Measurement Computing PCI-DAS4020/12 Manual de usuario

PCI-DAS4020/12

Analog & Digital I/O

User’s Guide

Document Revision 9A, May, 2009

HM PCI-DAS4020-12.doc

Trademark and Copyright Information

Measurement Computing Corporation, InstaCal, Universal Library, and the Measurement Computing logo are

either trademarks or registered trademarks of MeasurementComputing Corporation. Refer to the Copyrights &

Trademarks section on mccdaq.com/legal for more information about Measurement Computing trademarks.

Other product and company namesmentioned herein are trademarks or trade names of their respective

companies.

reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic,mechanical, by

photocopying, recording, or otherwise without the prior written permission of Measurement Computing

Corporation.

Notice

Measurement Computing Corporation does not authorize any Measurement Computing Corporation product for

use in life support systems and/or devices without prior written consent from Measurement Computing

Corporation. Life support devices/systems are devices or systems that, a) are intended for surgical implantation

into the body, or b) support or sustain life and whose failure to perform can be reasonably expected to result in

injury. Measurement Computing Corporation products are not designed with the components required, and are

not subject to the testing required to ensure a level of reliability suitable for the treatment and diagnosis of

people.

Table of Contents

Preface

About this User's Guide.......................................................................................................................7

What you will learn from this user's guide.........................................................................................................7

Conventions in this user's guide .........................................................................................................................7

Where to find more information.........................................................................................................................7

Chapter 1

Introducing the PCI-DAS4020/12.........................................................................................................8

Overview: PCI-DAS4020/12 features................................................................................................................8

Software features................................................................................................................................................8

Chapter 2

Installing the PCI-DAS4020/12.............................................................................................................9

What comes with your PCI-DAS4020/12 shipment?.........................................................................................9

Hardware .......................................................................................................................................................................... 9

Additional documentation................................................................................................................................................. 9

Optional components........................................................................................................................................................ 9

Unpacking the PCI-DAS4020/12 .....................................................................................................................10

Installing the software ......................................................................................................................................10

Installing the PCI-DAS4020/12........................................................................................................................10

Configuring the PCI-DAS4020/12...................................................................................................................10

Connecting the board for I/O operations ..........................................................................................................11

Connectors, cables –I/O connectors................................................................................................................................11

BNC connectors...............................................................................................................................................................11

Pin out –auxiliary connector...........................................................................................................................................12

Cabling.............................................................................................................................................................................12

Field wiring, signal termination and conditioning ...........................................................................................................16

Chapter 3

Functional Details...............................................................................................................................17

PCI-DAS4020/12 block diagram......................................................................................................................17

Analog input signal path...................................................................................................................................17

Analog output...................................................................................................................................................18

Digital I/O.........................................................................................................................................................18

Power distribution.............................................................................................................................................18

Input impedance configuration.........................................................................................................................18

Chapter 4

Calibrating the PCI-DAS4020/12........................................................................................................21

Calibration theory.............................................................................................................................................21

Chapter 5

Specifications......................................................................................................................................22

Analog input.....................................................................................................................................................22

Timing and throughput ....................................................................................................................................................22

Accuracy..........................................................................................................................................................................23

Temperature.....................................................................................................................................................................23

Dynamics and noise.........................................................................................................................................................24

Trig/Ext Clk BNC.............................................................................................................................................24

Analog output...................................................................................................................................................24

Accuracy..........................................................................................................................................................................25

Digital input / output.........................................................................................................................................25

Interrupts...........................................................................................................................................................25

PCI-DAS4020/12 User's Guide

Environmental ..................................................................................................................................................25

Power consumption ..........................................................................................................................................26

Connector and pin out.......................................................................................................................................26

Auxiliary connector P3 pinout.........................................................................................................................................26

Declaration of Conformity..................................................................................................................27

Preface

About this User's Guide

What you will learn from this user's guide

This user's guide explains how to install, configure, and use the PCI-DAS4020/12 so that you get the most out

of its analog and digital I/O features.

This user's guide also refers you to related documents available on our web site, and to technical support

resources.

Conventions in this user's guide

For more information on …

Text presented in a box signifies additional information and helpful hints related to the subject matter you are

reading.

Caution! Shaded caution statements present information to help you avoid injuring yourself and others,

damaging your hardware, or losing your data.

< : > Angle brackets that enclose numbers separated by a colon signify a range of numbers, such as those assigned

to registers, bit settings, etc.

bold text Bold text is used for the names of objects on the screen, such as buttons, text boxes, and check boxes. For

example:

1. Insert the disk or CD and click the OK button.

italic text Italic text is used for the names of manuals and help topic titles, and to emphasize a word or phrase. For

example:

The InstaCal installation procedure is explained in the Quick Start Guide.

Never touch the exposed pins or circuit connections on the board.

Where to find more information

For additional information relevant to the operation of your hardware, refer to the Documents subdirectory

where you installed the MCC DAQ software (C:\Program Files\Measurement Computing\DAQ by default), or

search for your device on our website at www.mccdaq.com.

If you need to program at the register level in your application, refer to the Register Map for the PCI-

DAS4020/12 Series (available at www.mccdaq.com/registermaps/RegMapPCI-DAS4020-12.pdf

Chapter 1

Introducing the PCI-DAS4020/12

Overview: PCI-DAS4020/12 features

This manual explains how to install and use the PCI-DAS4020/12 board.

The PCI-DAS4020/12 is a multi-function high-speed data acquisition I/O board that is designed for the PCI bus.

It provides the following features:

Four high-speed 12-bit analog input channels

The input range for each channel is software-configurable for ±1 V or ±5 V. The sample rate is from 10 to

20 MHz, depending on the number of channels accessed. Triggering sources and A/D gating are via

hardware or software, and can be internal or external. Four different modes are software selectable. Analog

input connectors are standard BNC types.

Two 12-bit analog output channels

Each analog output channel can be configured by software for an output range of ±10 V or ±5 V.

Throughput is system-dependent. Triggering mode is software gate. D/A pacing is software paced. The

analog output channels terminate at a 40-pin auxiliary connector.

24 digital I/O channels

An on-board industry standard 82C55A I/O chip provides 24 digital I/O channels configured as two banks

of eight and two banks of four. You can configure each bank independently as input or output. Signal levels

are TTL. The digital I/O channels terminate at a 40-pin auxiliary connector.

Software features

For information on the features of InstaCal and the other software included with your PCI-DAS4020/12, refer

to the Quick Start Guide that shipped with your device. The Quick Start Guide is also available in PDF at

www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf.

Check www.mccdaq.com/download.htm for the latest software version or versions of the software supported

under less commonly used operating systems.

Chapter 2

Installing the PCI-DAS4020/12

What comes with your PCI-DAS4020/12 shipment?

The following items are shipped with the PCI-DAS4020/12.

Hardware

PCI-DAS4020/12

Additional documentation

In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at

www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). This booklet supplies a brief description of

the software you received with your PCI-DAS4020/12 and information regarding installation of that software.

Please read this booklet completely before installing any software or hardware.

Optional components

If you ordered any of the following products with your board, they should be included with your shipment.

Cables

C40FF-x

C40-37F-x

BP40-37F-x

Signal termination and conditioning accessories

MCC provides signal termination products for use with the PCI-DAS4020/12. Refer to "Field wiring, signal

termination and conditioning" on page 16 for a complete list of compatible accessory products.

PCI-DAS4020/12 User's Guide Installing the PCI-DAS4020/12

Unpacking the PCI-DAS4020/12

As with any electronic device, you should take care while handling to avoid damage from static

electricity. Before removing the PCI-DAS4020/12 from its packaging, ground yourself using a wrist strap or by

simply touching the computer chassis or other grounded object to eliminate any stored static charge.

If any components are missing or damaged, notify Measurement Computing Corporation immediately by

phone, fax, or e-mail:

Phone: 508-946-5100 and follow the instructions for reaching Tech Support.

Fax: 508-946-9500 to the attention of Tech Support

Email: techsupport@mccdaq.com

Installing the software

Refer to the Quick Start Guide for instructions on installing the software on the Measurement Computing Data

Acquisition Software CD. This booklet is available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-

Quick-Start.pdf.

Installing the PCI-DAS4020/12

The PCI-DAS4020/12 board is completely plug-and-play, with no switches or jumpers to set. Configuration is

controlled by your system's BIOS. To install your board, follow the steps below.

Install the MCC DAQ software before you install your board

The driver needed to run your board is installed with the MCC DAQ software. Therefore, you need to install the

MCC DAQ software before you install your board. Refer to the Quick Start Guide for instructions on installing

the software.

1. Turn your computer off, open it up, and insert your board into an available PCI slot.

2. Close your computer and turn it on.

If you are using an operating system with support for plug-and-play (such as Windows 2000 or

Windows XP), a dialog box opens as the system loads, indicating that new hardware has been detected. If

the information file for this board is not already loaded onto your PC, you are prompted for the disk

containing this file. The Measurement Computing Data Acquisition Software CD supplied with your board

contains this file. If required, insert the disk or CD and click OK.

3. To test your installation and configure your board, run the InstaCal utility installed in the previous section.

Refer to the Quick Start Guide that came with your board for information on how to initially set up and

load InstaCal.

If your board has been powered-off for more than 10 minutes, allow your computer to warm up for at least

15 minutes before acquiring data. This warm-up period is required in order for the board to achieve its rated

accuracy. The high speed components used on the board generate heat, and it takes this amount of time for a

board to reach steady state if it has been powered off for a significant amount of time.

Configuring the PCI-DAS4020/12

All of the hardware configuration options on the PCI-DAS4020/12 are software controlled. Use InstaCal to

select the number of channels to sample (one, two or four channels), and the analog output range (±10 V or

±5 V.) Once selected, any program that uses the Universal Library will initialize the hardware according to your

selections.

Otros manuales para PCI-DAS4020/12

Tabla de contenidos

Otros manuales de Sistema de E/S de Measurement Computing

Measurement Computing

Measurement Computing USB-1208HS Manual de usuario

Measurement Computing

Measurement Computing CIO-DIO96 Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS1000 Manual de usuario

Measurement Computing

Measurement Computing USB-231-OEM Manual de usuario

Measurement Computing

Measurement Computing USB-1408FS-Plus Manual de usuario

Measurement Computing

Measurement Computing USB-2404-60 Manual de usuario

Measurement Computing

Measurement Computing USB-1208FS-Plus-OEM Manual de usuario

Measurement Computing

Measurement Computing PCI-DAC6702 Manual de usuario

Measurement Computing

Measurement Computing PCI-DIO24/LP Manual de usuario

Measurement Computing

Measurement Computing USB-1608G-OEM Manual de usuario

Measurement Computing

Measurement Computing USB-1616HS-BNC Manual de usuario

Measurement Computing

Measurement Computing PCIe-DIO24 Manual de usuario

Measurement Computing

Measurement Computing miniLAB 1008 Manual de usuario

Measurement Computing

Measurement Computing USB-1208LS Manual de usuario

Measurement Computing

Measurement Computing USB-2533 Manual de usuario

Measurement Computing

Measurement Computing USB-1208FS-Plus Manual de usuario

Measurement Computing

Measurement Computing USB-1616HS Manual de usuario

Measurement Computing

Measurement Computing USB-1608FS-Plus Manual de usuario

Measurement Computing

Measurement Computing PCIM-DDA06/16 Manual de usuario

Measurement Computing

Measurement Computing USB-1208HS-4AO Manual de usuario

Measurement Computing

Measurement Computing USB-DIO96H/50 Manual de usuario

Measurement Computing

Measurement Computing USB-231 Manual de usuario

Measurement Computing

Measurement Computing PCI-DIO24 Manual de usuario

Measurement Computing

Measurement Computing USB-DIO24 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario