Maxtor MaXLine II 300GB Manual de usuario
Maxtor MaXLine II 250/300GB
Product Manual
January 2, 2004
Part Number: 1904
©January 2, 2004 Maxtor Corporation. All rights reserved. Printed in U.S.A.
This publication could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein – which will be incorporated in revised editions
of the publication. Maxtor may make changes or improvements in the product(s) described
in this publication at any time and without notice.
Maxtor®and MaxFax®are registered trademarks of Maxtor Corporation, registered in the
U.S.A. and other countries. Maxtor MaXLine II 250/300GB, AutoTransfer, AutoRead,
AutoWrite, DisCache, DiskWare, Defect Free Interface, and WriteCache are trademarks of
Maxtor Corporation. All other brand names or trademarks are the property of their manufac-
turers.
Maxtor reserves the right to make changes and improvements to its products, without
incurring any obligation to incorporate such changes or improvements into units previously
sold or shipped.
This product or document is protected by copyright and distributed under licences restrict-
ing its use, copying, distributing, and decompilation. No part of this product or document
may be reproduced in any form by any means without prior written authorization of Maxtor
and its licensors, if any.
RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government is subject
to restrictions as set forth in subparagraphs (c)(1)(ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013 and FAR 52.227-19.
THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTIULAR PURPOSE, OR NON-INFRINGEMENT.
You can request Maxtor publications from your Maxtor Sales Representative or order them
directly from Maxtor.
Publication Number: Part Number: 1904
Before You Begin
Thank you for your interest in Maxtor hard disk drives. This manual provides technical infor-
mation for OEM engineers and systems integrators regarding the installation and use of
Maxtor hard drives. Drive repair should be performed only at an authorized repair center. For
repair information, contact the Maxtor Product Support Center at 1-800-2MAXTOR.
CAUTION: Maxtor hard drives are precision products. Failure to follow these precautions
and guidelines outlined here may lead to product failure, damage and invalidation
of all warranties.
1BEFORE unpacking or handling a drive, take all proper electro-static discharge
(ESD) precautions, including personnel and equipment grounding. Stand-alone
drives are sensitive to ESD damage.
2BEFORE removing drives from their packing material, allow them to reach room
temperature.
3 During handling, NEVER drop, jar, or bump a drive.
4 Once a drive is removed from the Maxtor shipping container, IMMEDIATELY
secure the drive through its mounting holes within a chassis. Otherwise, store
the drive on a padded, grounded, antistatic surface.
5NEVER switch DC power onto the drive by plugging an electrically live DC source
cable into the drive's connector. NEVER connect a live bus to the drive's inter-
face connector.
6ELECTRICAL GROUNDING - For proper operation, the drive must be securely fas-
tened to a device bay that provides a suitable electrical ground to the drive base-
plate.
Please do not remove or cover up Maxtor factory-installed drive labels. They contain infor-
mation required should the drive ever need repair.Thank you for your interest in Maxtor hard
disk drives. This manual provides technical information for OEM engineers and systems inte-
grators regarding the installation and use of Maxtor hard drives. Drive repair should be per-
formed only at an authorized repair center. For repair information, contact the Maxtor
Customer Service Center at 800-2MAXTOR or 1-303-678-2015.
Corporate Headquarters:
500 McCarthy Blvd.
Milpitas, California 95035
Tel: 408-894-5000
Fax: 408-362-4740
Table of Contents
Maxtor MaXLine II 250/300GB i
Table of Contents
Chapter 1
INTRODUCTION 1
1.1 Maxtor Corporation ......................................................................... 1-1
1.2 Manual Organization ........................................................................ 1-1
1.3 Abbreviations ................................................................................. 1-2
1.4 Conventions ................................................................................... 1-2
Chapter 2
PRODUCT DESCRIPTION
2.1 Product Description ......................................................................... 2-1
2.2 Key Features .................................................................................. 2-1
2.3 Product Features ............................................................................. 2-2
2.4 Cache Management......................................................................... 2-4
2.5 Major HDA Components................................................................... 2-5
2.6 Subsystem Configuration ................................................................. 2-6
2.7 Cylinder Limitation Jumper Description .............................................. 2-7
Chapter 3
PRODUCT SPECIFICATIONS
3.1 Models and Capacities ..................................................................... 3-1
3.2 Drive Configuration.......................................................................... 3-2
3.3 Performance Specifications............................................................... 3-3
3.4 Physical Dimensions ........................................................................ 3-3
3.5 Power Requirements........................................................................ 3-5
3.6 Power Mode Definitions ................................................................... 3-5
3.7 EPA Energy Star Compliance ............................................................ 3-5
3.8 Environmental Limits........................................................................ 3-6
3.9 Shock and Vibration (TBD) ............................................................... 3-7
3.10 Reliability Specifications.................................................................. 3-8
3.11 EMC/EMI ...................................................................................... 3-9
3.11.1 Radiated Electromagnetic Field Emissions - EMC Compliance .......3-9
3.11.2 Canadian Emissions Statement ................................................3-9
3.12 Safety Regulatory Compliance ......................................................... 3-9
Table of Contents
Maxtor MaXLine II 250/300GB ii
Chapter 4
HANDLING AND INSTALLATION
4.1 Hard Drive Handling Precautions ....................................................... 4-1
4.2 Electro-Static Discharge (ESD) .......................................................... 4-1
4.3 Unpacking and Inspection................................................................. 4-2
4.4 Repacking ...................................................................................... 4-5
4.5 Physical Installation ......................................................................... 4-5
Chapter 5
ATA BUS INTERFACE AND ATA COMMANDS
5.1 INTRODUCTION.............................................................................. 5-1
5.2 MECHANICAL INTERFACE ............................................................... 5-1
5.2.1 Signal Cable and Connector .......................................................5-1
5.3 ELECTRICAL INTERFACE ................................................................. 5-1
5.3.1 ATA Bus Interface ....................................................................5-1
5.4 REGISTER ADDRESS DECODING....................................................... 5-2
5.5 COMMAND INTERFACE ................................................................... 5-2
5.5.1 General Feature Set ..................................................................5-2
5.5.2 Supported Commands ..............................................................5-2
Chapter 6
SERVICE AND SUPPORT
6.1 Product Support/Technical Assistance/Customer Service...................... 6-1
Appendix A
BREAKING THE 137 GIGABYTE STORAGE BARRIER
A.1 Breaking the 137 Gigabyte Storage Barrier ........................................ A-1
A.1.1 History .................................................................................. A-1
A.1.2 Solving the 137 Gigabyte Capacity Barrier ................................. A-3
A.1.3 How is the Extension Implemented? .......................................... A-3
A.1.4 What Do the Drives Need to Meet the Spec? .............................. A-3
A.1.5 What Else is Involved? ............................................................. A-3
A.1.6 What is the Next Barrier? ......................................................... A-4
vii Maxtor MaXLine II 250/300GB
List of Figures
Figure 2-1 PCBA Jumper Location and Configuration ................................................... 2-7
Figure 3-1 Outline and Mounting Dimensions .............................................................. 3-4
Figure 4-1 Single Pack Shipping Container .................................................................... 4-3
Figure 4-2 20 Pack Shipping Container .......................................................................... 4-4
Maxtor MaXLine II 250/300GB 1-1
Chapter 1
INTRODUCTION
1.1 Maxtor Corporation
Maxtor Corporation has been providing high-quality computer storage
products since 1982. Along the way, we’ve seen many changes in data
storage needs. Not long ago, only a handful of specific users needed more
than a couple hundred megabytes of storage. Today, downloading from
the Internet and CD-ROMs, multimedia, networking and advanced office
applications are driving storage needs even higher. Even home PC
applications need capacities measured in gigabytes, not megabytes.
Support
Maxtor provides a variety of customer support options, all designed to
make sure the user gets fast, helpful, accurate information to help resolve
any difficulties. These options include a broad, searchable knowledge
base of FAQ’s, product manuals, installation guides, information on
previously resolved problems, software downloads, and contact by
phone or E-mail with a support person. For more information, visit
www.maxtor.com/en/support
1.2 Manual Organization
This hard disk drive reference manual is organized in the following
method:
Chapter 1–Introduction
Chapter 2–Product Description
Chapter 3–Product Specifications
Chapter 4–Handling and Installation
Chapter 5–ATA Bus Interface and ATA Commands
Chapter 6–Service and Support
Appendix A–Breaking the 137GB Storage Barrier
Introduction
Maxtor MaXLine II 250/300GB 1-2
1.3 Abbreviations
1.4 Conventions
If there is a conflict between text and tables, the table shall be accepted
as being correct.
Key Words
The names of abbreviations, commands, fields and acronyms used as
signal names are in all uppercase type (e.g., IDENTIFY DRIVE). Fields
containing only one bit are usually referred to as the “name” bit instead
of the “name” field.
Names of drive registers begin with a capital letter (e.g., Cylinder High
register).
Abbreviation Description Abbreviation Description
ATA AT attachment MB megabyte
bpi bits per inch Mbits/sec megabits per second
CHS cylinder - head - sector MB/sec megabytes per second
db decibels MHz megahertz
DA double amplitude
(represents pk-pk shaker
displacement)
ms millisecond
dBA decibels, A weighted MSB most significant bit
DMA direct memory access mV millivolts
ECC error correction code ns nanoseconds
fci flux changes per inch PIO programmed input/output
G acceleration RPM revolutions per minute
GB gigabyte tpi tracks per inch
Hz hertz UDMA ultra direct memory
access
KB kilobyte µsec microsecond
LBA logical block address(ing) V volts
LSB least significant bit W watts
mA milliamperes
Introduction
Maxtor MaXLine II 250/300GB 1-3
Numbering
Numbers that are not followed by a lowercase “b” or “h” are decimal
values. Numbers that are followed by a lowercase “b” (e.g., 01b) are
binary values. Numbers that are followed by a lowercase “h” (e.g., 3Ah)
are hexadecimal values.
Signal Conventions
Signal names are shown in all uppercase type.
All signals are either high active or low active signals. A dash character
(-) at the end of a signal name indicates that the signal is low active. A
low active signal is true when it is below ViL and is false when it is
above ViH. A signal without a dash at the end indicates that the signal is
high active. A high active signal is true when it is above ViH and is false
when it is below ViL.
When a signal is asserted, it means the signal is driven by an active cir-
cuit to its true state.
When a signal is negated, it means the signal is driven by an active cir-
cuit to its false state.
When a signal is released, it means the signal is not actively driven to any
state. Some signals have bias circuitry that pull the signal to either a true
or false state when no signal driver is actively asserting or negating.
.
Maxtor MaXLine II 250/300GB 2-1
Chapter 2
PRODUCT DESCRIPTION
2.1 Product Overview
MaXLine II hard disk drive is part of a family of highly durable, 1-inch-
high hard disk drives manufactured to meet the highest product quality
standards. These hard drives use non-removable, 3 1/2-inch hard disks
and are available with ATA interfaces.
Maxtor has combined leading edge technologies with the largest ATA
drive storage capacity available today to create the highly durable
MaXLine II hard disk drive. Innovative features and design make it
ideally suited for applications requiring large storage capacity.
2.2 Key Features
• ANSI ATA-5/6 compliant PIO Mode 4 interface (Enhanced
IDE)
• Supports ATA-6 UltraDMA Mode 5 (100 MBytes/sec) and
Maxtor Ultra ATA/133 MBytes/second data transfer rates
• Supports 48-bit addressing
• 2 MB buffer with multi-adaptive cache manager
• 5400 RPM spin speed
• 10 ms seek time
• Zone density and ID-less recording
• Outstanding shock resistance at 300 Gs
• High durability with 50K contact start/stop cycles
• Advanced multi-burst on-the-fly Error Correction Code (ECC)
• Extended data integrity with ECC protected data and fault
tolerant servo synchronization fields
• Supports EPA Energy Star Standards (Green PC Friendly) with
ATA powering savings commands
• Auto park and lock actuator mechanism
• Low power consumption
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Almacenamiento de Maxtor
Maxtor
Maxtor Maxtor OneTouch 4 Manual de usuario
Maxtor
Maxtor Maxtor OneTouch USB Manual de instalación
Maxtor
Maxtor FIREBALL3 Manual de usuario
Maxtor
Maxtor ATLAS 10K IV Manual de usuario
Maxtor
Maxtor DiamondMax VL 30 Series Manual de usuario
Maxtor
Maxtor MaXLine II Manual de usuario
Maxtor
Maxtor Maxtor OneTouch FireWire Manual de usuario
Maxtor
Maxtor Personal Storage 3000DV Manual de usuario
Maxtor
Maxtor Maxtor OneTouch USB Manual de usuario
Maxtor
Maxtor STM3320820A Manual de usuario
Maxtor
Maxtor DiamondMax Plus 40 Manual de usuario
Maxtor
Maxtor OneTouch STM303203OTA3E1-RK Manual de usuario
Maxtor
Maxtor OneTouch II Manual de usuario
Maxtor
Maxtor Maxtor OneTouch FireWire Manual de usuario
Maxtor
Maxtor Maxtor OneTouch USB Manual de usuario
Maxtor
Maxtor SERIAL ATA HARD DRIVE Manual de usuario
Maxtor
Maxtor Personal Storage 3000LE Manual de usuario
Maxtor
Maxtor M3 Portable Manual de usuario
Maxtor
Maxtor ONETOUCH STM315004OTDB06-RK Manual de usuario
Maxtor
Maxtor Shared Storage Plus+ Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario