.Please wait for the glue to dry and solidify in each installation step before the next installation.

3.Please avoid using flame to heat the heat shrinkable tube on the model. Electric iron shall be

used for heating.

4.Please use razor blade to remove the parts from the plate. Do not tear the parts by force.

1. assemble the wooden base.

2. Wooden parts of the fuselage.

3. Assemble the wooden parts of the fuselage. Please pay attention to the opening direction of

the servo base and do not reverse it.

4. fix the motor with a tie, and the fixed end of the tie should be just at the bottom. After fixing,

502 glue shall be applied to the side for reinforcement.

5. Details.

6. Connect the servos to a powered receiver. Bind the receiver with your transmitter to make the

servos arms return to their neutral point. Test whether the servos are working correctly, and

install the servo arms according to the position shown in the picture.

Note: Please make sure that the servos have been tested and installed in strict accordance with

the following picture. After assembling the model, it will be not able to adjust.

7. (bottom view) The servos are installed and fixed under the plywood board.

8. Align the scribed line on the inner side of the fuselage and fix the wooden s tructure with glue.

9. Press the top and bottom strip of the fuselage and bend them into the corresponding shape of

the fuselage.

10. Fix the top and bottom strip of the fuselage with glue.

11. Details: cut off the position where the fuselage side strip interferes with the tie.

12. Fix the receiver with Velcro, connect the cables, and fix the cables with tie. The power wire

shall pass through the hole on the wooden part and be placed on the upper part of the fuselage.

Test whether the servos and motor are working correctly.

13. Fix the vertical tail with stickers.

14. Combine the fuselage.

15. Paste the fuselage sticker.

16. Paste the fuselage sticker.

17. Paste the fuselage sticker.

18. Paste the fuselage sticker.

19. Paste the fuselage sticker.

20. Use the end of a screw driver to score through the half-cut line of the horizontal tail surface.

21. Use the end of a screw driver to score through the half-cut line of the wings.

22. Use the end of a screw driver to score through the half-cut line of the wings.

23. Install the tail.

24. Attach the inner part of the wings to the fuselage.

25. Attach the outer part of the wings.