marsden V-25 Manual de usuario
USER MANUAL
V-25
Please take time to read these
instructions before starting
to use the scale
Version 1.0 03/17
Contents
Product Specification 3
Safety Instructions 4
Before Using the Scale 5
Operation 6
Error Messages 7
Manufacturer’s Declaration of Conformity
This product has been manufactured in accordance with the harmonized
European standards, following the provisions of the below stated directives:
Electro Magnetic Compatibility Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
Marsden Weighing Machine Group Ltd.
Page 2
Product Specification
Thank you for purchasing a Marsden professional veterinary scale.
This is a precision weighing instrument and considerate use will
result in many years of accurate weighing.
The scale has a maximum load capacity of 25kg which must not be
exceeded.
Model
Marsden V-25
Capacity/Division
25kg x 10g
Units of Measure
Kg/lb
Function Keys
ON/OFF/TARE, HOLD, UNIT
Display
Easy to read LCD display with four active
digits
Operating Temperature
5 to 35°C
Power Supply
2x AAA batteries
Dimensions
630mm x 400mm
Warranty
One year
Weight of Scale
1.8kg
Please note: Marsden’s policy is one of continuous development and therefore
we reserve the right to change product specification without notice.
Page 3
Safety Instructions
Before putting this scale into use, please read with care the information given in this user
manual, which contains important instructions for proper installation, use and maintenance
of the device.
Marsden/the manufacturer shall not be liable for damages arising from failure to heed the
following instructions:
When using electrical components under increased safety requirements, always
comply with appropriate regulations.
Inappropriate installation/use will render the warranty null and void.
Ensure the voltage marked on the power supply unit matches your mains supply.
This product is not waterproof. We do not recommend using the scale in humid,
damp or wet environments.
Observe the permissible ambient temperatures for use.
The device meets the requirements for electromagnetic capability. Do not exceed
the maximum values specified in the applicable standards.
If you have any problems, contact Marsden/your local dealer/your service partner.
Cleaning
Please do not use corrosive liquids or large amounts of water to clean the scale. We
recommend using alcohol-based wipes or similar.
Always disconnect the scale from the mains power supply before cleaning.
Never disassemble the scale as this may cause malfunction.
Maintenance
The scale does not require any routine maintenance. However, we recommend
checking the scale’s accuracy at regular intervals. If any inaccuracies occur, please
contact your local dealer or service partner.
You can book an accuracy check with the Marsden Service team on 01709 364296.
Disposing of the Scale
This product should not be treated as regular household waste, but should be
handed in to an electrical/electronic equipment recycling centre.
Page 4
Before using the Scale
Marsden V-25 scales consist of a plastic platform. There are three easy to use
function keys: ON/OFF/TARE, HOLD, UNIT.
The scale can be used in a fixed location or as a portable scale, powered by 2x AAA
batteries.
If you require any assistance with using the V-25, call the Marsden team on 01709
364296, quoting model number V-25 and the serial number, which can typically be
found on the underside of the scale.
Before use, ensure the scale is on a flat surface. An un-level surface for weighing
could result in inaccurate readings.
Page 5
Operation
Switching the Scale on/off
To switch the V-25 on, press ON/OFF/TARE.
The scale will first show its last recorded weight.
When the scale shows a line of zeros, it is ready to use.
To switch the V-25 off, press and hold ON/OFF/TARE for three seconds.
Using the Tare function
The Tare function allows you to remove unwanted weight from the display, such as
a small cage.
Place the object on the scale and press ON/OFF/TARE. The scale will process the
added weight, display the weight recorded in the memory and display 0:0.0.
Place your pet on the scale, and only the weight of the pet will be displayed.
Alternatively, start by pressing the ON/OFF/TARE button, place the object on the
scale and press ON/OFF/TARE. Place your pet on the scale and only the pet’s
weight will be displayed.
Using the Memory function
With the scale at zero, place the pet on the scale and the weight will be displayed.
Push the HOLD button to hold the weight, this will then be recorded to the scale’s
memory.
The scale will then compare the newly recorded weight to the previous recorded
weight reading, and display whether the new reading is ‘up’ or ‘down’ on the
original.
Page 6
Error Messages
Display
Problem
Solution
L.O.
Low battery
Replace the 2x AAA
batteries
Err
Overload
If the total load exceeds
25kg, the display will show
this message. The weight
must be removed
immediately from the scale
to prevent damage.
Page 7
Tel: 01709 364296 / 0800 169 2775
Fax: 01709 364293
E-mail: sales@marsdengroup.co.uk
Manufacturing and Distribution:
Unit 7, Centurion Business Park,
Coggin Mill Way,
Rotherham,
S60 1FB
Head Office:
Unit 1, Genesis Business Park,
Sheffield Road,
Rotherham
S60 1DX
www.marsden-weighing.co.uk
Tabla de contenidos
Otros manuales de Escala de marsden
marsden
marsden M300 Manual de usuario
marsden
marsden Smart Diet Scale Manual de instalación
marsden
marsden VS 250E Manual de usuario
marsden
marsden VT-250 Manual de usuario
marsden
marsden M-550BT Manual de usuario
marsden
marsden B-450 Manual de usuario
marsden
marsden M-920 Manual de usuario
marsden
marsden BS-250BT Manual de usuario
marsden
marsden Jadever JCO Manual de usuario
marsden
marsden M-400 Manual de usuario
marsden
marsden B-800 Manual de usuario
marsden
marsden M-999 Manual de usuario
marsden
marsden M-565 Manual de usuario
marsden
marsden IP 2101 Manual de usuario
marsden
marsden V-24 Manual de usuario
marsden
marsden M-930 Manual de usuario
marsden
marsden M-610 Manual de usuario
marsden
marsden M-510 Manual de usuario
marsden
marsden M-620 Manual de usuario
marsden
marsden IP 2101 Manual de usuario
