Master&Dynamic MW09 Manual de usuario
Master & Dynamic is a New York City-based premium audio company
with a deep passion for building technically sophisticated sound tools.
Designed to be modern yet timeless, our products utilize only the
finest materials and are engineered to last, creating the perfect
balance of aesthetics, strength, comfort, and exceptional sound.
NEVER SOUND THE SAME
USER MANUAL
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCHE
ITALIANO
PORTUGUÊS
2
14
26
38
50
62
日本語
한국어
แบบไทย
繁體中文
简体中文
74
86
98
110
122
Download the M&D Connect
app for the complete
Master & Dynamic experience.
Use the M&D Connect App to access:
•Firmware updates
•Custom settings
MOBILE APP
OVERVIEW
EN
VOL +
Hold: Ambient listening on/off
See page 6 for more information
on ambient listening
VOL -
Hold: Active noise cancelling on/off
See page 6 for more information
on active noise-cancelling
MULTI-FUNCTION BUTTON
1X: Pause/play
2X: Skip
3X: Skip back
Press: Answer incoming call
(or accept from device)
Hold: Activate Voice Assistant
MULTI-FUNCTION
BUTTON
PULSING
INDICATOR LIGHT
RIGHT LEFT
EAR TIPPROXIMITY
SENSOR
VOL+
VOL-
2
CONTROLS
SPECS
EN
3
DIMENSIONS
•Charging Case:
45.5 x 64.5 x 25.6 mm
•Earphones:
20.3 x 21.5 x 21 mm
WEIGHT
•Charging Case (Aluminum): 62.5g
•Charging Case (Kevlar): 50.5g
•Earphones: 8.1g each
•aptX™ Adaptive, AptX Lossless,
AAC, LC3, and SBC
•Snapdragon Sound
BLUETOOTH PROFILE
•Bluetooth®5.4
•11mm Beryllium
SOUND FEATURES
DRIVERS
FIT
Your earphones come with the medium silicone ear tips attached.
Choose the ear tips that form a seal with your ear canal. Our custom
round ear tips are designed in conjunction with the oval nozzle shape to
provide a superior universal fit. Squeeze the ear tip to match its
orientation to the nozzle and then press the ear tip against the nozzle to
attach. Tip: to ensure a secure fit, download the M&D Connect App and
perform a Fit Test.
XS S M L XL
S L
SILICONE
FOAM
4
FIT
EN
To insert your silicone ear tips, follow these steps:
STEP 1: Tilt the earphone forward with the ear tip resting lightly in
your ear canal.
STEP 2: Rotate the earphone down until the ear tip forms a seal with
your ear canal.
To insert your earphones using foam ear tips:
STEP 1: Gently compress the foam ear tip using your fingers.
STEP 2: Insert it into your ear.
STEP 3: Hold the earphones in place until the foam fully expands and
forms a seal with your ear canal.
1.
1. 2. 3.
2.
5
PAIRING
EN
The first time you take both earphones out of their case they will enter
pairing mode.
To manually activate pairing mode, hold down the multi-function button
until the indicator light starts pulsing/pairing tone is heard.
STEP 1: Open the Bluetooth menu on your device
STEP 2: Select M&D MW09
STEP 3: Download and open the M&D Connect app
NOTE: If you are already connected to a device, remove the earphones
from your ears to avoid activating your voice assistant.
Three microphones in each earphone provide the freedom to listen or talk
with just one earphone.
MULTI-FUNCTION BUTTON
PULSING INDICATOR LIGHT
RIGHT
6
MULTIPOINT
EN
Up to two devices can be connected to M&D MW09 at one time.
1. Remove earphones from case. Press and hold the multi-function button
on right earphone to enter pairing mode. Connect to device 1.
2. Enter pairing mode again and device 1 will disconnect.
3. Connect to device 2 and place earphones in case.
4. Remove earphones from case and they will automatically connect to
device 1 and 2 simultaneously.
5. Pause one device and play from the other to swap earphones
connection.
WORLD VOLUME
The MW09 features 2 default World Volume modes to control the volume
of the world around you:
1. Hybrid Active Noise-Cancelling (ANC) for clear, expansive sound in
any environment.
2. Ambient Listening Mode for improved awareness of your surroundings.
Download and install the M&D Connect app to access additional ANC and
Ambient Listening Modes and to select your default World Volume settings.
VOL+
VOL-
VOL -
HOLD: ANC on/off
VOL +
HOLD: Ambient Listening Mode on/off
7
CHARGING
EN
Your earphones hold up to 16 hours of charge. The charging case holds an
additional 32 hours of charge for your earphones. We suggest you place
your earphones inside the case when they are not in use. This will allow
them to have the maximum charge each time you begin to use them.
Your earphones will arrive with the battery partially charged. The battery
status will be displayed when opening /closing the lid. A green light
indicates the battery is between 70-100%, amber indicates 30-69%, and
red indicates 1-29%. If the center battery flashes red or does not display,
the case battery is depleted.
High Med Low
CASE BATTERY
EARPHONE BATTERY
To charge your case, plug in
the USB-C cable into the right
side of your case and plug the
other end into a power source.
To charge your case via
wireless charging, center your
MW09 charging case on any
compatible wireless charging
pad with the LEDs facing
upwards. The MW09 is also
compatible with MC100 and
MC300 Wireless Charge Pads
(sold separately).
8
CHARGING
EN
The battery status of the case and earphones will remain visible while the
case charges.
•Case and earphones charge to 50% in 20 minutes, 100% in
60 minutes via included charging cable
•Case charges to 50% in 20 minutes, 100% in 60 minutes via
included charging cable
•Case charges to 50% in 30 minutes, 100% in 110 minutes
via wireless charging
•Case and earphones charge to 100% in 160 minutes via
wireless charging
Over time the proximity sensor that helps regulate pause/play functions
may become dirty and affect performance. If this happens, take a damp
Q-tip or damp cloth and lightly rub the sensor.
To clean the earphones, use a microfiber cloth. Do not use alcohol or other
cleaning substances on the product. Do not drop, sit on, or allow the
earphones to be exposed to water, moisture, or temperature extremes.
Your earphones are IP54 water resistance rated. Your charging case is
IPX4 rated.
It is recommended that you return your earphones to their storage case
when not in use. Always return your earphones to their charging case
within 72 hours to minimize potential battery life degradation.
MAINTENANCE
9
EN
Operate and store this product within the temperature range of -4°F to
113°F (-20°C to 45°C) only. Charge the battery where the temperature is
between 41°F and 104°F (5°C and 40°C) only.
Replacement parts and cables can be purchased at:
www.masterdynamic.com
TEMPERATURE RANGE
Make sure both earphones are outside the charging case when attempting
to pair your device. Cycle power by placing earphones in the charging case
and fully closing the lid for 10 seconds. Then remove the earphones from
the case to verify they have entered pairing mode. The indicator light will
slowly pulse on the right earphone.
•Turn Bluetooth OFF, then ON again on the source device.
•Turn OFF Bluetooth feature on any other device that is paired with
the earphones.
•Delete any "M&D MW09" earphone connections from your device and
then put your earphones into pairing mode and pair again.
•Make sure “M&D MW09” is selected in the Bluetooth device list.
TROUBLE PAIRING EARPHONES AND
SOURCE DEVICE
TROUBLESHOOTING
10
TROUBLESHOOTING
EN
1. Ensure the earphones are connected in your phone's Bluetooth menu
prior to using in the app.
2. Close and reopen M&D Connect.
3. Update M&D Connect to the latest version in the app store.
4. Update your phone to the latest OS.
5. Disconnect from any other devices that the earphones are connected
to via multipoint.
TROUBLE CONNECTING EARPHONES TO THE
M&D CONNECT APP
Make sure your case is charged. To charge the case, plug one end of
the USB-C cable into the back of the case and plug the other end into a
power source. Try using a diffrerent power adapter or charging cable if
issues persist.
Make sure the earphones are properly placed inside the charging case.
“L” represents placement for the left earphone and “R” for the
right earphone.
Make sure the charging pads on the earphones and charging pins in the
case are clean, and that there is no other debris in the case. Use a damp
Q-tip or damp cloth to lightly rub the charging pads and pins.
NOTE: If the charging case battery is depleted, the indicator lights will not
light up to show your battery level status when earphones are inserted
even if the earphones still have battery life.
BATTERY LEVEL INDICATORS ON CHARGING CASE
ARE NOT LIGHTING UP
Otros manuales para MW09
1
Tabla de contenidos
Otros manuales de Auriculares de Master&Dynamic
Master&Dynamic
Master&Dynamic MH40 Manual de usuario
Master&Dynamic
Master&Dynamic MW09 Manual de usuario
Master&Dynamic
Master&Dynamic MH40 Manual de usuario
Master&Dynamic
Master&Dynamic MW50 Manual de usuario
Master&Dynamic
Master&Dynamic MW07 Manual de usuario
Master&Dynamic
Master&Dynamic MW08 Manual de usuario
Master&Dynamic
Master&Dynamic MH40G1 Manual de usuario
Master&Dynamic
Master&Dynamic ME05 Manual de usuario
Master&Dynamic
Master&Dynamic MW60G1 Manual de usuario
Master&Dynamic
Master&Dynamic ME01 Manual de usuario
Master&Dynamic
Master&Dynamic MH30 Manual de usuario
Master&Dynamic
Master&Dynamic MW65 Manual de usuario
Master&Dynamic
Master&Dynamic MW09 Manual de usuario
Master&Dynamic
Master&Dynamic MW60 Manual de usuario
Master&Dynamic
Master&Dynamic ME05BR Manual de usuario
Master&Dynamic
Master&Dynamic ME05 Manual de usuario
Master&Dynamic
Master&Dynamic MW07 Manual de usuario
Master&Dynamic
Master&Dynamic MW08 Manual de usuario
Master&Dynamic
Master&Dynamic MW08 Manual de usuario
Master&Dynamic
Master&Dynamic MW07 GO Manual de usuario
