Marmitek Invisible Control 6 XTRA Manual de usuario
v
isible Contr
o
X
TRA | SMA
R
20662/20160201 • Invisible Control 6 XTRA | SMART™
ALL RIGHTS RESERVED MARMITEK ©
USER MANUAL 3
GEBRAUCHSANLEITUNG 15
GUIDE UTILISATEUR 27
MODO DE EMPLEO 39
MANUALE D’ISTRUZIONI 51
GEBRUIKSAANWIJZING 63
Invisible Control
6 XTRA | SMART
™
© MARMITEK
2
Invisible Control 6 XTRA | SMART™
3
ENGLISH
SAFETY WARNINGS
xTo prevent short circuits, this product should only be used
inside and only in dry spaces. Do not expose the
components to rain or moisture. Do not use the product close
to a bath, swimming pool etc.
xDo not expose the components of your systems to extremely
high temperatures or bright light sources.
xIn case of improper usage or if you have altered and repaired
the product yourself, all guarantees expire. Marmitek does
not accept responsibility in the case of improper usage of the
product or when the product is used for purposes other than
specified. Marmitek does not accept responsibility for
additional damage other than covered by the legal product
responsibility.
xDo not open the product: the device may contain live parts.
The product should only be repaired or serviced by a
qualified repairman.
xOnly connect the adapter to the mains after checking
whether the mains voltage is the same as the values on the
identification tags. Never connect an adapter when it is
damaged. In that case, contact your supplier.
xThis product is not a toy. Keep out of reach of children.
1. INTRODUCTION
Congratulations on your purchase of the Invisible Control 6 XTRA
| SMART™! The Invisible Control 6 XTRA | SMART™ allows you to
extend the IR (infrared) signals from your remote control and to
operate your A/V equipment using your smartphone/tablet via the
corresponding iOS or Android app. The Invisible Control 6 XTRA |
SMART™gives you the opportunity to control your A/V equipment
when it’s stored away in a closed cabinet or placed out of sight.
Marmitek products are manufactured with the utmost care and are
exceptionally high quality. Please read this manual carefully and
follow the instructions in order to get the best from this product.
© MARMITEK
4
2. SET CONTENTS
1x IR Receiver + adhesive strip
1x IR Smart module + adhesive strip
1x IR Extender cable with one IR blaster LED + adhesive strip
2x IR Extender cable with two IR blaster LEDs + adhesive strip
1x Power Adapter
1x User manual
3. HOW DOES IT WORK?
Place your A/V equipment inside a closed (TV) cabinet. The IR
receiver (1) should be installed within your remote control's line of
sight. Stick the Blaster LEDs (2) marked 'IR OUT' wherever you
like inside the (TV) cabinet, enabling you to operate all A/V
equipment in the same compartment. Stick the Blaster LED (3)
marked 'IR TV' on the outside of the (TV) cabinet on or within sight
of your TV's IR sensor. Then store the IR Smart Module (4) neatly
away.
Point the remote at the small IR receiver to send the desired
command to the 'IR OUT' Blaster LEDs (2); these will instantly
transfer the infrared command to the A/V equipment inside the
(TV) cabinet. The 'IR TV' Blaster LED (3) is only operated using
your smartphone/tablet.
Invisible Control 6 XTRA | SMART™
5
ENGLISH
4. INSTALLATION
In order to check that the system works correctly, it is advisable to
first test the set-up you had in mind. To do so, connect everything
as described below but do not stick the components securely.
4.1 LOCATING THE IR RECEIVER
Place the very small IR receiver (1) that comes with the Invisible
Control 6 XTRA | SMART™so that it can be seen by your (infrared)
remote control and receive the commands (max. 10 metres).
xThe most logical location for the IR receiver is, for example,
on the (TV) cabinet in which the A/V equipment is located or
near the TV.
xYou can run the cable underneath or behind, using the notch
at the back of the IR receiver housing; this allows the cable
to be hidden easily.
xUse the self-adhesive strip which is supplied to locate the IR
receiver just about anywhere you please.
xExperiment with the location before you stick the IR receiver
in its final position.
xNote! The sticky strip may lead to discolouration or leave
glue residues on certain surfaces.
© MARMITEK
6
4.2 LOCATING THE IR BLASTER LED
4.2.1 Inside the (TV) cabinet
Stick the Blaster LEDs (2) that are connected to the 'IR OUT'
output wherever you like inside the (TV) cabinet, enabling you to
operate all A/V equipment inside the same compartment.
xWith a correct placement one blaster LED can control all A/V
devices placed in the same compartment.
xIn some situations it is necessary to place a second blaster
LED if not all A/V devices can be controlled with one blaster
LED.
xOr you place the blaster LED on one of the A/V devices in
the middle of the (TV) cabinet and the other equipment will
be controlled as well by the reflection of the infrared signal.
Invisible Control 6 XTRA | SMART™
7
ENGLISH
4.2.2 Outside the (TV) cabinet
Stick the Blaster LED (3) that is connected to the 'IR TV' 'output,
outside the (TV) cabinet on or within sight of your TV's IR sensor.
© MARMITEK
8
4.3 Positioning the IR Smart module
Place the IR Smart Module (4) in an accessible place on or next to
your A/V equipment, and near an electrical outlet.
xTake into account the cable
length of the IR Blaster
LED and the IR receiver
cable.
xNote that the connectors
remain accessible and that
the LEDs remain visible to
check for proper operation.
xThe supplied adhesive strip
allows
placement practically
anywhere.
Invisible Control 6 XTRA | SMART™
9
ENGLISH
4.4 Connecting the IR Smart module
1. Connect the installed IR extension cables with two Blaster
LEDs to the IR Smart Module's 'IR OUT' jack.
2. Connect the installed IR extension cables with one Blaster
LED to the IR Smart Module's 'IR TV' jack.
3. Connect the installed IR Receiver cable to the ‘IR IN’
connection on the IR Module:
4. Connect the USB Power adapter to the ‘POWER’ connection
on the IR Module and plug this into an electrical socket.
5. If the Invisible Control 6 XTRA | SMART™ is connected
correctly, the red light on the IR Smart module will flash when
a button on the (infrared) remote control is pressed while
pointing the remote to the IR receiver.
6. Close the doors of your (TV) cabinet to ensure that the A/V
equipment cannot receive an infrared command directly from
the remote control as this can lead to operational problems.
7. You can now operate the A/V equipment via the Invisible
Control 6 XTRA | SMART™through closed cupboard doors!
© MARMITEK
10
4.5 Installing the Invisible Control app
When the Marmitek Invisible Control 6 XTRA | SMART™ is installed
by following the steps in this manual, you can, in addition to your
remote control, also use your smartphone/tablet to operate any
devices outside the line of sight. First, you will need to install the
Marmitek Invisible Control app and enable Bluetooth on your
smartphone/tablet.
Then, the app automatically establishes a Bluetooth connection,
after which you can start adding features. Check the "Help" button
in the app's settings menu to learn how to best use the app.
Download the ''Invisible Control" app
on your smartphone/tablet:
http://goo.gl/nR2doa
http://goo.gl/iIOXIV
Otros manuales para Invisible Control 6 XTRA
2
Tabla de contenidos
Idiomas:
Otros manuales de Extensor de Marmitek
Marmitek
Marmitek MegaView 60 Manual de usuario
Marmitek
Marmitek MegaView 63 Manual de usuario
Marmitek
Marmitek MegaView 65 Manual de usuario
Marmitek
Marmitek IR 100 USB Manual de usuario
Marmitek
Marmitek GigaVideo 580 Manual de instrucciones
Marmitek
Marmitek MegaView 251 Pro Manual de usuario
Marmitek
Marmitek IR 100 USB Manual de usuario
Marmitek
Marmitek Megaview60 Manual de usuario
Marmitek
Marmitek MegaView70 Manual de instrucciones
Marmitek
Marmitek GigaView 911 UHD Manual de usuario
Marmitek
Marmitek Powermid XL PM10E Manual de usuario
Marmitek
Marmitek Powermid 300 XTRA Manual de usuario
Marmitek
Marmitek GIGAVIEW 745 Manual de usuario
Marmitek
Marmitek IR Eye Manual de usuario
Marmitek
Marmitek MegaView 121 Manual de usuario
Marmitek
Marmitek Invisible Control 6 Manual de usuario
Marmitek
Marmitek IR Control 10 XTRA Manual de usuario
Marmitek
Marmitek MegaView 76 Manual de usuario
Marmitek
Marmitek Powermid XS Manual de usuario
Marmitek
Marmitek IR CONTROL 8 Manual de usuario
