McAfee VIRUSSCAN ENTERPRISE 8.7I PATCH 2 - S... Manual de instrucciones

Release Notes for McAfee®VirusScan®Enterprise 8.7i

Patch 2

Thank you for using McAfee VirusScan Enterprise software version 8.7i Patch 2. This document contains important

information about this release. We strongly recommend that you read the entire document.

Contents

zPurpose

zRating

zImprovements

{Previous Improvements

zKnown issues

zResolved issues

{Patch 2 resolved issues

{Patch 1 resolved issues

zInstallation instructions

{Verifying installation

{Removing the patch

zLicense attributions

About this release

zPatch Release: 08-31-2009

This release was developed for use with:

zVirusScan Enterprise: 8.7i

zDetection Definitions (DAT): 5700.0000

zScan Engine: 5.3.01

Make sure you have installed the correct version of the product(s) in this list before using this release.

*This document makes references to the following products as VirusScan Modules:

zMcAfee®VirusScan®Enterprise for Offline Virtual Images 1.0

zMcAfee®VirusScan®Enterprise for Offline Virtual Images 2.0

zMcAfee®VirusScan®Enterprise for use with SAP NetWeaver®platform 1.0

zMcAfee®VirusScan®Enterprise for Storage 1.0

Purpose

This document supplements the product Release Notes in the release package and details fixes included in

VirusScan Enterprise 8.7i Patch 2.

This Patch contains a variety of improvements. McAfee has spent a significant amount of time finding, fixing, and

testing the fixes in this release. Please review the Known and Resolved Issues lists for additional information on the

individual issues. Refer to online KnowledgeBase article KB66795 at http://knowledge.mcafee.com for the most

current information regarding this release.

Rating

McAfee recommends this release for all environments. Patch 2 is considered a High Priority Release. See McAfee

Support KnowledgeBase article KB51560 for information on ratings.

Improvements

This release of the software includes the following improvements.

1. Improvements were made to the way that the CommonShell scanner interacts with file I/O. This improves

performance with on-access scanners within the product.

2. VirusScan Enterprise 8.7i Patch 2 now has the ability to report compliance to the newer versions of

Windows

Security Center.

3. The VirusScan Enterprise 8.7i extension has improved support for ePolicy Orchestrator 4.5 with Firefox 3.0

and Internet Explorer 8.0.

4. Several modification were made to the way that VirusScan Enterprise's system tray icon interacts with the

new functionality of McAfee Agent 4.5.

5. The file extension .txt was added to the SmoothWritesExtension registry value to increase performance in

handling text files.

6. Russian language support was added to the VirusScan Enterprise user interface, NAP file, and extension.

NOTE: See items #3 and #4 under Known Issues for further information about this topic.

Previous Improvements

Previous releases of the software include the following improvements.

1. The VirusScan Reports extension now has updated queries to show the status of Artemis settings for the on-

access, on-demand, and email scanners.

NOTE: The Artemis status requires VirusScan Enterprise 8.5i Patch 8 or VirusScan Enterprise 8.7i

Patch 1 to

be installed on the client systems, in order to correctly populate the reports. Refer to McAfee Support

KnowledgeBase article KB53732 for further information on Artemis functionality.

2. On-Access Scanner’s Artemis level setting is now modifiable via the properties UI, and the equivalent

VirusScan 8.7i NAP and Extension included in the patch package.

NOTE: Because this setting is new with this release of the VirusScan 8.7i NAP and extension, there is no

preserved setting upon check-in of the management package. The ePolicy Orchestrator administrator will

need to update that setting in the policies to match the current Artemis policy.

3. Several modifications have been made to the way VirusScan Enterprise interacts with the operating system

on startup, suspend, and shutdown. These modifications resolve and improve performance issues.

4. Current DAT files are compressed to conserve network bandwidth. Now, changes have been made to

decompress the DATs during the AutoUpdate process and leave them in that state, so that scanners do not

have to decompress them during initialization of the scan.

5. The on-demand scanner now uses Windows Priority Control setting for the scan process. This lets the

operating system set the amount of CPU time that the on-demand scanner receives at any point in the scan

process. The System Utilization setting in the On-Demand Scan Properties maps to Windows Priority Control

as:

6. The on-access, on-demand, email, and script scanners now use a runtime copy of the DATs. This change

has reduced the memory consumption of affected scanners by having the DATs in a readily available state

for the scan engine to load.

NOTE: In some scenarios, the runtime DATs are not available. See item #1 under Known Issues. Refer to

Utilization Priority

10% Low

20%-50% Below Normal

60%-100% Normal

McAfee Support KnowledgeBase article KB65459 for further information on runtime DATs.

7. VirusScan Enterprise functions that request the current version of DATs no longer need to initialize the scan

engine to do so. This prevents excessive CPU spikes during ePolicy Orchestrator properties collection, as well

as other areas that poll the DATs.

8. The on-access scanner memory scan function (Processes on enable) has been modified significantly to make

it more comprehensive.

NOTE: The improved functionality can cause a performance impact to the system. See item #2 under

Known Issues.

9. When a web browser opens a site that is script-intensive, scanning the scripts adds to the delay of loading

the page. This Patch contains new functionality for ScriptScan whitelisting. If the web site is a trusted

Intranet and/or frequently visited, the new

implementation now allows for the exclusion of that the site from

script scanning.

NOTE: Refer to McAfee Support KnowledgeBase article KB65382 for further information.

10. The installation packages for patches and reposts have been upgraded so that the installation log name,

created in the McAfeeLogs folder, has a dynamically generated name based on the current date and time of

the installation. This helps save logs that might have been overwritten with the previous “backup previous

log only” method.

Known issues

Known issues in this release of the software are described below:

1. Issue: In some situations, the product switches over to using the normal copy of the DAT files, instead of

the runtime DATs:

{If the McAfee AntiSpyware Enterprise module is installed after

VirusScan Enterprise 8.7i Patch 1 is on

the system, some of the new registry settings, which are new for the runtime functionality, were

changed back. This resolves itself with a restart of the McTaskManager service or with a reboot.

{If one of the scanners is busy on a large file when the AutoUpdate process posts the revised copy of

the DATs, the process of refreshing the runtime copy of the DATs times out. All scanners use the

normal DATs until the next successful update.

{The VirusScan Modules* will not use the runtime DAT functionality until they received their next

Patch.

2. Issue: With the improved functionality of the on-access scanner memory scan, lower and middle ranged

systems may see a performance impact at startup and after a successful AutoUpdate of the engine or DATs.

Currently the Process on enable option is enabled by default on the shipping version of VirusScan Enterprise

8.7i. McAfee recommends that in a managed environment, disable this option prior to deployment of the

Patch, until the impact of memory scanning can be determined for your environment. It is not possible to

maintain both the more comprehensive scanning that comes with Patch 1 and later, and the former level of

scanning. Therefore, only the more comprehensive scan is used.

NOTE FOR CURRENT AND NEW USERS:

{The Patch installation does not modify current settings to disable the Process on enable option.

{The VirusScan 8.7i NAP and extension that are

included with the Patch do change the McAfee Default

policy, but do not modify the My Default policy, or any custom policy settings that were made

prior to

the checkin of the new NAP/extension.

{The VirusScan Enterprise 8.7i Repost with Patch now installs with the Process on enable option

disabled, unless the Maximum Security option is selected during the installation.

3. Issue: With the introduction of support for Russian, you might need to remove the previous version of the

extension from ePolicy Orchestrator before adding the new extension. If you do not, some of the interface

might be displayed in the original language.

4. Issue: McAfee Agent 4.0 Patch 2 and later include support for displaying status and logs in Russian. Older

versions display this information in English by default.

5. Issue: Since VirusScan Enterprise 8.7i Patch 2 and later include the new interface for reporting status to

Windows Security Center, uninstalling the Patch removes this function -- without reintroducing the older

expired function. This means that Windows Security Center does not report VirusScan Enterprise 8.7i being

installed until Patch 2 or later is implemented.

6. Issue: When you remove the McAfee AntiSpyware Module, the status in Windows Security Center is not

updated.

7. Issue: In deployments of VirusScan Enterprise 8.7i Patch 2 with McAfee Agent 4.5, the VirusScan tray plug-

in does not appear until after a restart of the McAfee system tray icon. If VirusScan is uninstalled, the

VirusScan tray plug-in is still visible until a similar restart.

8. Issue: This Patch adds needed support for McAfee VirusScan Enterprise for Offline Virtual Images 2.0, and

should not be removed unless the VirusScan Module is removed first.

9. Issue: The Patch installer included an MSI deferred action to resolve an issue found when attempting to

uninstall the Patch on some newer operating systems. The deferred.mfe file updated the cached MSI of the

currently installed VirusScan 8.7i product. If the Patch is included in a McAfee Installation Designer

customized package, the deferred.mfe file was not included, and therefore the

Patch might not be able to be

uninstalled in some newer operating systems.

10. Issue: If you installed this release interactively and cancelled the installation on a system where a previous

Patch was installed, after the rollback was complete, the previous Patch might no longer reported to ePolicy

Orchestrator or appeared in the About VirusScan Enterprise window.

11. Issue: Installing the Patch and specifying a log file path using the Microsoft Installer (MSI) switch “/L” did

not log to the specified path. A log file capturing full data was logged to the folder “McAfeeLogs” under the

Temp folder.

12. Issue: If Host Intrusion Prevention 6.x or later was installed and disabled prior to installing VirusScan

Enterprise, it was necessary to re-enable Host Intrusion Prevention and disable it again, in order for

VirusScan Buffer Overflow Protection to be properly enabled.

13. Issue: Uninstalling VirusScan Enterprise Patches is possible for computers running Windows Installer v3.x

or later. This technology is not fully integrated for Windows 2000 operating systems, so there is no option to

remove the Patch in Add/Remove programs. See instructions under Removing the Patch for removal via

command-line options.

14. Issue: Patches for VirusScan Enterprise 8.7i can only be uninstalled via Add/Remove programs, not via

ePolicy Orchestrator.

Resolved issues

The resolved issues are divided into subsections per patch, showing when each fix was added to the compilation.

Patch 2 resolved issues:

1. Issue: Processes that ended were still listed in Task Manager. (Reference: 482720)

Resolution: The link driver no longer retains the handles to processes that have closed.

2. Issue: On a system using large quantities of handles, particularly busy servers, VirusScan would cache

excessive amounts of data in non-paged pool memory. (Reference: 492541)

Resolution: The link driver has been updated to reduce the amount of overhead in the data used for

operations.

3. Issue: In high I/O environments where Access Protection is enabled, a performance degradation symptom

could be encountered, appearing as a hang. Internal processing by VirusScan drivers occurred serially,

contributing to a bottleneck when large volumes of I/O were filtered. (Reference: 497580)

Resolution: The link and mini-firewall drivers no longer cause a sequential release of objects containing

gathered information on the I/O request. This should increase performance on multi-processor

environments.

4. Issue: The setting in Email Scan for Heuristic network check for suspicious files was not being updated

based on the user interface or policy changes. (Reference: 493594)

Resolution: The setting now updates the proper registry location to reflect the change in the user interface.

5. Issue: To support ePolicy Orchestrator’s Countermeasures functionality, the properties collection was

modified for the new data. The section title was not named correctly to reflect the new functionality.

(Reference: 487603)

Resolution: The section in the computer properties was updated to Countermeasures for ePolicy

Orchestrator to use the data properly.

6. Issue: On systems with Symantec's SVS Client software installed, the on-access scan features did not load.

(Reference: 441670)

Resolution: The On-Access Scanner service now communicates with our filter drivers on systems where

SVS Client software is installed.

7. Issue: The Patch installer registered ScriptScan libraries, even when the user interface had the feature set

as disabled. (Reference: 498347)

Resolution: The Patch installer no longer runs the ScriptScan registration function, in order to prevent the

setting from being changed.

8. Issue: When Access Protection and Buffer Overflow were disabled in an attempt to improve performance,

the drivers were still loaded, although not active, causing little change in performance. (Reference: 465506)

Resolution: Disabling the Access Protection and Buffer Overflow drivers now yields the expected

performance increase.

9. Issue: The on-access scanner did not properly time out when scanning large archives. This could

lead to the

system failing to copy files. (Reference: 464768)

Resolution: The on-access scanner service now successfully times out at the interval specified in the user

interface.

10. Issue: When the on-delivery Outlook scanner received emails to scan, some keyboard entries could be lost.

(Reference: 480992)

Resolution: The Outlook scanner now handles the on-delivery scan of an email with Microsoft Outlook

2007, and caches the keys entered during that time.

11. Issue: When VirusScan Enterprise 8.7i was installed on a system running Windows 2008, uninstall fails.

(Reference: 496609)

Resolution: The Microsoft Patch (MSP) installer corrects a custom action that was preventing the re-

enabling of Microsoft Windows Defender.

12. Issue: When VirusScan Enterprise 8.7i is installed on a system running Windows 2000, where the

installation was customized using McAfee Installation Designer, a subsequent patch update might fail to

install. (Reference: 489712)

Resolution: The MSP installer modifies the cached MSI for VirusScan Enterprise 8.7i, on Windows 2000, in

order to correct the source of failure.

13. Issue: Silent installations might fail on hard drives that are designated as dynamic. The on-access scanner

service fails to start, and the installation rolls back. (Reference: 443669)

Resolution: The Patch 1 Repost and later installation packages now install to a dynamic disk, silently.

Patch 1 resolved issues:

1. Issue: An unauthenticated remote denial-of-service attack was discovered. (Reference: 470184)

Resolution: The product no longer allows the denial-of-service attack.

2. Issue: Under certain conditions, the Lotus Notes scanner of VirusScan Enterprise can mistakenly deny

access to the Lotus Notes internal processes, if a note was being accessed more than once. (Reference:

438541)

Resolution: The Lotus Notes scanner has been adjusted to better handle re-entrance scanning of the same

note.

3. Issue: Silent installs may fail on hard drives that are designated as dynamic. The on-access scanner service

fails to start, and the installation will roll back. (Reference: 443669)

Resolution: The patch 1 and later install packages will now install to a dynamic disk, silently.

4. Issue: Sporadic crashes were seen on multi-processor systems, with the Lotus Notes scanner file

ncdaemon.exe, during startup and general use of Lotus Notes. (Reference: 442337)

Resolution: The Lotus Notes scanner has been corrected to prevent a race condition where different

scanner threads were starting and stopping out of sequence.

5. Issue: A 8E bugcheck (blue screen) sometimes occurred when VirusScan Enterprise 8.7i was installed along

with Checkpoint VPN-1 SecureClient. (Reference: 438771)

Resolution: The link driver was updated to avoid probing kernel memory unnecessarily.

NOTE: For this fix to prevent the above issue, the files need to be placed on the system during the

installation of VirusScan Enterprise, before the services start. The repost of VirusScan Enterprise 8.7i with

Patch 1 will be needed to see the resolution.

6. Issue: A flaw in the caching algorithm sometimes caused files in removable media to not be scanned.

(Reference: 443104)

Resolution: The Anti-Virus Filter driver was updated to clear the cache of removable media upon attaching

to the system.

7. Issue: The on-access scanner contained a flaw in the scan on close logic. This could cause a file to be

queued up for scanning a second time. (Reference: 434475)

Resolution: The Anti-Virus Filter driver no longer queues these unnecessary scan requests.

8. Issue: During an upgrade from a customized VirusScan Enterprise 8.5i to VirusScan Enterprise 8.7i, An

issue sometimes occurred where the configuration tool did not properly backup and restore the registry

information. The installation was left in a state where some of the product information still showed as the

older version. (Reference: 443019)

Resolution: The McAfee Installation Designer configuration applicator has been changed to be more

comprehensive in backing up and in version checking during the upgrade, in order to prevent failures by

other McAfee product installations that require version 8.7i.

NOTE: For this fix to prevent the above issue, the files need to be placed on the system during the

installation of VirusScan Enterprise, before the services start. The repost of VirusScan Enterprise 8.7i with

Patch 1 will be needed to see the resolution.

9. Issue: On Microsoft Windows Vista SP1 or 2008 server, sharing violations could occur when working with

remote files while network drive scanning was enabled. This resulted in being denied access to files, or being

unable to modify or save a file. (Reference: 447282)

Resolution: The Anti-Virus Filter driver has been updated to better handle potential sharing violations that

could occur and avoid conflicts.

10. Issue: Prolonged use of the VirusScan Console was causing delays in loading subsequent loading of the

Console window. (Reference: 456831)

Resolution: The VirusScan Console plug-in was corrected to properly clean up the .tmp files it creates at

load time.

11. Issue: Access Protection rules were being triggered during creation of a VirusScan customized installation

package via McAfee Installation Designer. This could lead to a crash of the McAfee Installation Designer tool.

(Reference: 435728)

Resolution: The VirusScan Email Scan library appropriately handles the new Sensitivity level setting when

it is displayed in the McAfee Installation Designer window.

12. Issue: Certain detections with multiple infections or clean actions were logging the action two times. One

entry was made during the middle of the process, and the other during the final resolution. (Reference:

404787)

Resolution: The Common Shell scanner has been updated to report only the final resolution of the

detection.

13. Issue: A 8E bugcheck (blue screen) might occur during the “Memory for Rootkits” portion of an on-demand

scan. (Reference: 445490)

Resolution: The code analysis driver now uses a more robust method of querying the system for driver

object data.

14. Issue: Access Protection block rules that were created for USB devices sometimes did not handle removing

and reinserting the device multiple times. (Reference: 457415)

Resolution: The Access Protection, Anti-Virus Filter, and Link drivers have been updated to better handle

reinserting the device.

15. Issue: The on-access scanner was not properly utilizing the Scan files opened for Backup option.

(Reference: 457416)

Resolution: The Anti-Virus Filter driver has been rectified to properly interpret the flag being sent from the

on-access scanner.

16. Issue: In an ePolicy Orchestrator managed environment, the agent’s Collect and Send Properties function

could cause the McAfee Product Manager service to spike its CPU utilization for extended periods of time.

(Reference: 457421)

Resolution: The VirusScan Management Plug-in has been updated to call for the scan engine and DAT files

via a new API call, rather than initializing the engine to retrieve the information. This lessens the CPU time

involved during the agent Collect and Send Properties function.

17. Issue: With certain Access Protection rules enabled, VirusScan Enterprise was failing to return information

to the Checkpoint SecureClient software. (Reference: 444667)

Resolution: The binaries for Checkpoint integration have been updated to properly request information

from VirusScan Enterprise.

18. Issue: Attempting to start an on-demand scan via the VirusScan tray icon could result in an error on

Microsoft Windows Vista. (Reference: 446950)

Resolution: The VirusScan tray icon correctly calls the on-demand scanner on User Access Controlled

operating systems.

19. Issue: Creating a McAfee Installation Designer change package for VirusScan Enterprise and the

AntiSpyware Enterprise Module, sometimes failed to upgrade the evaluations to licensed versions, for both

products. (Reference: 437509)

Resolution: McAfee Installation Designer configuration applicator upgrades the licenses of VirusScan

Enterprise and the AntiSpyware Enterprise Module when they are both evaluations.

20. Issue: The VirusScan Console On-Delivery Email Scanner entry was not worded correctly in German.

(Reference: 438931)

Resolution: The VirusScan Resource file updates the displayed text to the correct wording in German.

21. Issue: One of the ScriptScan “McLogEvent” entries was always recorded in English. (Reference: 431071)

Resolution: The Announcer library was updated to remove the extra notification.

22. Issue: In some cases, VirusScan Enterprise was not properly displaying Patch information about itself and

currently installed VirusScan Modules*. (Reference: 456826)

Resolution: The VirusScan Management Plug-in has been updated to gather the current information about

Patch levels of its installed VirusScan Modules*.

23. Issue: When there were HotFixes or Patches available for the VirusScan Modules*, they were not being

downloaded to the clients. (Reference: 445494)

Resolution: The AutoUpdate binary was modified to check for the existence of the VirusScan Module*

licenses when deciding which HotFixes or Patches to install.

24. Issue: Script errors were seen when attempting to view the Japanese text, of the product description

window, in ePolicy Orchestrator 3.6.x. (Reference: 434203)

Resolution: The VirusScan 8.7i NAP file has been updated to display the Japanese page in its proper

Unicode format (UTF-8).

25. Issue: The alert options for Network Appliance Filer and ICAP scanners were visible on the workstation

ePolicy Orchestrator policies. (Reference: 448361)

Resolution: The VirusScan 8.7i NAP and extension have been updated to remove the alert options for alert

options for Network Appliance Filer and ICAP scanners, from the workstation policy, as those scanners are

server specific.

26. Issue: Some ePolicy Orchestrator operational events were not being generated for the VirusScan Modules*.

(Reference: 434423)

Resolution: The VirusScan Reports extension updates the current VirusScan Enterprise Event IDs (1329 –

1339) to be used for the VirusScan Modules*.

27. Issue: The on-demand scan log file validation checked for invalid file characters, including the "<" and ">"

characters. (Reference: 433776)

Resolution: The VirusScan 8.7i extension validation for the path name of the on-demand scanner log file

now allows the "<" and ">" characters, which are needed for ePolicy Orchestrator macro variables.

28. Issue: The alert options for the VirusScan Modules* would not gray out when inheritance was enforced on

the parent policy. (Reference: 434231)

Resolution: The VirusScan 8.7i NAP now properly enforces inheritance on the VirusScan Module alert

options.

29. Issue: Events generated by the VirusScan Enterprise for Offline Virtual Images 1.0 software were not being

generated in ePO reports. (Reference: 439832)

Resolution: The McAfee Announcer library changed properties of the events to support current reporting in

ePolicy Orchestrator 3.6.1.

30. Issue: Scanning events generated by VirusScan Enterprise 8.7i were not populating the Task Name with

proper information. (Reference: 453515)

Resolution: The McAfee Announcer library now populates the Task Name with the scanner that generated

the event.

31. Issue: The Access Protection includes and exclude fields permitted a limited number of characters in the

extension interface. (Reference: 457418/457419)

Resolution: The VirusScan 8.7i extension updates the maximum limit of the include and exclude fields, to

be consistent with the point-product interface.

32. Issue: Scanner exclusions that were entered in ePolicy Orchestrator with a preceding blank space did not

show up correctly when they were enforced on the client. (Reference: 457420)

Resolution: The VirusScan 8.5i extension has been updated to strip any preceding blank spaces from

exclusions when they are entered in ePolicy Orchestrator.

33. Issue: VirusScan Enterprise added some

new events that were not included in the default event filter, which

was provided by ePolicy Orchestrator. (Reference: 462927)

Resolution: The VirusScan Reports extension updates the current list to allow filtering of these events.

Patch Inventory

This release consists of a package called VSE87P2.zip, which contains the following files:

The following files are new with this Patch release:

Filename Description

DEFERRED.MFE MSI deferred action file

PKGCATALOG.Z Package catalog file

PATCH2.HTM This text file

VSE870DET.MCS ePolicy Orchestrator detection script for VirusScan Enterprise

SETUP.EXE Installer for this release

SETUP.INI Initialization file for SETUP.EXE

PATCH2.MSP Microsoft Installer Patch file

VSE870.NAP ePolicy Orchestrator 3.6.x NAP for VirusScan Enterprise

VIRUSCAN8700.ZIP ePolicy Orchestrator 4.x extension for VirusScan Enterprise

VIRUSCANREPORTS.ZIP ePolicy Orchestrator 4.x Reports for VirusScan Enterprise

Filename Version

LOGPARSER.EXE 1.2.0.136

MIDUTIL.DLL 8.7.0.133

FTCFG.DLL 8.7.0.659

MCUPDATE.EXE 8.7.0.659

NAIANN.DLL 8.7.0.659

NCDAEMON.EXE 8.7.0.659

NCEXTMGR.EXE 8.7.0.659

NCINSTALL.EXE 8.7.0.659

NCMENU.EXE 8.7.0.659

NCSCAN.EXE 8.7.0.659

NCTRACE.EXE 8.7.0.659

QUARCPL.DLL 8.7.0.659

SCAN32.EXE 8.7.0.659

SCAN64.EXE 8.7.0.659

SHCFG32.EXE 8.7.0.659

VSUPDATE.DLL 8.7.0.659

BBCPL.DLL 8.7.0.747

COPTCPL.DLL 8.7.0.747

EMCFGCPL.DLL 8.7.0.747

MCAVDETECT.DLL 8.7.0.747

SCNCFG32.EXE 8.7.0.747

SHUTIL.DLL 8.7.0.747

VSODSCPL.DLL 8.7.0.747

VSPLUGIN.DLL 8.7.0.747

VSUPDCPL.DLL 8.7.0.747

SHSTAT.DLL 8.7.0.767

SHSTAT.EXE 8.7.0.767

VSTSKMGR.EXE 8.7.0.767

ADSLOKUU.DLL 14.1.0.515

CSSCAN.EXE 14.1.0.515

ENGINESERVER.EXE 14.1.0.515

ENTVUTIL.EXE 14.1.0.515

FTL.DLL 14.1.0.515

LOCKDOWN.DLL 14.1.0.515

MCSHIELD.DLL 14.1.0.515

MCSHIELD.EXE 14.1.0.515

MCSHIELDPERFDATA.DLL 14.1.0.515

MCVSSNMP.DLL 14.1.0.515

MFEANN.EXE 14.1.0.515

MYTILUS3.DLL 14.1.0.515

MYTILUS3_SERVER.DLL 14.1.0.515

MYTILUS3_SERVER_PROCESS.EXE 14.1.0.515

MYTILUS3_WORKER.DLL 14.1.0.515

NAEVENT.DLL 14.1.0.515

NAIEVENT.DLL 14.1.0.515

OTLKSCAN.DLL 14.1.0.515

OTLKUI.DLL 14.1.0.515

SCRIPTFF.DLL 14.1.0.515

SCRIPTSN.DLL 14.1.0.515

MFEAPFA.DLL 14.1.0.614

MFEAPFK.SYS 14.1.0.614

MFEAVFA.DLL 14.1.0.614

MFEAVFK.SYS 14.1.0.614

MFEBOPK.SYS 14.1.0.614

MFEHIDA.DLL 14.1.0.614

Installation Instructions

zTo use this release, you must have VirusScan Enterprise 8.7i software installed on the computer you intend

to update with this release.

zThis release does not work with earlier versions of VirusScan software.

zA reboot is needed to fully load the system drivers into memory. The package installation does not force the

reboot.

Installation steps

1. Extract the Patch files from VSE87P2.zip to a temporary folder on your hard drive.

2. Double-click the file SETUP.EXE inside the temporary folder created in Step 1.

3. Follow the instructions of the installation wizard.

Installation steps via ePolicy Orchestrator 3.6.x

1. On the computer where the ePolicy Orchestrator 3.x console resides, extract the Patch files and folders from

VSE87P2.zip to a temporary folder on your hard drive.

2. Open the ePolicy Orchestrator 3.x console and add the package from the temporary folder created in Step 1

to your repository.

NOTE: Refer to Checking in Package in the ePolicy Orchestrator 3.x online Help, or Checking in

PKGCATALOG.Z product packages to the master repository in the ePolicy Orchestrator 3.6 online Help, for

instructions on adding a package to the repository. The package type for this Patch is “Products or Updates.”

3. The next time an agent update task runs, the VirusScan Enterprise client automatically downloads and

installs the Patch.

4. In the ePolicy Orchestrator console, add the VSE870.NAP file using the Check in NAP wizard.

NOTE: There is no new VSE870Reports.NAP with this Patch.

Installation steps via ePolicy Orchestrator 4.x

1. On the computer where the ePolicy Orchestrator 4.x console resides, place the Patch archive VSE87P2.zip in

a temporary folder on your hard drive.

2. Open the ePolicy Orchestrator 4.x console and add the VSE87P1.zip package from the temporary folder

created in Step 1 to your repository.

NOTE: Refer to Checking in Packages Manually in the ePolicy Orchestrator 4.x online Help, for instructions

on adding a package to the repository. The package type for this Patch is “Products or Updates (.ZIP).”

3. The next time an agent update task runs, the VirusScan Enterprise client automatically downloads and

installs the Patch.

4. From the top menu of the ePolicy Orchestrator console, click "Configuration."

5. From the menu tabs, click Extensions, then click Install Extensions in the lower left of the window.

6. Click Browse and locate the VIRUSCAN8700.zip extension update from the temporary folder created in Step

7. Click OK to begin the extension update.

8. Repeat the checkin process for the VIRUSCANREPORTS.zip reports extension

NOTE: Once the extensions are updated, the version can be verified in the ePolicy Orchestrator Extensions

list (see About this release for version information).

MFEHIDIN.EXE 14.1.0.614

MFEHIDK.SYS 14.1.0.614

MFERKDA.DLL 14.1.0.614

MFERKDET.SYS 14.1.0.614

MFETDIK.SYS 14.1.0.614

MFEVTPA.DLL 14.1.0.614

MFEVTPS.EXE 14.1.0.614

VSCAN.BOF 422

STRINGS.BIN N/A

VSEVNTUI.DLL N/A

VIRUSCAN8700.ZIP 8.7.0.170

VIRUSCANREPORTS.ZIP 1.1.0.145

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de McAfee

McAfee

McAfee VIRUSSCAN 5.1 Manual de usuario

McAfee

McAfee VSF09EMB1RAA - VirusScan Plus 2009 Manual de usuario

McAfee

McAfee VIRUSSCAN ENTERPRISE 8.7I PATCH 3 - S... Manual de instrucciones

McAfee

McAfee VIRUSSCAN 5.1 Manual de servicio

McAfee

McAfee AVM85M - VirusScan For Mac Manual de usuario

McAfee

McAfee VIRUSSCAN ENTERPRISE 8.7I PATCH 1 - S... Manual de instrucciones

McAfee

McAfee EBCACE-AA-HA - E-Business Client - PC Manual de usuario

McAfee

McAfee ENDPOINT ENCRYPTION ENTERPRISE - BEST PRACTICES... Manual de usuario

McAfee

McAfee VIRUSSCAN PLUS 2009 Manual de usuario

McAfee

McAfee GSSCDE-AA-DA - GroupShield Security Suite Manual de usuario

McAfee

McAfee PSMCDE-AB-AA - PortalShield For Microsoft SharePoint Server External Connection... Manual de usuario

McAfee

McAfee EPOLICY ORCHESTRATOR 4.5 - Manual de usuario

McAfee

McAfee EPOLICY ORCHESTRATOR 4.5 RELEA Manual de instrucciones

McAfee

McAfee MANAGEMENT EDITION 2.5 Manual de usuario

McAfee

McAfee AVDCDE-AA-AA - Active Virus Defense Suite Manual de usuario

McAfee

McAfee SMB EDITIONS Manual de usuario

McAfee

McAfee QUICKCLEAN 1.0 Manual de usuario

McAfee

McAfee FOUNDSTONE ON-DEMAND Manual de usuario

McAfee

McAfee Agent 4.0 Manual de instrucciones

McAfee

McAfee VIRUSSCAN 8.7I Manual de instrucciones

McAfee

McAfee STUDENT SURVIVAL KIT 1.0-GETTING STARTED Manual de usuario

McAfee

McAfee EPOLICY ORCHESTRATOR 4.5 - Manual de usuario

McAfee

McAfee INTERNET SECURITY 2008 Manual de usuario

McAfee

McAfee INTERNET GUARD DOG 3.0 Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario