MegaLite AXIS 500 Manual de usuario

Check that the unit has not been damaged during transport

Protection Against Fire

1. Maintain a minimum of 1 foot distance from any type of flame.

2. This equipment is designed to be used only ith the follo ing lamp:

1 MSR 575/2

2 MDS 575

3.NSK 575

3. Replace fuse only ith the specified type and rating.

4. Do Not install the unit to close to a heat source.

5. Make sure cable are properly secured a ay from unit movement.

6. Maximum surface operating temperature 80º.

Protection Against Fire

1. Disconnect po er before lamp replacement or servicing.

2. For connection to main po er supply proceed to page 4.

3. This unit must be earthed. (electronically grounded)

4. Do not expose unit to rain or moisture.

Protection Against Mechanical Hazards

1. Make sure head movement is not blocked.

2. Use safety chain hen hanging unit

3. Unit surface may reach high temperature. Allo about 5 minutes after lamp has been turned off be-

fore moving.

4. Replace lamp before it exceeds the lamp life.

Protection Against UV Radiation

1. Do not look directly at the lamp hen cover are off and lamp is on.

2. Do not start unit ith out lamp covers or if the protection screens, or ultraviolet filters.

Part Numbers

Fixture Lamp Flight Case

1010 - AXIS 500 L-MSR575/2 - Phillips MSR575/2 P-1010DUALCASE

L-MSD575 –Phillips MSD 575

L-NSK575

Mechanical Specifications

in: 20”L x 17”W x 26”H

eight: 78.lb 35.40kg

in: 22”L x 22”W x 27.5”H

eight: 93 lb 42.25kg

Pan: 540° Tilt: 270°

DMX Connectors: 3-pin XLR connectors

Reflector: Glass reflector ith cold mirror coating

Thermal: Maximum ambient temperature 35°

Maximum surface temperature 80°

Mounting Points: 4 pairs of L-turn locks

Fastening System: 2 quick clamp release

Electrical Specifications

Lamp: MSR 575/2—NSK575 MSD 575 (optional)

Light output: 12,000 ANSI lumens 10,000 ANSI lumens

Lamp life: 500-750 hours 3,000 hours

Color temperature: 6200K 5600K

Power Consumption: 120V 50/60hz

Lamp Life: 700 hours

ase: GX-9.5

Control: Automatic and remote lamp on/off

allast: Magnetic

20” W/ Handles 17”

8” 18.75”

6”

20”

20.5”

Electromechanical Effects

5.5”

Size Packaged for Shipping

Focus: Motorized focus

Zoom: Motorized multi-step zoom (15° , 18° and 22°)

Prism: 3-Facet prism rotating in both directions at different speeds

Iris: Motorized

Dimmer / Shutter: Full range dimming and variable strobe effect

Technical Features

Main Power Connection

Caution!

1. Do not connect fixture to a dimmer system.

2. This unit must be earthed. (electronically grounded)

3. Replace fuse only ith the specified type and rating.

The occupation of the connection-cable is as follo s:

Cable (USA) Cable (EU) Pin International

Black Bro n

White

Green

Light Blue

Yello /Green

Live

Neutral

DMX-512 Connection

110V 50/60hz Connection

The fixture is equipped ith 3 pin XLR Sockets for DMX input and output. The sockets are ired in parallel. Only use a shielded

t isted pair cable designed for RS-485 and 3 pin XLR plugs and connectors in order to connect the controller ith the fixture or

the fixture ith another.

DMX—input DMX—output

1. Shield

2. Signal (-)

3. Signal (+)

Caution!

At the last fixture the DMX signal needs to be terminated ith a terminator. Solder a 120

Ohm resistor bet een the (-) and the (+) signal into a 3 pin XLR plug and plug it in to the

last fixture on the signal run. Pre-manufactured terminator plugs are available for

purchase from your Mega-Lite dealer (HOS-DMXT).

Note: After s itching the unit on it ill automatically detect hether DMX 512 data is received or not . If it is not receiving DMX

512 data the display screen ill start to flash “A001” ith the set address number. Once it receives proper DMX 512 signal the

display ill stop flashing.

Lamp Replacement

Caution!

1. Disconnect po er before you begging.

2. Allo 15min for the unit and lamp to cool.

3. Do not touch lamps glass envelope ith your fingers. If this happens clean ith alco-

hol / to remove oils.

Remove the scre s X, Y, and Z for re-lamping

Adjust lamp position by turning scre s A,B and C

Disconnect the fixture from AC po er before re-lamping.

Lamp is hot! Risk of fire! Protect hands and eyes.

Wait at least 15min. Before opening covers

And removing lamp from fixture.

WARNING!

Maximum room temperature t=40ºC

Minimum distance from flammable material d=0.7m.

Exterior surface temperature T=80ºC.

Not for domestic use.

To insert the lamp MSR 575/2, NSK575 or MSD 575. Us a Phillips

scre driver to unscre the bolts marked XY and Z. Carefully pull out

the cover ith the lamp socket and remove the old lamp from the

socket. Make a note that there is a large and small pole insert the ne

lamp into corresponding socket.

Do not install a higher attage lamp this ill void your arranty. Please

note the light bulb manufactures arnings. Do not touch the bulb ith

bare hands. Close lamp cover hile making sure that the cables are

not pinched or touching the lamp. Tighten the XYZ scre s.

Before striking the lamp reset the lamp timer by going to the LAti sec-

tion of your display screen. In order to reset the lamp counter to 0 you

have to hold the up and do n button and press the enter button.

Due to the difference bet een lamps. Fine adjustment may improve light performance. You ill need to strike the lamp and set

the light so the optical path is clear. You ill need to turn the scre s A, and C one after another a slight turn clock ise and

counter clock ise until you set the hot spot of the light in the center of the image. If no hot spot can be seen then set the lamp till

the light is evenly distributed.

Lamp Placement

Lamp Adjustment

Rigging the fixture

Caution!

1. The installations must be carried out by an authorized dealer or trained professional.

2. Unit may cause severe injures if you have doubts concerning the safety do not install.

3. Unit is to be 24inches a ay from flammable materials (decoration material)

4. Use high quality installation equipment to hang unit.

When rigging a unit it is very important that you follo common safety procedures. Rigging requires extensive experience includ-

ing but not limited to calculating orking loads, material being used and periodic safety inspections. If you lack these qualifica-

tions, do not attempt the installation yourself, instead use a professional structural rigger.

When rigging the unit al ays be secured ith a secondary safety attachment. The installation location of the projector has got to

be built in the ay that it can hold 10 times the eight for 1 hour ith out any harming. Installation should be checked at least

one time a year by a skilled person.

          

Gobo Wheels

1: Open

2: Deep Red

3: Yello

4: Magenta

5: Green

6: Red

7: Blue

8: Pink

9: Cyan

10: Light Blue

1: Open

2: Orange

3: Blue

4: Light Green

5: Cyan

6: Magenta

7: Yello

8: CTB

9: CTO

10: Deep Purple

Color Wheel 2

Color Wheel 1

Dichroic Glass Gobo: Diameter 27 mm Image 24 mm Thickness 4 mm max

Gobo Wheel 1 Fixed

1: Open

2: Mega Gear

3: Blue Halo

4: Broken Glass

5: Rock

6: Circles

7: Every Way

8: Boomerangs

9: Bars

10: Pebbles

1: Open

2: Metal Curtin

3: Velvet Ripel

4: Hell Cloud

5: Magenta Sun

6: Bubbles

7: Bar

Gobo Wheel 2 Rotating

Axis 500 DMX profile-version 1.0

DMX Channel Function Description Value

1 Pan Pan course 0-255

2 Tilt Tilt course 0-255

3 Pan Fine Pan fine 0-255

4 Tilt Fine Tilt fine 0-255

1-249

250-252

253-255

Max speed (tracking mode)

Max to min speed (vector mode)

Changes

Changes ith pan and tilt movement

Speed

0-127

128-139

230-239

Fan speed from fast to slo

Lamp on

Lamp off (hold 3 seconds)

Control

0-255

194-255

128-190

115

102

Open

Color macros if channel 8 set bet een 128-255

Back ard rainbo effect fast to slo

For ard rainbo effect fast to slo

Orange

Green

Cyan

Magenta

Yello

Light Green

Blue

Red

Light blue

Color 1

(Bi-color beam if set

bet een color)

0-11

128-255

120-127

108-119

96-107

84-95

72-83

60-71

48-59

36-47

24-35

12-23

Enable macro color function on Channel 7

Open

UV filter

3200K filter

6000K filter

Yello

Magenta

Cyan

Pink

Deep Blue

Deep red

Open

Color 2

(Snap color heel)

1-63

65-127

Open

For ard rotation from fast to slo

No rotation

Back ard rotation from slo to fast

Prism

Prism gobo macro1 128-135

Prism gobo macro 2 136-143

Prism gobo macro 3 144-151

Prism gobo macro 4 152-159

Prism Con’t

216-223

208-215

200-207

192-199

184-191

176-183

168-175

160-167

Prism gobo macro 12

Prism gobo macro 11

Prism gobo macro 10

Prism gobo macro 9

Prism gobo macro 8

Prism gobo macro 7

Prism gobo macro 6

Prism gobo macro 5

248-255

240-247

232-239

224-231

Prism gobo macro 16

Prism gobo macro 15

Prism gobo macro 14

Prism gobo macro 13

56-63

48-55

40-47

32-39

24-31

16-23

8-15

0-7

Gobo 7 Boomerang

Gobo 6 Every ay

Gobo 5 3 Circles

Gobo 4 Rock

Gobo 3 Broken glass

Gobo 2 Blue halo

Gobo 1Mega gear

Open

96-111

80-95

72-79

64-71

Gobo 2 With variable gobo shaking

Gobo 1 With variable gobo shaking

Gobo 9 Pebbles

Gobo 8 Bars

224-255

208-223

192-207

176-191

160-175

144-159

128-143

112-127

Gobo heel rotation slo to fast

Gobo 9 With variable gobo shaking

Gobo 8 With variable gobo shaking

Gobo 7 With variable gobo shaking

Gobo 6 With variable gobo shaking

Gobo 5 With variable gobo shaking

Gobo 4 With variable gobo shaking

Gobo 3 With variable gobo shaking

Gobo Wheel 1

32-63

0-31

Gobo 1 Metal curtain

Open

224-255

192-223

160-191

128-159

96-127

64-95

Gobo heel rotation slo to fast

Gobo 6 Metal bar

Gobo 5 Space bubbles

Gobo 4 Magenta sun

Gobo 3 Hell cloud

Gobo 2 Velvet ripple

Gobo Wheel 2

(Rotating/Indexing)

Rotating/ Indexing

(Gobo Wheel 2)

Gobo Indexing 0-127

For ard gobo rotation fast to slo 128-191

No rotation 192-

Back ard gobo rotation slo to fast 193-255

Iris

Open 0

Max diameter to min diameter 1-179

Closed 180—191

Pulse fast to slo 192-255

86-170

0-85

18º Beam ith focus cont far to near

15º Beam ith focus cont far to near

128-159

96-127

64-95

32-63

0-31

171-255

Pulse effect slo to fast

Shutter open

Strobe slo to fast

Shutter open

Shutter closed

22º Beam ith focus cont far to near

Focus / Zoom

0-255

225-255

192-233

160-191

Dimmer from 0% to 100%

Shutter open

Random strobe slo to fast

Shutter open

Shutter

16 Dimmer

Tabla de contenidos

Otros manuales de Equipo de iluminación de MegaLite

MegaLite

MegaLite LIGHT PIPE 5049-03 Manual de usuario

MegaLite

MegaLite Outerbot WASH 340 Manual de usuario

MegaLite

MegaLite DECO Driver CV4 Manual de usuario

MegaLite

MegaLite Drama Strip P840 Manual de usuario

MegaLite

MegaLite Linebot Q480 Manual de usuario

MegaLite

MegaLite DECO CITYSCAPE Q30 Manual de usuario

MegaLite

MegaLite LUPA-7 Manual de usuario

MegaLite

MegaLite Circa Manual de usuario

MegaLite

MegaLite TUFFBABYVW-42 Manual de usuario

MegaLite

MegaLite dreambeam nine Manual de usuario

MegaLite

MegaLite IDOL-LITE P24 Manual de usuario

MegaLite

MegaLite Pro Color Strip Manual de usuario

MegaLite

MegaLite LEDiLINE M485 Series Guía

MegaLite

MegaLite Deco Flex C Manual de usuario

MegaLite

MegaLite Pro Color Cannon 3000 Manual de usuario

MegaLite

MegaLite Axis QD7 Manual de usuario

MegaLite

MegaLite Drama Profile VW2 Manual de usuario

MegaLite

MegaLite Axis LED Manual de usuario

MegaLite

MegaLite cobra 1500 Manual de usuario

MegaLite

MegaLite DECO Driver CV4 Manual de usuario

MegaLite

MegaLite baby color Q70 IR Manual de usuario

MegaLite

MegaLite Drama LED Q170 Manual de usuario

MegaLite

MegaLite Deco Pendant Q20 Manual de usuario

MegaLite

MegaLite AXIS 250 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario