Metrologic Stratos MS2xxx Series Instrucciones de instalación y funcionamiento

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Lector de código de barras de Metrologic

Metrologic

Metrologic Fusion MS3780 Manual de usuario

Metrologic

Metrologic MS7600 Manual de usuario

Metrologic

Metrologic IS4220 ScanGlove Manual de usuario

Metrologic

Metrologic MK3780-31A62 Manual de usuario

Metrologic

Metrologic MS6130 Manual de usuario

Metrologic

Metrologic IS1000 Series Manual de usuario

Metrologic

Metrologic MS7120 Orbit Manual de usuario

Metrologic

Metrologic MS5100 Eclipse Series Manual de usuario

Metrologic

Metrologic FocusE IS1650 Manual de usuario

Metrologic

Metrologic Genesis MS7580 Manual del propietario

Metrologic

Metrologic MK5145-31A38 Manual de usuario

Metrologic

Metrologic MS6130 Manual de usuario

Metrologic

Metrologic MS9520 Voyager Manual de usuario

Metrologic

Metrologic IS421X ScanGlove Manual de usuario

Metrologic

Metrologic IS4320-41 ScanKey Manual de usuario

Metrologic

Metrologic MS9500 Voyager Series Manual de usuario

Metrologic

Metrologic MS9530 Series Manual de usuario

Metrologic

Metrologic Genesis MS7580 Manual de usuario

Metrologic

Metrologic MS863 Manual de usuario

Metrologic

Metrologic MS2020 Stratos Manual de usuario

Metrologic

Metrologic MS9530 Series Manual de usuario

Metrologic

Metrologic 1070 Manual de usuario

Metrologic

Metrologic MS9590 VOYAGERGS series Manual de usuario

Metrologic

Metrologic MS 1690 Focus Series Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario

METROLOGIC INSTRUMENTS, INC.

MS2xxx Stratos®Series

Configuration Addendum

Copyright

© 2008 by Metrologic Instruments, Inc. All rights reserved. No part of this

work may be reproduced, transmitted, or stored in any form or by any means

without prior written consent, except by reviewer, who may quote brief

passages in a review, or provided for in the Copyright Act of 1976.

Trademarks

Metrologic is a registered trademark of Metrologic Instruments, Inc.

Products identified in this document are hereby acknowledged as

trademarks, registered or otherwise, of Metrologic Instruments, Inc. or their

respective companies.

ii

TABLE OF CONTENTS

Important Notes - Before You Start ...................................................................... 1

Scale Program Mode............................................................................................ 2

Scale/Load Cell Configuration Bar Codes

Single or Dual Cable Scale Configuration Bar Codes

Unit Configuration (Pounds or Kilograms).............................................. 5

Pole Display Configuration..................................................................... 6

Scale Settling Filter Configuration .......................................................... 7

Scroll Weight Configuration.................................................................... 9

Dual Cable Scale Configuration Bar Codes

Price Computing Configuration ............................................................ 10

Scale Protocols .................................................................................... 11

Scale COM Port Settings (Baud Rate) ................................................. 14

Scale COM Port Settings (Data Bits & Parity)...................................... 16

Single Cable Scale Configuration Bar Codes

Set Scale for Single Cable Communication ......................................... 19

Scanner Configuration Bar Codes

Dual Cable Scanner Configuration Bar Codes

Dual Cable Scanner Mode ................................................................... 20

Dual Cable Scanner OPOS Mode........................................................ 20

Various Dual Cable Scanner Mode ...................................................... 21

IBM 3rd Generation 46xx ...................................................................... 22

IBM OEM Full Speed USB ................................................................... 22

Single Cable Scanner Protocols for P.O.S. Compatibility

MSS Global.......................................................................................... 23

ISS45 ................................................................................................... 24

OPOS................................................................................................... 25

Retailix / NCR....................................................................................... 26

Retailix / OPOS .................................................................................... 27

IT Retail................................................................................................ 28

iii

TABLE OF CONTENTS

IBM Self Checkout System .................................................................. 29

Various RS232 Single Cable Codes .................................................... 30

IBM 3rd Generation 46xx ...................................................................... 31

IBM OEM Full Speed USB ................................................................... 32

Additional POS Data Formatting

Full Speed USB Table Top/Handheld .................................................. 33

Special Function ACK .......................................................................... 35

Prefix/Suffix.......................................................................................... 36

3x-30 Acknowledge Responses ........................................................... 37

Special Function Command Responses .............................................. 38

BCC in POS communications .............................................................. 42

3 Scale Status Bytes ............................................................................ 43

Scale Options....................................................................................... 44

Remote Display.................................................................................... 45

StratosSTATS ...................................................................................... 46

Additional POS Related Functions

Scanner Beep on Weight Sent............................................................. 49

Restrict In-Store Codes........................................................................ 50

Scale Shadow Mode ............................................................................ 51

Scanner Razz on Not-On-File .............................................................. 52

Additional Scanner Configuration Bar Codes

Horizontal Depth of Field...................................................................... 53

Vertical Depth of Field.......................................................................... 55

Auxiliary Port

Stratos School...................................................................................... 57

Quick Start for a Secondary Metrologic Scanner ................................. 58

EAS Bar Codes

EAS Device Types ............................................................................... 60

EAS Timeout ........................................................................................ 63

EAS Connection................................................................................... 68

iv

TABLE OF CONTENTS

Continuous Mode ................................................................................. 71

EAS Deactivation ................................................................................. 72

Sensormatic ScanMax Pro................................................................... 75

Scanner Test Bar Codes

Supplemental Tests..................................................................................... 77

Display Software Numbers................................................................... 77

Contact Information and Office Locations........................................................... 78

1

IMPORTANT NOTES -BEFORE YOU START

It is important to carefully read the notes marked with a symbol on the pages

contained in this manual. Not all configuration codes are designed to be used for

both a single and dual cable scanner/scale system. Many of the configuration

bar codes require additional steps before the unit can be configured and placed

into service. Most of the bar codes in this addendum were designed to be used

with a Stratos model that includes a scale. The text marked with a symbol will

provide important additional information about the restrictions and uses of the bar

codes shown.

All of the bar codes in this manual require:

•The scanner/scale to have a firmware number of 14996 or higher

•All configuration bar codes must be scanned with the vertical window

The bar codes (starting with 996) located on pages 5 - 19 also

require the scanner/scale to:

•Be in scale program mode (see page 2)

•Be calibrated, sealed and certified by local Weights and Measures

authorities after the scale configuration process has been completed.

The scanner/scale can not be placed in service until it is sealed and

certified by the proper authorities.

For further details on calibration procedures for Weights and Measures

certification, refer to the Scale Operation: Calibration section of the

Stratos Installation and User’s Guide.

The certification of the weighing mechanism of the scale version of

this scanner is subject to federal, state and local Weights and

Measures statutes and regulations and can only be performed by

authorized government agencies and/or their duly registered

agents. Each time the scale or weighing mechanism is calibrated,

it should be properly sealed with a paper seal or a wire seal prior to

being placed into service in commerce.

It is the responsibility of the owner of the scale to confirm

compliance with the relevant Weights and Measures statutes and

regulations applicable in your area by checking with the appropriate

government agency before placing a newly calibrated unit into

service or removing any official seals.

2

SCALE PROGRAM MODE

The following steps are only required for the scale configuration bar

codes located on pages 5 - 19 (bar codes beginning with 996.)

1. Power down the scanner/scale.

Then, temporarily remove the

scale platter and place it in a safe

location.

Figure 1.

2. Cut and remove the security seal over the program/calibration switch cover.

See Figure 2 below for seal location on the StratosE and the StratosH

models. See Figure 3 on page 3 for the seal location on the StratosS.

Once the security seal is cut the unit cannot be place in service until

it is calibrated, sealed and certified by local Weights and Measures

authority.

3. Remove the M3 screw securing the switch cover in place. Store the cover

and screw in a safe location. They will be needed again after the scale is

configured and calibrated.

Always follow all Electro-Static Discharge (ESD) procedures when

exposing the internal scanner/scale components.

4. Enter the scale program mode by sliding the switch to the program

position. See Figure 2 below for the switch location on the StratosE and

StratosH. See Figure 3 on page 3 for the switch location on the StratosS.

Figure 2. StratosE and StratosH Calibration Seal and Switch Location

3

SCALE PROGRAM MODE

Figure 3. StratosS Calibration Seal and Switch Location

5. Disconnect the scale-to-host RS232 cable from the unit (dual cable

interface only.)

Figure 4. Disconnect scale-to-host RS232 Cable

6. Reinstall the platter and connect AC power to the scanner.

Check the AC input requirements of the power supply to make sure the voltage matches

the AC outlet. The outlet should be located near the equipment and be easily

accessible.

Metrologic recommends using a switched AC outlet. The switch should be located on

the operator’s side of the checkout counter in close proximity to the scanner/scale to

facilitate calibration and service of the unit.

To maintain compliance with applicable standards, all circuits connected to the scanner

must meet the requirements for SELV (Safety Extra Low Voltage) according to EN/IEC

60950-1.

To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1 and norm

EN/IEC 60950-1, the power source should meet applicable performance requirements

for a limited power source.

4

SCALE PROGRAM MODE

7. If the system is equipped with a remote scale display, it will read H - - -.

8. Use the vertical window to scan the desired scale configuration bar

codes, located on pages 5 - 19.

Figure 5.

9. Reconnect the scale-to-host RS232 cable to the scanner (dual cable

interface only.)

Figure 6.

10. The scale must now be calibrated, tested and certified by local Weights

and Measures authorities before it can be placed in service.

For further details on calibration procedures for Weights and Measures

certification, refer to the Scale Operation: Calibration section of the Stratos

Installation and User’s Guide.

The certification of the weighing mechanism of the scale version of

this scanner is subject to federal, state and local Weights and

Measures statutes and regulations and can only be performed by

authorized government agencies and/or their duly registered agents.

Each time the scale or weighing mechanism is calibrated, it should

be properly sealed with a paper seal or a wire seal prior to being

placed into service in commerce.

It is the responsibility of the owner of the scale to confirm compliance

with the relevant Weights and Measures statutes and regulations

applicable in your area by checking with the appropriate government

agency before placing a newly calibrated unit into service or

removing any official seals.

Type of seal to be used will depend on the guidelines specified by

the local Weights and Measures authorities.

5

SCALE/LOAD CELL CONFIGURATION BAR CODES

Single or Dual Cable Scale Configuration Bar Codes

Unit Configuration (Pounds or Kilograms)

The following bar codes can be used to configure a Single or

Dual Cable MS2xx0.

The MS2xx0 must be in scale program mode to use these bar codes.

Scale = Pounds

³996001

Set the scale measuring range from

0.00 to 30.00 pounds.

Scale =Kilograms

³996002

Set the scale measuring range from

0.000 to 15.000 kilograms.