max mobility SmartDrive MX2+ Manual de usuario
IMPORTANT!
THE DEFAULT CONTROL MODE OF THE SMARTDRIVE MX2+ HAS CHANGED.
IF THIS MODE IS NOT A PROPER FIT, ANOTHER MODE CAN BE SELECTED.
With your SmartDrive
powered on, press the left but-
ton of the PushTracker to turn
power assist ON. You will get a
blue light and a vibration.
In MX2+ mode, a DOUBLE tap
will START UP the motor and
ramp up its speed, and a SINGLE
tap will coast at the current speed.
Pushes do not power.
TO STOP, perform a DOUBLE
tap to deactivate the motor and
then grip both handrims to slow
down the wheelchair.
Other modes will be different.
To steer while the motor
is driving, lightly grip either
handrim to turn in the direction
you would like to go.
Same as you would without SmartDrive.
To turn while the motor is
driving, grip either handrim
firmly to make a sharp turn or to
turn around completely.
Same as you would without SmartDrive.
Be sure to download the
PushTracker App from the Apple
or Google Play Store on your
smartphone.
SDMX2-QSG Rev. A
SmartDrive MX2 PushTracker
Quickstart Guide
+
PLEASE READ THE USER’S MANUAL FOR BOTH THE SMARTDRIVE
AND PUSHTRACKER BEFORE OPERATING EITHER DEVICE.
ALL WARNINGS AND SAFETY PRECAUTIONS MUST BE HEEDED.
www.max-mobility.com
www.pushtracker.com
Otros manuales para SmartDrive MX2+
1
Otros manuales de Silla de ruedas de max mobility
max mobility
max mobility SDMX2-DUM Manual de usuario
max mobility
max mobility Folder Adaptor Bar Manual de usuario
max mobility
max mobility smartdrive mx1+ Manual de usuario
max mobility
max mobility SmartDrive MX2 Manual de usuario
max mobility
max mobility SmartDrive MX1 Manual de usuario
max mobility
max mobility SmartDrive MX2 Manual de usuario
max mobility
max mobility SmartDrive MX2+ Manual de usuario
max mobility
max mobility SmartDrive Manual de usuario
max mobility
max mobility Thumb Throttle Button Manual de usuario
