Metrologic MetroSelect Manual de usuario
METROLOGIC INSTRUMENTS, INC.
MetroSelect®Configuration Guide
Book 1 of 2
Locations ii
LOCATIONS
CORPORATE HEADQUARTERS
North America Metrologic Instruments, Inc. Customer Service: 1-800-ID-METRO
90 Coles Road Tel: 856-228-8100
Blackwood, NJ 08012-4683 Fax: 856-228-6673
Email: [email protected]
Internet: www.metrologic.com
EUROPEAN HEADQUARTERS
Germany, Metrologic Instruments GmbH Tel: +49 89 89019 0
Middle East and Africa Dornierstrasse 2 Fax: +49 89 89019 200
82178 Puchheim b. Email: info@europe.metrologic.com
Spain Metrologic Eria lbérica SL Tel: +34 913 272 400
Julián Camarillo 29, D-1 Fax: +34 913 273 829
28037 Madrid
Italy Metrologic Instruments Italia srl Tel: +39 0 51 6511978
Via Emilia 70 Fax: +39 0 51 6521337
France Metrologic Eria France SA Tel: +33 (0) 1 48.63.78.78
69 Rue de la Belle Etoile Fax: +33 (0) 1 48.63.24.94
95947 – ROISSY CDG CEDEX
United Kingdom Metrologic Instruments UK Limited Tel: +44 (0) 1256 365900
58 Tempus Business Centre Fax: +44 (0) 1256 365955
Kingsclere Road, Basingstoke Email: info@uk.metrologic.com
Hampshire RG21 6XG
ASIA
Singapore Metrologic Asia (Pte) Ltd Tel: 65-6842-7155
No. 8 Kaki Bukit Place Fax: 65-6842-7166
4th Floor Email: [email protected]ologic.com
Singapore 416186
China Metro (Suzhou) Technologies Co., Ltd. Tel: 86-512-62572511
221 Xing Hai Street Fax: 86-512-62571517
Suzhou Industrial Park Email: info@cn.metrologic.com
Suzhou, China
215021
Japan Metrologic Japan Co., Ltd. Tel: 81-03-3839-8511
Matsunoya Building, 6 Floor Fax: 81-03-3839-8519
3-14-8 Higashiueno Email: info@jp.metrologic.com
Taitou-Ku, Tokyo 110-0015 Japan
SOUTH AMERICA
Brazil Metrologic do Brasil Ltda. Tel: 55-11-5182-8226
Rua da Paz 2059 Fax: 55-11-5182-8315
CEP 04713-002 Email: info@br.metrologic.com
Chácara Santo Antônio
São Paulo, SP, Brasil
Outside Brazil Metrologic South America Tel: 5511-5182-7273
Rua da Paz 2059 Fax: 5511-5182-7198
CEP 04713-002 Email: info@sa.metrologic.com
Chácara Santo Antônio
São Paulo, SP, Brasil
Copyright
© 2002 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored
in any form or by any means without prior written consent, except by reviewer, who may quote brief passages in a review,
or provided for in the Copyright Act of 1976.
Products and brand names mentioned in this document are trademarks of their respective companies.
Table of Contents, Book 1 of 2 iii
TABLE OF CONTENTS BOOK 1 OF 2
Introduction
Symbol Key ................................................................................................. ix
Bar Code Configuration Methods
Single-Code Method.....................................................................................x
Multi-Code Method .......................................................................................x
Need to Start Over?
Recall Defaults ............................................................................................ xi
Section A: Code Types and Decode Rules
UPC/EAN......................................................................................................1
Code 128......................................................................................................3
Code 39........................................................................................................4
Interleaved 2 of 5..........................................................................................6
Standard 2 of 5.............................................................................................8
Other 2 of 5 Codes .......................................................................................9
Codabar......................................................................................................11
Code 11......................................................................................................12
Code 93......................................................................................................12
Telepen.......................................................................................................13
Plessey Codes............................................................................................14
Other Decode Features..............................................................................16
Configurable Code Lengths........................................................................17
Section B: Supplements
Two Digit Supplements/Redundancy ...........................................................1
Five Digit Supplements/Redundancy ...........................................................1
Supplements Required/Not Required...........................................................2
Remote Supplemental Requirement ............................................................2
Bookland (978) Supplement Required .........................................................3
977 (2 Digit) Supplement Required ..............................................................3
378/379 French Supplement Requirement...................................................3
Table Of Contents, Book 1 of 2 iv
TABLE OF CONTENTS BOOK 1 OF 2
Section B: Supplements (Continued)
434/439 German Supplement Required.......................................................4
414/419 German Supplement Required.......................................................4
# System 2 Requires Supplements ..............................................................4
# System 5 Requires Supplements ..............................................................5
Coupon Code 128 ........................................................................................5
Code 128 ‘]C1’ Extended Code Format........................................................5
Code 128 Group Separators ........................................................................6
100 msec to find Supplemental ....................................................................6
200 msec to find Supplemental ....................................................................6
400 msec to Find Supplemental...................................................................7
Code ID’s with Supplements ........................................................................7
Beep Once/Twice on Supplements ..............................................................8
ISBN Check Digit Transmission ...................................................................8
Bookland to ISBN Conversion......................................................................9
ISBN Re-Formatting .....................................................................................9
Section C: Communications
Enable RS-232 .............................................................................................1
Load Keyboard Wedge Defaults...................................................................1
Enable Light Pen/Wand Communication......................................................1
Enable Keyboard Wedge Emulation.............................................................1
Enable Stand-Alone Keyboard Scanner.......................................................1
Load OCIA Defaults......................................................................................2
Enable OCIA Output.....................................................................................2
Load IBM 46xx Defaults ...............................................................................2
Enable IBM 46xx Communication ................................................................2
Enable No Communication Mode.................................................................3
Reserved ......................................................................................................3
Table of Contents, Book 1 of 2 v
TABLE OF CONTENTS BOOK 1 OF 2
Section D: Scanner Operation
Configuration Mode Options.........................................................................1
Scan Buffers.................................................................................................2
Redundant Scans.........................................................................................4
Miscellaneous Decode Features ..................................................................6
Depth of Field Adjustments ..........................................................................7
Same Symbol Time Outs..............................................................................8
LED Options ...............................................................................................10
Beeper Options...........................................................................................11
Inter-Character Data Transmission Delays ................................................15
Inter-Record Data Transmission Delays.....................................................16
Communication Time Out Options .............................................................17
Host Scanner Commands ..........................................................................19
Power Save Modes ....................................................................................24
Miscellaneous Features..............................................................................28
Test Modes.................................................................................................29
Section E: Prefixes/Suffixes
Configurable Prefixes, All Data.....................................................................1
Configurable ID Characters, Code Specific..................................................3
Identifiers Character ...........................................................................3
Standard Prefix Characters ..........................................................................8
Standard Suffix Characters ........................................................................13
Longitudinal Redundancy Check (LRC) .....................................................15
Configurable Suffixes, All Data...................................................................16
Special Formats..........................................................................................19
Table of Contents, Book 2 of 2 vi
TABLE OF CONTENTS BOOK 2 OF 2
Introduction
Symbol Key ................................................................................................. ix
Bar Code Configuration Methods
Single-Code Method.....................................................................................x
Multi-Code Method .......................................................................................x
Need to Start Over?
Recall Defaults ............................................................................................ xi
Section F: Code Formatting
UPC/EAN......................................................................................................1
Codabar........................................................................................................5
Code 39........................................................................................................6
Code 11........................................................................................................7
Telepen.........................................................................................................7
Plessey.........................................................................................................8
2 of 5 ..........................................................................................................10
Section G: RS-232
Enable RS-232 Mode ...................................................................................1
Parity Features .............................................................................................2
Baud Rates...................................................................................................3
Data/Stop Bits...............................................................................................5
Hardware Handshaking................................................................................6
Software Handshaking .................................................................................9
Miscellaneous.............................................................................................12
Section H: Keyboard
Enable Keyboard Emulation.........................................................................1
Country/Scan Code Table Selects ...............................................................2
Keyboard/System Type ................................................................................4
Special Keyboard Features ..........................................................................5
Inter-Scan Code Delays ...............................................................................9
Table of Contents, Book 2 of 2 vii
TABLE OF CONTENTS BOOK 2 OF 2
Section H: Keyboard (Continued)
Control Sets................................................................................................10
3151 Terminal Keyboard ............................................................................12
Section I: OCIA
Load OCIA Defaults......................................................................................1
Enable OCIA.................................................................................................1
DTS/Siemens ...............................................................................................1
DTS/Nixdorf..................................................................................................1
NCR-S ..........................................................................................................1
NCR-F ..........................................................................................................1
Section J: Light Pen/Laser Emulation
Enable Light Pen Mode ................................................................................1
Space/Bar Height .........................................................................................1
Transmit Code 39.........................................................................................1
Transmit as Scanned....................................................................................1
Poll Light Pen Source...................................................................................2
Light Pen Extra Toggle.................................................................................2
10x Narrow Element Border .........................................................................2
50x Narrow Element Border .........................................................................2
Set Narrow Element Width ...........................................................................3
Laser Emulation............................................................................................3
Section K: IBM 46xx Configuration
Enable IBM 46xx Communication ................................................................1
Load IBM 46xx Defaults ...............................................................................1
IBM Ports......................................................................................................1
IBM Reserve Codes .....................................................................................2
Section M: Code Bytes
Code Byte Usage .........................................................................................1
Code Bytes 0-5.............................................................................................2
Code Bytes 6-9.............................................................................................3
Reserved Codes...........................................................................................4
Table of Contents, Book 2 of 2 viii
TABLE OF CONTENTS BOOK 2 OF 2
Section M: Code Bytes (Continued)
Code Byte/Code Type Table ........................................................................5
ASCII Reference Table.................................................................................6
Extended Key Code Reference Table........................................................11
Section N: Miscellaneous Features
Custom Defaults...........................................................................................1
Serial Program Mode....................................................................................3
Section O: Auxiliary Port Controls
Disable AUX Port..........................................................................................1
AUX Port and Secondary Device Data Formats
For the MS7220, MS7320, and MS7600......................................................1
When Using a Metrologic Device as a Secondary..............................1
When Using a non-Metrologic RS-232 Device as a Secondary .........3
Additional AUX Port Data Formats...............................................................4
AUX Port Baud Rates...................................................................................5
AUX Port Parity ............................................................................................7
AUX Port Stop/Data Bits...............................................................................8
Enable/Disable RTS/CTS Handshaking.......................................................9
Message AUX RTS/CTS ..............................................................................9
Character AUX RTS/CTS.............................................................................9
Enable/Disable D/E Commands...................................................................9
Enable/Disable F/L Commands..................................................................10
Enable/Disable M/O Commands ................................................................10
Enable/Disable XON/XOFF........................................................................10
Enable/Disable ACK/NAK...........................................................................11
AUX CTS/RTS Polarity...............................................................................11
Main Output Port Auxiliary Data Formats...................................................12
Inter-Character Delays ...............................................................................14
Introduction ix
INTRODUCTION
Your new scanner has been configured at the factory with a set of default communication
protocols. Since many host systems have unique formats and protocol requirements,
Metrologic provides a wide range of configurable features that may be selected with the
use of this bar code configuration guide.
Once the configuration is completed, the scanner stores the settings in nonvolatile
memory or NOVRAM. NOVRAM saves the settings when the power is turned off.
Symbol Key
*(asterisk) Default Feature
~ (tilde) Feature requires the Multi-Code Configuration Method,
see Bar Code Configuration Methods on page x.
Important!
Note
Bar Code Configuration Methods x
BAR CODE CONFIGURATION METHODS
Metrologic scanners can be bar code configured in two ways: the Single-Code Method
and the Multi-Code Method.
Single-Code Method
Most features can be enabled or disabled using the Single-Code Method.
1. Power up the scanner.
2. Scan the bar code(s) for the desired feature(s).
3. Observe a multi-toned, “save setting” beep that indicates the configuration has
been saved to NOVRAM.
Multi-Code Method
All features can be enabled or disabled using the Multi-Code Method.
A feature marked with a “~” requires the Multi-Code Method.
1. Power up the scanner.
2. Scan the Enter/Exit Configuration Mode bar code. [3 beeps]
3. Scan the bar code(s) for the desired feature(s). [1 beep]
4. Scan the Enter/Exit Configuration Mode bar code [3 beeps] and
save new configuration.
Enter/Exit Configuration Mode
³999999
To abort a configuration change, power off the scanner before scanning the
Enter/Exit Configuration Mode bar code.
Tabla de contenidos
Otros manuales de Lector de código de barras de Metrologic
Metrologic
Metrologic MS1633 FocusBT Manual de usuario
Metrologic
Metrologic ScanQuest IS4110 Manual de usuario
Metrologic
Metrologic Tire and Rubber Guía del usuario
Metrologic
Metrologic TECH 8 Manual de usuario
Metrologic
Metrologic Stratos MS2xxx Series Instrucciones de instalación y funcionamiento
Metrologic
Metrologic StratosS MS2222 Manual de usuario
Metrologic
Metrologic FocusE IS1650 Manual de usuario
Metrologic
Metrologic MK3780-31A62 Manual de usuario
Metrologic
Metrologic IS1000 Series Manual de usuario
Metrologic
Metrologic MS770 Manual de usuario
Metrologic
Metrologic MS9500 Voyager Series Manual de usuario
Metrologic
Metrologic MS5100 Eclipse Series Manual de usuario
Metrologic
Metrologic MS7820 Solaris Manual de usuario
Metrologic
Metrologic MS700i Manual de usuario
Metrologic
Metrologic StratosE MS2122 Manual de usuario
Metrologic
Metrologic MK5145-31A38 Manual de usuario
Metrologic
Metrologic MS6130 Manual de usuario
Metrologic
Metrologic MS5100 Eclipse Series Manual de usuario
Metrologic
Metrologic MS 1690 Focus Series Manual de usuario
Metrologic
Metrologic MK9520-37A38 Manual de usuario
