MikroTik RB750Gr3 Manual de usuario

hEX

hEX is a powerful five port Gigabit Ethernet router for locations where wireless connectivity is not required.

First use

1. Choose your powering solution, please see Powering section for possibilities.

2. Connect your nternet cable to port 1 (labeled “ nternet”), and local network computers to ports 2-5.

3. Connect your direct input power jack if not using POE, to start up the device.

4. f using POE please see section POE Adapter on how to connect.

5. The device will boot up and after short beep, the network will be available for connecting.

6. Set your computer P configuration to automatic (DHCP).

7. Once connected to the network, open http://192.168.88.1 in your web browser to start configuration, since

there is no password by default, you will be logged in automatically.

8. We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest

version to ensure the best performance and stability.

9. Set up your password in the screen that loads.

Mounting

This device is designed for use indoors by placing it on the flat surface or mounting on the wall, mounting points are

shown on the picture below, screws are not included in the package. Screws with size 4x25 mm fit nicely,

depending on your wall structure you can use dowels 6x30 mm and 6 mm drill bit if needed.

When mounting on the wall, please ensure that cable feed is pointing downwards. We recommend using Cat6

cable for our devices. The P rating scale for this device is PX0.

See mikrotik.com/products for the latest version of this document. Document #49563 Modified on: 01.OKT.2019

Powering

The device accepts power from the power jack or from the first Ethernet port (Passive PoE):

•Direct input power jack (5.5mm outside and 2mm inside, female, pin positive) accepts 8-30 V ⎓DC.

•The first Ethernet port accepts passive Power over Ethernet 8-30 V ⎓DC. 12 V or more is recommended to

compensate for the loss in cables.

The power consumption of this device under maximum load with attachments is 10 W. Without attachments 5 W.

Booting process

RouterOS includes many configuration options in addition to what is described in this document. We suggest

starting here to get yourself accustomed to the possibilities: http://mt.lv/help. n case P connection is not available,

the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side

(all access is blocked from the nternet port by default).

For recovery purposes, it is possible to boot the device from the network, see a section Reset button .

Extension Slots and Ports

•The device has five individual Ethernet ports, supporting automatic cross/straight cable correction (Auto

MD /X), so you can use either straight or cross-over cables for connecting to other network devices.

•MicroSD card slot.

•USB type A slot.

Buttons and jumpers

Reset button

The RouterBOOT reset button has the following functions. Press the button and apply the power, then:

•Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.

•Release the button when the LED turns solid green to clear all configuration and bridge all interfaces.

•Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers

(required for reinstalling RouterOS over the network).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed

before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Mode button

The action of the mode buttons can be configured from RouterOS software to execute any user-supplied RouterOS

script. You can also disable this button.

The mode button can be configured in RouterOS menu /system routerboard mode-button

Connecting to a POE dapter:

1. Connect the Ethernet cable from the device to the POE port of the POE adapter.

2. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data

and power flow.

3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.

See mikrotik.com/products for the latest version of this document. Document #49563 Modified on: 01.OKT.2019

ccessories

Package includes the following accessories that come with the device:

•DC EU/US Switching Power Supply 24 V, 0.38 A, 9 W, Level V , cable:1.5 m.⎓

Specifications

For more information about this product, specification and pictures please visit our web page:

https://mikrotik.com/product/RB750Gr3

Operating System Support

The device supports RouterOS software version 6. The specific factory installed version number is indicated in the

RouterOS menu /system resource. Other operating systems have not been tested.

See mikrotik.com/products for the latest version of this document. Document #49563 Modified on: 01.OKT.2019

Tabla de contenidos

Otros manuales de Enrutador de red de MikroTik

MikroTik

MikroTik 750/GL Manual de usuario

MikroTik

MikroTik GPEN21 Manual de usuario

MikroTik

MikroTik RBSXTR&R11e-LTE6 Manual de usuario

MikroTik

MikroTik RouterBOARD Groove Manual de usuario

MikroTik

MikroTik RouterBoard 1200 Hoja de especificaciones

MikroTik

MikroTik RouterBOARD 951-2n Manual de usuario

MikroTik

MikroTik hEX lite Manual de usuario

MikroTik

MikroTik OmniTik U-5HnD Manual de usuario

MikroTik

MikroTik hAP lite Manual de usuario

MikroTik

MikroTik CCR1036-12G-4S Manual de usuario

MikroTik

MikroTik CCR1009-8G-1S-1S+ Manual de instrucciones

MikroTik

MikroTik CCR2004-16G-2S+ Manual de usuario

MikroTik

MikroTik CSS610-8G-2S+IN Manual de usuario

MikroTik

MikroTik LHG G-60ad Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

MikroTik

MikroTik hEX Manual de usuario

MikroTik

MikroTik MANTBox 52 15s Manual de usuario

MikroTik

MikroTik CRS354-48P-4S+2Q+RM Manual de usuario

MikroTik

MikroTik RB960PGS Manual de usuario

MikroTik

MikroTik RB4011iGS+5HacQ2HnD-IN Manual de usuario

MikroTik

MikroTik RouterBOARD 750UP Manual de usuario

MikroTik

MikroTik RB912UAG-2HPnD Manual de usuario

MikroTik

MikroTik RB912UAG-2HPnD Manual de usuario

MikroTik

MikroTik RB911G-2HPnD-12S Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario