Microscan Visionscape GigE Manual de usuario

Getting Started with

Visionscape®

GigE Cameras

84-111015-02 Rev C

v6.0.3, June 2013

Microscan Systems, Inc.

Tel: +1.425.226.5700 / 800.762.1149

Fax: +1.425.226.8250

ISO 9001 Certified

Issued by TüV USA

allowing customers to operate and/or service Microscan manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Microscan.

Throughout this manual, trademarked names might be used. We state herein that we are using the names to the

benefit of the trademark owner, with no intention of infringement.

Disclaimer

The information and specifications described in this manual are subject to change without notice.

Latest Manual Version

For the latest version of this manual, see the Download Center on our web site at:

www.microscan.com.

Technical Support

For technical support, e-mail: help[email protected].

Warranty

For current warranty information, see: www.microscan.com/warranty.

Microscan Systems, Inc.

United States Corporate Headquarters

+1.425.226.5700 / 800.762.1149

United States Northeast Technology Center

+1.603.598.8400 / 800.468.9503

European Headquarters

+31.172.423360

Asia Pacific Headquarters

+65.6846.1214

Getting Started with Visionscape GigE Cameras iii

Contents

PREFACE Welcome! vii

Purpose of This Guide vii

Conventions vii

CHAPTER 1 Before You Begin 1-1

Visionscape Hardware 1-1

Package Contents 1-3

Components 1-3

PC Requirements 1-4

CHAPTER 2 Setting Up the GigE Camera 2-1

Install Visionscape Software 2-2

Plug In Your USB License Key 2-3

Configure Gigabit Ethernet Adapter(s) In Your PC to Use Static

IP 2-4

Open the “Network Connections” window 2-4

Configure Network Properties 2-6

Connect Cables to Your GigE Camera(s) 2-8

Connect the GigE Camera(s) to Your PC 2-9

Contents

ivGetting Started with Visionscape GigE Cameras

Take Your First Picture 2-10

Start FrontRunner 2-10

Select the GigE System 2-11

Create a New Job for Your GigE System 2-12

Take a Picture 2-13

Change the Selected Camera 2-14

General Location Considerations 2-16

Environmental Requirements 2-17

CHAPTER 3 Advanced Tool Tutorials 3-1

Tutorial 1 — Defect Detection with Flaw Tool 3-2

Tutorial 2 — OCV Fontless Tool 3-13

Tutorial 3 — Data Matrix Tool 3-22

Tutorial 4 — Using Measurement Tools in an Inspection 3-29

Tutorial 5 — Using the Trajectory Step 3-43

APPENDIX A GigE Network Configuration A-1

Configuring Your Network Adapter for GigE Visionscape A-2

How to Modify the dm.config File to Change Camera and System

Assignments A-16

Visionscape GigE Network Configuration A-41

Getting Started with Visionscape GigE Cameras vii

Preface

PREFACE Welcome!

Purpose of This Guide

This guide is designed to get your Visionscape®GigE Camera up and

running quickly.

The following topics are covered in this guide:

• Instructions on how to set up and connect Visionscape® GigE

Camera(s) to a network.

• Instructions on how to install Visionscape® software for use with your

Visionscape® GigE Camera in a Windows XP/Vista/7-equipped PC.

Conventions

The following typographical conventions are used throughout this guide:

• Items emphasizing important information are bolded.

• Menu selections, menu items and entries in screen images are

indicated as: Run (triggered), Modify..., etc.

Preface

viii Getting Started with Visionscape GigE Cameras

Getting Started with Visionscape GigE Cameras 1-1

Before You Begin

CHAPTER 1 Before You Begin

Before you connect and set up the Visionscape®GigE Camera(s), be

sure you have all of the necessary components. This section helps you

prepare for a successful installation. Chapter 2, Setting Up the GigE

Camera, describes the actual installation process.

Visionscape®Hardware

Visionscape® can run with several types of devices:

Visionscape®GigE Cameras — These are imaging devices that

connect to the PC via a Gigabit Ethernet connection. All vision processing

is performed on the PC.

Visionscape®Software System — Visionscape® can mimic a hardware

system by software emulation. The software system may be used for

application development using stored images and allows full operation for

a limited duration without a software key.

Figure 1–1 shows supported Visionscape® hardware. All smart cameras

and Visionscape® GigE Cameras are supported by the same application

environment.

Chapter 1Before You Begin

1-2 Getting Started with Visionscape GigE Cameras

FIGURE 1–1. Visionscape®GigE Camera

Package Contents

Unpack your components and check them against the System

Configuration Sheet. If any item is missing or damaged, contact your

Microscan distributor.

Important: Keep the system configuration sheet. You will need to refer to

the part numbers and descriptions during system installation. After the

installation, keep the system configuration sheet for future reference.

Visionscape® GigE Camera

Components

Before You Begin

Getting Started with Visionscape GigE Cameras 1-3

Components

In addition to your Vision System, you may need the following items,

which can be ordered directly from Microscan:

• Lenses

• Lighting Components

• Strobe/Trigger, Power, and Network Cables

• Network Components such as Switches and NIC (Network) Cards

• PCIe I/O Kits

Chapter 1Before You Begin

1-4 Getting Started with Visionscape GigE Cameras

PC Requirements

The Minimum requirements for a PC running Visionscape® are as follows:

Supported Operating Systems:

• Microsoft Windows XP Professional (32-bit)

• Microsoft Windows Vista (32-bit)

• Microsoft Windows 7 (32-bit and 64-bit)

Hardware Specs:

• Minimum of 1GB memory for Windows XP

• Minimum of 2GB memory for Windows Vista and 7

• 1 Gigabit Ethernet port reserved for use with Visionscape® GigE

Cameras

• If I/O is required: one open PCIe slot for the available Digital I/O

board

Tabla de contenidos

Otros manuales de Cámara digital de Microscan

Microscan

Microscan Vision MINI Manual de usuario

Microscan

Microscan Visionscape HE1600T Manual de usuario

Microscan

Microscan HawkEye 1600T Manual de usuario

Microscan

Microscan MicroHAWK MV-20 Manual de usuario

Microscan

Microscan Visionscape HE1600T Manual de usuario

Microscan

Microscan HawkEye 1500 Series Manual de instalación y operación

Microscan

Microscan HAWK MV-4000 Manual de usuario

Microscan

Microscan Vision MINI Xi Smart Camera Manual de usuario

Microscan

Microscan Vision HAWK GMV-6800-1000G Manual de usuario

Microscan

Microscan MicroHAWK MV-20 Manual de usuario

Microscan

Microscan VS-1 Manual de usuario

Microscan

Microscan Vision Hawk Smart Camera Manual de usuario

Microscan

Microscan Visionscape CMGC03 Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario