MICRO-EPSILON InertialSENSOR INC5701 Manual de usuario

Pin Assignment

Connect the open cable end in accordance with

the color coding.

Pin 1Color 2Description

45 °

Fig. 4 View of

solder pin side,

8-pin, A-coded,

female

connector

1 White Voltage output (angle)

2 Brown GND (current output)

3 Green Current output (angle)

4 Yellow RS485+

5 Gray GND

(signal voltage output)

6Black/

pink GND (Supply)

7 Blue RS485-

8 Red Supply+ 3

1) - SA - Connector

2) PCx/8-M12 Power supply and output cable, see

operating instructions, Chap. A 1.

3) 5 - 32 VDC

MICRO-EPSILON MESSTECHNIK GmbH & Co. KG

Königbacher Straße 15

94496 Ortenburg / Germany

Tel. +49 (0) 8542 / 168-0 / Fax +49 (0)8542 / 168-90

e-mail [email protected]

www.micro-epsilon.com

X9771391-A011089HDR

Current and Voltage Output

The sensor makes the angular value available as ana-

log output variable either as current or voltage value on

separate pins, depending on the configuration of the

sensor using the software tool of Micro-Epsilon.

Further Information

For further information about the system read the

operating instructions. You will find this online at:

www.micro-epsilon.de/download/manuals/

man--inertialSENSOR-INC5701--en.pdf.

Decommissioning, Disposal

Remove the power and output cable from the

sensor.

Incorrect disposal may cause harm to the environment.

Dispose of the device, its components and ac-

cessories, as well as the packaging materials in

compliance with the applicable country-specific

waste treatment and disposal regulations of the

region of use.

Assembly Instructions

inertialSENSOR

INC5701

Warnings

Connect the power supply and the display/output

device according to the safety regulations for electrical

equipment.

> Risk of injury

> Damage to or destruction of the sensor

The supply voltage must not exceed the specified limits.

> Damage to or destruction of the sensor

No sharp or heavy objects should be allowed to affect

the cables. Avoid folding the cables. Do not bend more

tightly than the minimum bending radius of the cables.

> Damage or destruction of the cable, failure of the

measuring device

Do not crush the cable. Protect the sensor cable against

damage.

> Damage or destruction of the cable, failure of the

measuring device, data loss

Ensure that the coupling nuts of the connectors are

firmly tightened.

> Damage or destruction of the cable, failure of the

measuring device

Notes on the CE Marking

The following apply to the inertialSENSOR INC5701:

EU Directive 2014/30/EU

EU Directive 2011/65/EU

The sensor fulfills the specification of the EMC require-

ments, if the instructions in the operating instructions

are followed.

Proper Environment

- Protection class: 1IP 67

- Operating temperature: -40 ... +85 °C (-40 ... 185 °F)

- Storage temperature: -40 ... +85 °C (-40 ... +185 °F)

- Ambient pressure: Atmospheric pressure

1) With M12 connector

Installation and Assembly

For cable assembly, please observe the Chapter

Warnings.

The sensor is fixed with two M4 screws. After the sen-

sor has been attached to the component, the position

of rest (angular value = 0°) is freely adjustable with the

software tool of Micro Epsilon.

From the position of rest the sensor measures an angle

of up to 180 ° in each direction of rotation (clockwise

and counterclockwise). The measurement range is

shown in Figure below, see Fig. 1.

To ensure most precise measurement the sensor

should be positioned without tilting as shown,

see Fig. 2.

Fig. 1 Measurement range ±180 °

Fig. 2 Standard mounting position with most precise

measurement without tilting of the sensor

12 (.47)

53 (2.09)

5.5 (.22)

12 (.47) 76 (2.99)

12.5 (.49)

6 (.24)

24 (.94)

26.5 (1.04)

Mounting holes

for M4 screws

Fig. 3 Dimensional drawing, dimensions in mm

(inches), not to scale

Otros manuales de Accesorios de MICRO-EPSILON

MICRO-EPSILON

MICRO-EPSILON surfaceCONTROL SC2500 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON induSENSOR DTD Manual de usuario

MICRO-EPSILON

MICRO-EPSILON optoNCDT 2300 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON colorSENSOR CFO Manual de usuario

MICRO-EPSILON

MICRO-EPSILON colorSENSOR-LT-1-ST Manual de usuario

MICRO-EPSILON

MICRO-EPSILON colorSENSOR OT Series Manual de usuario

MICRO-EPSILON

MICRO-EPSILON induSENSOR EDS Series Manual de usuario

MICRO-EPSILON

MICRO-EPSILON ILD1700 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON optoNCDT ILR2250 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON WireSensor Series Manual de usuario

MICRO-EPSILON

MICRO-EPSILON EDS Series Manual de usuario

MICRO-EPSILON

MICRO-EPSILON optoCONTROL CLS-K-10 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON colorSENSOR LT-1-ST Manual de usuario

MICRO-EPSILON

MICRO-EPSILON optoNCDT 1220 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON thermoMETER CT Series Manual de usuario

MICRO-EPSILON

MICRO-EPSILON scanCONTROL 2900 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON optoNCDT ILR 102 series Manual de usuario

MICRO-EPSILON

MICRO-EPSILON induSENSOR MSC 7210 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON thermoMETER CTVideo Manual de usuario

MICRO-EPSILON

MICRO-EPSILON capaNCDT 6500 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON surfaceCONTROL 2500 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON optoNCDT 1750 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON capaNCDT 6110 Manual de usuario

MICRO-EPSILON

MICRO-EPSILON WPS-2300-MK88-M Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

MICRO-EPSILON inertialSENSOR INC5701 Manual de usuario

Manuales populares de Accesorios de otras marcas