Connect directly to outlet. Do not use product with extension cord. The use of an extension
cord could override the GFCI built into the plug of the power supply cord resulting in the risk of
electrical shock.
8. Always wear safety glasses or goggles when operating or performing maintenance.
9. Always move switch on product to “Off” position before connecting or disconnecting cord to electrical
outlets.
10.Always turn water supply on before turning pressure washer on unless draining for storage.
Running pump dry causes serious damage.
11.Always hold trigger handle and wand firmly when starting and operating the product.
12.Always follow detergent manufacturer’s label recommendations for proper use of detergents. Always
protect eyes, skin and respiratory system from detergent if used.
13.Always lock the trigger of the trigger handle in the safety position when not in use.
14.Do not use pressure that exceeds the operating pressure of any of the parts (hoses, fittings, etc.) in
the pressurized system. Never use with any other manufacturer’s accessories or components.
15.Do not spray electrical apparatus and wiring or the product itself.
16.Do not operate the pressure washer with the inlet water filter removed. Keep filter clear of debris and
sediment.
17.Discharge residual pressure by depressing the trigger until no more water comes out of the nozzle.
18.Keep clear of nozzle. Never direct high-pressure spray at any person, animal or self.
19.To minimize the amount of water getting into the pressure washer, the product should be placed as
far as possible from the cleaning site during operation.
This pressure washer is provided with a Ground Fault Circuit Interrupter (GFCI) built into the power
supply cord. This device provides additional protection from the risk of electrical shock. Should
replacement of the plug or cord become necessary, use only manufacturer replacement parts that
include GFCI protection. All services must be done by an Authorized Service Technician. Unauthorized
service will void warranty. See Page 4 for testing procedure.
In a double-insulation product, two systems of insulation are provided instead of grounding.
No grounding is provided on a double-insulated product, nor should a means for grounding
be added to the product.
Servicing a double-insulated product requires extreme care and knowledge of the system,
and should be done only by Authorized Service Technician. Replacement parts of a
double-insulated product must be manufacturer replacement parts. A double-insulated
product is marked with the words “DOUBLE-INSULATION” or “DOUBLE-INSULATED”.
The symbol “ ” may also be marked on the product.
WARNING
IMPORTANT SAFETY INSTRUCTIONS
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
DOUBLE-INSULATION INSTRUCTION
SAVE THESE INSTRUCTIONS
English 3
