marsden IP 2101 Manual de usuario
IP 2101
USER MANUAL
1
2
TABLE OF CONTENTS
CLEANING.................................................................................................. 3
SPECIFICATION......................................................................................... 4
PANEL.......................................................................................................... 5
KEY FUNCTIONS....................................................................................... 5
LCD SYMBOLS DESCRIPTION ............................................................... 5
USING IP-2101............................................................................................ 6
USING TARE FUNCTION.......................................................................... 6
USING UNIT KEY ...................................................................................... 7
SETTING AUTO-OFF TIME ...................................................................... 7
INSTALLING THE BATTERY ................................................................... 8
ERROR MESSAGE..................................................................................... 9
3
CLEANING
Do not use organic solvents to clean the balance. Clean the
balance with a lint free cloth that is moistened with warm water
and a mild detergent.
Do not disassemble the scale.
Do not use solvents to clean the scale.
For best cleaning of the display unit, wipe with a dry lint free
cloth or a lint free cloth which is moistened with warm water and
a mild detergent.
Do not scratch the base unit with a brush.
Do not use a powerful water jet.
4
SPECIFICATION
Model
IP 2101
Capacity
10lb x 0.002lb
5000g x 1g
Weight Unit
g, lb
Dimensions
170 x 150 x 46.5mm
Platform Size
120 x 150mm
Display
0.8 inch LCD display
Keys
UNIT, ON/OFF, TARE/ZERO
Weight
N.W: 2.6kg, G.W: 3.7kg
Power
9V alkaline battery
9V adapter (male type)
Temperature
Range
5℃up to +35℃
5
PANEL
KEY FUNCTIONS
ON/OFF
Turn ON/OFF the scale.
TARE/ZERO
To Tare the unwanted weight during
weighing process.
UNIT
To select the weighing unit.
LCD SYMBOLS DESCRIPTION
Weighing
Units
Stable Sign
LCD displays measured weight, units
and status information
Low Battery
Minor weight
value
6
USING IP-2101
1. Switch ON the Scale using ON/OFF key.
2. The display will show count down from 88888 and will
automatically the display will zero (weighing mode)
3. Place the item/animal in the middle of the scale. Wait until the
scale stabilizes and stable sign (ο) shows on the screen
Note: The scale will automatically zero when turned on. If a value is
displayed when the platform is empty, press TARE to zero the display.
Direction:
If an item is heavier than the scale capacity, the display will show
„Err” prompt (= overload).
USING TARE FUNCTION
Tare allows the user to zero the weight of a container from the
reading shown on the display of the scale, thus giving the true
weight of the product being tested.
Turn on the scale using ON/OFF key.
When is displayed on the screen. Place the empty
container on to the weigh plate.
Press TARE/ZERO key after the weight stabilizes and stable
sign appears on the display.
Display will return to .
Place the item that needs to be weighed (without removing the
tare object). The display shows the Net weight of the item.
To remove the saved tare value, remove the container from the
weigh plate and press TARE/ZERO key.
7
USING UNIT KEY
UNIT key is used to switch from one weighing unit to another. For
example: glb.
IP-2101 Unit key is very easy to use, simply presses UNIT key to
switch the weighing unit.
SETTING AUTO-OFF TIME
IP-2101 has Auto-Off time option, which enables the scale to be
turned off automatically if the scale is not in use. The time duration
for auto-off can be selected in the following way:
Turn-On the scale using ON/OFF key.
Long press TARE key for 3 seconds after the count down
stops and LCD displays zero.
First ‘SET’ and then ‘UNIT’ will display.
Press ‘UNIT’ key once.
A_OFF will display on the screen.
Press TARE key, the default auto-off time will display on the
screen.
Press UNIT key to select the Auto-off time.
Auto-off time can be set to 120/180/240/300 seconds.
Or
Auto-off option can be turned-off
To confirm press TARE key again. For Example- If you want
to select 240 seconds, press TARE key when ‘240 S’
displays on the screen. Press UNIT twice. Displays “End”.
Press TARE key to confirm.
Note- AUTO-OFF option only works when the scale is using battery
power. If the scale is using Adaptor, AUTO-OFF will disable
automatically.
8
9
INSTALLING THE BATTERY
Note: If the battery door is not closed properly, water can get
into the battery compartment, causing the unit to malfunction.
Remove battery housing cover.
Install 9V alkaline battery.
Install back the battery cover.
9
ERROR MESSAGE
Error Message
Reason
Action
Low Battery
Replace batteries or plug
the AC adaptor
Total load exceeds the
maximum capacity of the
scale
Reduce the weight and try
again
Counting Error (too low):
The signal from the load cell
is too low
Please contact the local
service representative.
Fault in the software
Please contact the local
service representative.
Otros manuales para IP 2101
1
Tabla de contenidos
Otros manuales de Escala de marsden
marsden
marsden BAS-250 Manual de usuario
marsden
marsden M-310 Manual de usuario
marsden
marsden V-23 Manual de usuario
marsden
marsden M-700 Manual de usuario
marsden
marsden BFA-220R Manual de usuario
marsden
marsden B-450 Manual de usuario
marsden
marsden BS-250BT Manual de usuario
marsden
marsden IP 2101 Manual de usuario
marsden
marsden M-610 Manual de usuario
marsden
marsden M-545 Manual de usuario
marsden
marsden M-610 Manual de usuario
marsden
marsden MS2300 Manual de usuario
marsden
marsden M-200 Manual de usuario
marsden
marsden BAS-200 Manual de usuario
marsden
marsden B-100 Manual de usuario
marsden
marsden MS-4400 Manual de usuario
marsden
marsden MBF-6000 Manual de usuario
marsden
marsden MPPS-250 Manual de usuario
marsden
marsden VT-250 Manual de usuario
marsden
marsden M-65 Series Manual de usuario
