Midea MCS2045BS Manual de usuario
INSTRUCTION MANUAL
Vacuum Cleaner
MCS2045BS
PLEASE READ THE
MANUAL CAREFULLY
BEFORE USING AND
KEEP IT PROPERLY
FOR FUTURE USE
Warning notices: Before
using this product, please
read this manual carefullly
and keep it for future
reference.
The design and
specifications are subject to
change without prior notice
for product improvement.
Consult with your dealer or
manufacturer for details.
EN
2
IMPORTANT SAFETY INSTRUCTIONS
This section contains safety instructions that will help protect from risk of
personal injury or property damage. Failure to follow these instructions
invalidates the given warranty.
• This appliance complies with international safety standards.
• Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• If the adapter or the appliance itself is damaged, do not use it. Contact an
authorised service centre.
• Prevent damage to the power cable by not squeezing, bending, or rubbing it
on sharp edges.
• Do not touch the appliance or its plug when it is plugged if your hands are
damp or wet.
• Do not pull the power cable when unplugging the appliance.
• Do not vacuum flammable materials and when vacuuming cigarette ash,
make sure that it has cooled down.
• Do not vacuum water or other liquids.
• Protect the appliance from rain, humidity and heat sources.
• Never use the appliance in or near places where combustible or flammable
environments are present.
• Unplug the appliance before cleaning and maintenance.
• Do not immerse the appliance in water for cleaning.
• Do not attempt to dismantle the appliance.
• Use the original parts or parts recommended by the manufacturer only.
• Do not attempt tovacuum particles such as cement, plaster and compressed
paper in order to prevent the filter from being clogged and the motor being
damaged.
• If the adapter is damaged, it must be replaced by the manufacturer or its
agent or similarly qualified person in order to avoid hazard.
3
IMPORTANT SAFETY INSTRUCTIONS
• Use the appliance only with the power adapter supplied.
• Do not use the appliance without filters fitted, otherwise it can get damaged.
• If you keep the packaging materials, store them out of the reach of children.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
• The appliance is only to be used with the power supply unit provided with
the appliance.
• The adapter must be removed from the socket-outlet and the battery pack
must be removed from the appliance before cleaning or maintaining the
appliance
• Keep fingers, hair and loose clothing from moving parts and openings whilst
using the vacuum cleaner.
• The battery must be removed from the appliance before it is scrapped;
• Please dispose of used batteries according to local laws and regulations.
• This appliance contains batteries that are only replaceable by skilled
persons.
• The supply terminals are not to be short-circuited.
4
Assembly and other parts instruction
Body
PowerCord
Slide
switch
Tube
Nozzle
Accessories list:
Instruction
Manual
Tips:
When cleaning the high places, please assemble the accessories on tube or
body.
5
Operation 1:
Cleaning:
Note:
To avoid the air flue being blocked, please clean the big particle waste. (such as
paper, cloth and others)
Before connect to power, Be sure the slide switch is closed.
No. Operation instruction
1 Conect the power to AC 220~240V power socket
2 Push forward ” Slide switch” to start
3 Pull backward “Slide switch” to stop
Slide
switch
PowerCord
6
Operation 2
Wall–hung assembly and usage:
1. Wall–hung assembly
When not using the cleaner, please store the cleaner on wall.
2. Choose the wall-hung assembly location
Fixed
point
>10cm
105cm-125cm
3. Fixed the M3/M4/M5/M6 screw to the fixed point, and be sure the
distance between surface of screw and wall surface is bigger than
3mm.
4. Store the cleaner on wall
7
Operation 3
Clean and maintain cleaner
Dust cup disassembly and clean
Tips:
To keep the suction power of cleaner, please clean the dust in it regularly.
1. Knob down the dust cup release button, take down the cup
Push
Max
Line
2. Take out the cyclone from dust cup and release dust
8
3. Disassemble cyclone and clean, all parts are washable.
4. After airing all parts completely, assemble them according to disassembly
steps.
9
Operation 4
Clean and maintain nozzle
Note:
1. To avoid affect the normal operation of nozzle, when wheels are dusty,
please clean and maintain them.
2. When disassemble and main brush, please make sure it’s not working.
3. Push button and take off the nozzle.
Push
Tips:
Don’t suggest to wash the nozzle.
If the wheels were tangled by hair, please use scissor or knife to clean.
10
Tabla de contenidos
Otros manuales de Aspiradora de Midea
Midea
Midea VCW40 Manual de usuario
Midea
Midea MVC-S8+ Manual de usuario
Midea
Midea VTW21A15T Manual de usuario
Midea
Midea C7 Manual de usuario
Midea
Midea VCL10 Manual de usuario
Midea
Midea C5 Guía del administrador
Midea
Midea MVC-12M-GR Manual de usuario
Midea
Midea M7 Manual de usuario
Midea
Midea P71 Guía del administrador
Midea
Midea VCP6P Manual de usuario
Midea
Midea B5 Guía del administrador
Midea
Midea Eureka i5 Manual de usuario
Midea
Midea M7 Manual de usuario
Midea
Midea V20U01ADS2NA Manual de usuario
Midea
Midea MSB 5.700bs Guía del administrador
Midea
Midea VCB42A3670G Manual de usuario
Midea
Midea Eureka I5C Manual de usuario
Midea
Midea P12 FLEX Manual de usuario
Midea
Midea C5 PRO Guía del administrador
Midea
Midea C3 VC1707 Guía del administrador
