Maxtor Quickview 40 Manual de usuario
Quickview 40 20/30/40GB AT
Product Manual
May 24, 2005
Part Number: 000001925
May 24, 2005 Maxtor Corporation. All rights reserved. Printed in U.S.A.This publication
could include technical inaccuracies or typographical errors. Changes are periodically made
to the information herein – which will be incorporated in revised editions of the publication. Maxtor may
make changes or improvements in the product(s) described in this publication at any time and without
notice.
UL/CSA/VDE/TUV/RoHS
UL standard 1954 recognition granted under File No. E78016
CSA standard C22.2-950 certification granted under File No. LR49896
TUV Rheinland EN 60 950
Tested to FCC Rules for Radiated and Conducted Emissions, Part 15, Sub Part J, for Class-B Equipment.
Quickview 40 model numbers 6K020/030/040L0 meet the EU directive for the Restriction and Use of
Hazardous Substances (RoHS), 2002/95/EC of the European Parliament and the council of 27 January,
2003.
PATENTS
These products are covered by or licensed under one or more of the following U.S. Patents:
4,419,701; 4, 538,193 4,625,109; 4,639,798; 4,647,769; 4,647,997; 4,661,696; 4,669,004; 4,675,652;
4,703,176; 4,730,321; 4,772,974; 4,783,705; 4,819,153; 4,882,671; 4,920,442; 4,920,434; 4,982,296;
5,005,089; 5,027,241; 5,031,061; 5,084,791; 5,119,254; 5,160,865; 5,170,229; 5,177,771; Other U.S. and
Foreign Patents Pending.
Maxtor®, MaxFax®are registered trademarks of Maxtor Corporation, registered in the U.S.A. and other
countries. Quickview 40, AutoTransfer, AutoRead, AutoWrite, DisCache, DiskWare, Defect Free Inter-
face, and WriteCache are trademarks of Maxtor Corporation. All other brand names or trademarks are the
property of their manufacturers.
Maxtor reserves the right to make changes and improvements to its products, without incurring any obliga-
tion to incorporate such changes or improvements into units previously sold or shipped.
This product or document is protected by copyright and distributed under licences restricting its use, copy-
ing, distributing, and decompilation. No part of this product or document may be reproduced in any form
by any means without prior written authorization of Maxtor and its licensors, if any.
RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government is subject to
restrictions as set forth in subparagraphs (c)(1)(ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013 and FAR 52.227-19.
THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTIULAR PURPOSE, OR NON-INFRINGE-
MENT.
You can download Maxtor publications directly from Maxtor at, www.maxtor.com
Part Number: 000001925
Before You Begin: Thank you for your interest in Maxtor hard disk drives. This manual provides technical
information for OEM engineers and systems integrators regarding the installation and use of Maxtor hard
drives. Drive repair should be performed only at an authorized repair center. For repair information, contact
the Maxtor Product Support Center at 1-800-2MAXTOR.
CAUTION: Maxtor hard drives are precision products. Failure to follow these precautions and guidelines
outlined here may lead to product failure, damage and invalidation of all warranties.
1BEFORE unpacking or handling a drive, take all proper electrostatic discharge (ESD) precau-
tions, including personnel and equipment grounding. Stand-alone drives are sensitive to
1 electrostatic discharge (ESD) damage.
2BEFORE removing drives from their packing material, allow them to reach room temperature.
3 During handling, NEVER drop, jar, or bump a drive.
4 Once a drive is removed from the Maxtor shipping container, IMMEDIATELY secure the
drive through its mounting holes within a chassis. Otherwise, store the drive on a padded,
grounded, antistatic surface.
5NEVER switch DC power onto the drive by plugging an electrically live DC source cable into
the drive's connector. NEVER connect a live bus to the drive's interface connector.
6ELECTRICAL GROUNDING - For proper operation, the drive must be securely fastened to
a device bay that provides a suitable electrical ground to the drive baseplate.
Please do not remove or cover up Maxtor factory-installed drive labels. They contain information required
should the drive ever need repair.Thank you for your interest in Maxtor hard disk drives. This manual pro-
vides technical information for OEM engineers and systems integrators regarding the installation and use of
Maxtor hard drives. Drive repair should be performed only at an authorized repair center. For repair infor-
mation, contact the Maxtor Customer Service Center at 800-2MAXTOR or 1-303-678-2015.
Corporate Headquarters:
500 McCarthy Blvd.
Milpitas, California 95035
Tel: 408-894-5000
Fax: 408-362-4740
Quickview 40 20/30/40GB AT i
Table of Content
Chapter 1
INTRODUCTION
1.1 MAXTOR CORPORATION................................................................. 1-1
1.2 AUDIENCE ..................................................................................... 1-1
1.3 MANUAL ORGANIZATION.................................................................1-2
1.4 TERMINOLOGY AND CONVENTIONS................................................. 1-2
1.5 REFERENCES.................................................................................. 1-4
Chapter 2
PRODUCT DESCRIPTION
2.1 PRODUCT DESCRIPTION.................................................................. 2-1
2.2 KEY FEATURES .............................................................................. 2-1
2.3 REGULATORY COMPLIANCE STANDARDS ........................................ 2-3
2.4 HARDWARE REQUIREMENTS ........................................................... 2-3
Chapter 3
PRODUCT SPECIFICATIONS
3.1 MODELS AND CAPACITIES.............................................................. 3-1
3.2 DRIVE CONFIGURATION .................................................................. 3-1
3.3 PERFORMANCE SPECIFICATIONS ..................................................... 3-2
3.4 PHYSICAL DIMENSIONS .................................................................. 3-2
3.5 POWER REQUIREMENTS.................................................................. 3-3
3.6 POWER MODE DEFINITIONS ............................................................ 3-3
3.7 EPA ENERGY STAR COMPLIANCE .................................................... 3-3
3.8 ENVIRONMENTAL LIMITS ................................................................ 3-4
3.9 SHOCK AND VIBRATION ................................................................. 3-5
3.10 RELIABILITY SPECIFICATIONS......................................................... 3-6
3.11 EMC/EMI ...................................................................................... 3-7
3.11.1 RADIATED ELECTROMAGNETIC FIELD EMISSIONS - EMC COMPLI-
ANCE......................................................................................3-7
3.11.2 CANADIAN EMISSIONS STATEMENT .......................................3-7
3.12 SAFETY REGULATORY COMPLIANCE .............................................. 3-7
3.13 RoHS COMPLIANCE ........................................................................3-7
Table of Contents
ii Quickview 40 20/30/40GB AT
Chapter 4
INSTALLATION
4.1 SPACE REQUIREMENTS................................................................... 4-1
4.2 UNPACKING INSTRUCTIONS............................................................ 4-2
4.3 HARDWARE OPTIONS ..................................................................... 4-5
4.3.1 CABLE SELECT (CS) JUMPER ....................................................4-6
4.3.2 DRIVE SELECT (DS) JUMPER ....................................................4-7
4.3.3 MASTER JUMPER CONFIGURATION ..........................................4-7
4.3.4 JUMPER PARKING (PK) POSITION .............................................4-7
4.3.5 ALTERNATE CAPACITY (AC) ....................................................4-8
4.4 ATA BUS ADAPTER ........................................................................ 4-9
4.4.1 40-PIN ATA BUS CONNECTOR ..................................................4-9
4.4.2 ADAPTER BOARD ....................................................................4-9
4.5 MOUNTING .................................................................................. 4-10
4.5.1 ORIENTATION .......................................................................4-10
4.5.2 CLEARANCE .........................................................................4-12
4.5.3 VENTILATION ........................................................................4-12
4.6 COMBINATION CONNECTOR (J1)................................................... 4-12
4.6.1 DC POWER (J1, SECTION A) ...................................................4-13
4.6.2 EXTERNAL DRIVE ACTIVITY LED .............................................4-13
4.6.3 ATA BUS INTERFACE CONNECTOR (J1, SECTION C) ................4-13
4.7 FOR SYSTEMS WITH A MOTHERBOARD ATA ADAPTER................... 4-14
4.8 FOR SYSTEMS WITH AN ATA ADAPTER BOARD ............................. 4-14
4.8.1 ADAPTER BOARD INSTALLATION ...........................................4-14
4.9 TECHNIQUES IN DRIVE CONFIGURATION........................................ 4-17
4.9.1 THE 528-MEGABYTES BARRIER ..............................................4-17
4.9.2 THE 8.4-GIGABYTES BARRIER ................................................4-17
4.9.3 OPERATING SYSTEM LIMITATIONS .........................................4-18
4.10 SYSTEM STARTUP AND OPERATION ............................................ 4-18
Chapter 5
ATA BUS INTERFACE AND ATA COMMANDS
5.1 INTRODUCTION.............................................................................. 5-1
5.2 MECHANICAL INTERFACE ............................................................... 5-1
5.2.1 SIGNAL CABLE AND CONNECTOR .............................................5-1
5.3 ELECTRICAL INTERFACE ................................................................. 5-1
5.3.1 ATA BUS INTERFACE ...............................................................5-1
5.4 REGISTER ADDRESS DECODING ...................................................... 5-2
5.5 COMMAND INTERFACE................................................................... 5-2
5.5.1 GENERAL FEATURE SET ...........................................................5-2
5.5.2 SUPPORTED COMMANDS ........................................................5-2
Table of Contents
Quickview 40 20/30/40GB AT iii
Chapter 6
SERVICE AND SUPPORT
6.1 PRODUCT SUPPORT/TECHNICAL ASSISTANCE/CUSTOMER SERVICE. 6-1
Glossary................................................................................................G-1
Quickview 40 20/30/40GB AT iii
List of Figures
Figure 4-1 Mechanical Dimensions...........................................................4-1
Figure 4-2 Single-Pack Shipping Container ..............................................4-3
Figure 4-3 25-Pack Shipping Container ...................................................4-4
Figure 4-4 Jumper Locations on the Interface Connector ..........................4-5
Figure 4-5 AT Connector and Jumper Location ........................................4-8
Figure 4-6 Mounting Screw Clearance .....................................................4-9
Figure 4-7 Mounting Dimensions ......................................................... 4-10
Figure 4-8 J1 DC Power and ATA Bus Combination Connector ................4-11
Figure 4-9 Drive Power Supply and ATA Bus Interface Cables ................. 4-14
Figure 4-10 Completing the Drive Installation ..........................................4-15
Quickview 40 20/30/40GB AT iv
List of Tables
Table 4-1 AT Jumper Option.........................................................................4-6
Table 4-2 J1 Power Connector, Section A......................................................4-12
Table 4-3 Logical Addressing Form.................................................................4-19
Table 5-1 Supported Commands.................................................................... 5-2
Table 5-2 Identify Drive Command Parameters.....................................................5-
5
Quickview 40 20/30/40GB AT 1-1
Chapter 1
Introduction
1.1 Maxtor Corporation
Maxtor corporation is one of the world’s largest suppliers of hard disk
drive products-products that help store the digital world for millions of
users. Maxtor products serve a range of markets, including personal and
entertainment, small office/home office, mid-sized business and
enterprise
Products
Maxtor storage products include drives and accessories for PC’s,
workstations, RAID products, enterprise applications, enterprise servers,
high-end systems, consumer electronics and personal storage.
Support
Maxtor provides a variety of consumer support options, all designed to
make sure the user gets fast, helpful, accurate information to help resolve
any difficulties. These options include a broad, searchable knowledge
base of FAQ’s, product manuals, installation guides, information on
previously resolved problems, software downloads, and contact by
phone or E-mail with a support person. For more information, visit
www.maxtor.com/en/support.
1.2 Audience
The Quickview 40 20/30/40GB AT product manual is intended for
several audiences. These audiences include: the end user, installer,
developer, consumer electronics original equipment manufacturer
(CE,OEM), and distributor. The manual provides information about
installation, principles of operation, interface command implementation,
and maintenance.
Tabla de contenidos
Otros manuales de Almacenamiento de Maxtor
Maxtor
Maxtor ATLAS 10K III Manual de usuario
Maxtor
Maxtor D540X-4K Manual de usuario
Maxtor
Maxtor ATLAS 10K IV Manual de usuario
Maxtor
Maxtor BlackArmor Manual de usuario
Maxtor
Maxtor Basics STM302503EHM301-RK Manual de usuario
Maxtor
Maxtor DiamondMax VL 17 Manual de usuario
Maxtor
Maxtor STM31000528AS Manual de usuario
Maxtor
Maxtor OneTouch 4 Plus Manual de usuario
Maxtor
Maxtor DiamondMax 21 Manual de usuario
Maxtor
Maxtor Personal Storage 5000XT Manual de usuario
Maxtor
Maxtor OneTouch 4 Plus Manual de usuario
Maxtor
Maxtor Computer Drive Manual de usuario
Maxtor
Maxtor MobileMax Manual de usuario
Maxtor
Maxtor MaXLine III 7B250S0 Instrucciones de uso
Maxtor
Maxtor Personal Storage 5000DV Manual de instrucciones
Maxtor
Maxtor QUICKVIEW EXPANDER Manual de usuario
Maxtor
Maxtor 6E040L0 Manual de usuario
Maxtor
Maxtor Personal Storage 3100 Manual de usuario
Maxtor
Maxtor Maxtor OneTouch USB Manual de usuario
Maxtor
Maxtor DiamondMax10 80 Guía
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario