Millenium star TSP100 Manual de usuario
i
Star TSP100 Receipt Printer
Installation Guide
Version 1.2
Copyright Information
ii
© 2016 Millennium Systems International. All rightsreserved.
Every effort has been made to ensure that the information in this guide is accurate. Millennium Systems
International assumes no responsibility or liability for any errors or inaccuracies with the informational content in
this guide. Millennium Systems International and third-party publishers release updates frequently so the images
shown in this user guide may be slightly different from what you see in your version of the software.
Other company and product names mentioned herein may be trademarks of their respective companies. Mention
of third-party products is for informational purposes only and constitutes neither an endorsement nor a
recommendation. Millennium Systems International assumes no responsibility with regard to the performance or
use of these products. All understandings, agreements, or warranties, if any, take place directly between the
vendors and the prospective users.
The example companies, organizations, products, domain names, email addresses, logos, people, places, and
events depicted herein are fictitious. No association with any real company, organization, product, domain name,
email address, logo, person, place, or event is intended or should be inferred.
Millennium Systems International is not responsible for the content of external Internet sites referenced in
this guide.
Using This Guide
3
This guide explains how to install the Star TSP100 receipt printer for use with Millennium.
4
Contents
Overview .......................................................................................................................................................1
Step 1 - Basic Installation & Configuration ................................................................................................... 2
1.1
- Change Windows Settings.................................................................................................................2
1.2
- Install the Receipt Printer Software................................................................................................14
1.3
- Configure the Receipt Printer Software..........................................................................................30
1.4
- Configure Millennium .....................................................................................................................32
Step 2 - Advanced Configuration ................................................................................................................35
2.1
- Customize Receipts .........................................................................................................................35
2.2
- Connect a Cash Drawer...................................................................................................................38
Step 3 - Terminal Services Configuration....................................................................................................41
3.1
- Configure Server Connection Settings ............................................................................................41
3.2
- Configure Remote Desktop Connection .........................................................................................45
Troubleshooting Guide ...............................................................................................................................47
1
Overview
Note: You must assemble the receipt printer using the manufacturer's instructions before starting the
installation.
Complete the following steps to install the Star TSP100 receipt printer.
Step 1 - Basic Installation & Configuration
The first step is to install and configure the receipt printer to work with Millennium.
1.1
- Change Windows Settings
1.2
- Install the Receipt Printer Software
1.3
- Configure the Receipt Printer Software
1.4
- Configure Millennium
Step 2 - Advanced Configuration
The second step is to customize the appearance of your receipts and/or connect a non-intelligent cash
drawer to the receipt printer.
2.1
- Customize Receipts
2.2
- Connect a Cash Drawer
Step 3 - Terminal Services Configuration
The final step is only applicable if you operate Millennium in a Remote Desktop Services/Terminal
Services environment.
3.1
- Configure Server Connection Settings
3.2
- Configure Remote Desktop Connection
2
Step 1 - Basic Installation & Configuration
Step 1 - Basic Installation & Configuration
1.1 - Change Windows Settings
The first step is to change settings in Windows.
Note: If you are installing the receipt printer on a Mac, you need to complete this step in the Windows
operating system.
Windows XP
Important: You do not need to change any settings in Windows XP. Refer to page 14 to proceed with
the next step of the installation.
Windows Vista
1.
Access Windows with an administrator account.
2.
Press Windows Logo+R or select Start > All Programs > Accessories >Run.
The Run window displays.
3.
Type "sysdm.cpl" and press Enter.
The System Properties window displays.
4.
Click the Advanced tab.
5.
Click Settings in the Performance section.
The Performance Options window displays.
6.
Click the Data Execution Prevention tab.
3
Step 1 - Basic Installation & Configuration
7.
Select Turn on DEP for essential Windows programs and servicesonly.
8.
Click OK until the System Properties window closes.
9.
Right-click on the Windows desktop and selectPersonalize.
The Personalization screen displays.
10.
Type "uac" in the Search field.
A list of search results displays.
11.
Click Turn User Account Control (UAC) on or off.
The Turn User Account Control On or Off screen displays.
12.
Deselect Use User Account Control (UAC) to help protect yourcomputer.
13.
Click OK.
14.
Click Restart Now.
15.
Refer to page 14 to proceed with the next step of the installation.
4
Step 1 - Basic Installation & Configuration
Windows 7
1.
Access Windows with an administrator account.
2.
Click Start, type "sysdm.cpl", and press Enter.
The System Properties window displays.
3.
Click the Advanced tab.
4.
Click Settings in the Performance section.
The Performance Options window displays.
5.
Click the Data Execution Prevention tab.
6.
Select Turn on DEP for essential Windows programs and servicesonly.
7.
Click OK until the System Properties window closes.
5
Step 1 - Basic Installation & Configuration
8.
Click Start, type "uac", and press Enter.
The User Account Control Settings window displays.
9.
Move the slider to Never notify.
10.
Click OK.
11.
Restart the computer.
12.
Refer to page 14 to proceed with the next step of the installation.
6
Step 1 - Basic Installation & Configuration
Windows 8
1.
Access Windows with an administrator account.
2.
On the Start screen, type "sysdm.cpl" and pressEnter.
The System Properties window displays.
3.
Click the Advanced tab.
4.
Click Settings in the Performance section.
The Performance Options window displays.
5.
Click the Data Execution Prevention tab.
Tabla de contenidos
