Manhattan 179133 Manual de usuario

HI-SPEED

USB 2.0 DVI

CONVERTER

USER

MANUAL

MODEL 179133

MAN-179133-UM-0708-01

INTRODUCTION

Thank you for purchasing the MANHATTAN®Hi-Speed USB 2.0 DVI

Converter, Model 179133.

This handy device helps increase productivity, improve “desktop”

arrangements and extend the visual work area across dual monitors by

making word processing, editing and multi-tasking more effective with

less overlapped windows, fewer hidden palettes and better-organized

views. Read e-mail on one monitor and open attachments on the other;

expand and view large, complicated spreadsheets without scrolling;

make presentations more compelling with another monitor for greater

impact or viewing speaker notes on a separate display.

The convenient Hi-Speed USB 2.0 connection eliminates the need to

install another graphics card or struggle with compatibility issues, making

this converter an ideal portable solution for notebook computers and

desktop systems with graphics cards that lack additional outputs. And

with Plug and Play and hot-swap capabilities, it’s easily installed without

an external power supply on any Windows computer. The easy-to-

follow instructions in this user manual make installation of the converter

relatively quick and simple, so you’ll also soon be enjoying the benets

of these additional features:

• Primary, extended, mirror and rotation functions provide display

continuity and dual views

• Supports DVI resolutions up to 1600 x 1200

• Connects to any USB port without conicts or external power supplies

• Lifetime Warranty

System Requirements

• Windows 2000/XP/Vista

• Available Hi-Speed USB 2.0 port

Package Contents

• Hi-Speed USB 2.0 DVI Converter

• USB cable

• Quick install guide; driver CD with user manual*

* Some screen images have been modied to t the format of this manual.

INTRODUCTION

Regulatory Statements

FCC

This equipment has been tested and found to comply with FCC rules

Part 15, Subpart B § 15.109/15.107 Class B. Operation is subject to

the following two conditions:

• This device may not cause harmful interference; and

• This device must accept any interference received, including

interference that may cause undesired operation.

This equipment is in compliance with the requirements of the following

regulations: EN 55022 Class B (2006); EN 55024 (1998+A1:2001+

A2:2003); IEC/EN 61000-3-2 (2006); IEC/EN 61000-3-3 (1995+A1

:2001+A2 :2005); (IEC/EN 61000-4-2 (1995+A1 :1998+A2 :2001)/-3

(2006)/-4(2004)/-5(2006)/-6 (1996+A1 :2001)/-11 (2004)

C-Tick

This equipment is in compliance with the requirements of the following

regulations: EN 55022 (2006); AS/NZS CISPR22 © IEC: 2005.EN 55022 (2006); AS/NZS CISPR22 © IEC: 2005.

VCCI

This equipment is in compliance with the requirements of the following

regulation: CISPR22 © IEC: 2005.

Important Pre-Installation Notes

• Unplug any USB 2.0 VGA adapter connected to your PC or notebook

computer before executing the Hi-Speed USB 2.0 DVI Converter

setup or un-installation program.

• An AC power adapter is required for an external USB hub. The driver

allows up to six Hi-Speed USB 2.0 DVI Converters on one PC.

• Connect the display device to the DVI connector of the Hi-Speed

USB 2.0 DVI Converter and switch the display device on before

plugging the converter into an available USB 2.0 port of the PC or

notebook computer.

• Do not reboot the computer until all USB 2.0 DVI Converters are

installed.

INTRODUCTION

INSTALLATION: WINDOWS 2000/XP

Driver Installation

Installing the device driver enables your computer’s operating system

to recognize the Hi-Speed USB 2.0 DVI Converter once it’s connected.

Check your operating system and refer to the appropriate installation

procedure to begin installing the device driver. Make sure the converter

is unplugged from your PC or notebook computer before executing the

setup program.

1. Insert the driver CD into the CD-ROM drive. The setup program

should be launched automatically. If the setup program does not

begin automatically, go to Start, then Run, then double-click “D:\

Setup.exe” (where D: is the path of your CD-ROM drive).

2. When the Welcome

screen of the InstallShield

Wizard displays, click

“Next” to continue.

3. When the License

Agreement screen

displays, read it and

select “I accept the terms

of the license agreement.”

Click “Next” to accept the

license agreement and

continue with the install.

4. Connect the external display device (monitor/projector) to the DVI

connector of the converter and switch the display device on.

INSTALLATION: WINDOWS 2000/XP

5. With the Complete screen

displayed, click “Finish”

to exit the driver wizard.

Plug the converter into

an available USB 2.0

port of your PC or

notebook computer.

6. If installing a single

converter, select “Yes, I

want to restart my

computer now” and click

“Finish” to complete the

driver installation.

NOTE: If installing more

than one converter,

proceed to Step 7. After

rebooting the computer,

the extended display will

be shown on the second

display device.

7. If installing more than

one converter, select

“No, I will restart my

computer later” and click

“Finish” to continue with

the installation of the

second converter.

Connect the next display

device to the additional

converter’s DVI

connector and switch it

on. Plug this additional

converter into another

USB 2.0 port on the computer; the driver will again proceed to install

automatically. Continue connecting up to six display devices and

converters as instructed above; or select “Yes, I want to restart my

computer now” (as shown in Step 6) and click “Finish.” After each

reboot, the extended display will be shown on the display device.

INSTALLATION: WINDOWS 2000/XP

Verifying Driver Installation

Right-click My Computer and go to Properties → Hardware → Device

Manager. Double-click “Display adapters” and “Universal Serial Bus

controllers.”

• For a single Hi-Speed USB 2.0 DVI Converter installation on the

computer, conrm the listings shown below.

INSTALLATION: WINDOWS 2000/XP

• For multiple Hi-Speed USB 2.0 DVI Converter installations on the

computer, conrm the listings shown below.

Driver Un-Installation

Make sure the Hi-Speed USB 2.0 DVI Converter is unplugged from

the PC or notebook computer before executing the device driver

un-installation program.

1. Go to Start, then Control Panel (on a classic start menu, Settings

then Control Panel) → Add or Remove Programs.

INSTALLATION: WINDOWS 2000/XP

2. Select “USB 2.0

External Graphics

Card with DVI

Interface (Multiple)

[driver version no.]”

and click “Remove.”

3. When the Conrm

Un-Install prompt

displays, unplug the

converter and click

“OK” to continue.

4. When the InstallShield

Wizard Complete

screen displays,

select “Yes, I want to

restart my computer

now” and click “Finish”

to reboot. After

rebooting, you will

have completed the

driver un-installation.

INSTALLATION: WINDOWS 2000/XP

INSTALLATION: WINDOWS VISTA

Driver Installation

Installing the device driver enables your computer’s operating system

to recognize the Hi-Speed USB 2.0 DVI Converter once it’s connected.

Check your operating system and refer to the appropriate installation

procedure to begin installing the device driver. Make sure the converter

is unplugged from your PC or notebook computer before executing the

setup program.

1. Insert the driver CD into the CD-ROM drive. The setup program

should be launched automatically. If the setup program does not

begin automatically, go to Start, then Run, then double-click

“D:\Setup.exe” (where D: is the path of your CD-ROM drive).

2. When the Welcome

screen of the

InstallShield Wizard

displays, click “Next” to

continue.

3. When the License

Agreement screen

displays, read it and

select “I accept the

terms of the license

agreement.” Click “Next”

to accept the license

agreement and continue

with the install.

INSTALLATION: WINDOWS VISTA

4. A Windows Security

screen may appear,

but will not affect the

driver installation or

converter operation.

Select “Always trust

software...” and click

“Install” to continue.

5. Allow the program to

proceed while this

status screen displays...

6. Connect the external display device (monitor/projector) to the DVI

connector of the converter and switch it on.

7. When the InstallShield

Wizard Complete

screen displays, click

“Finish” to exit. Plug

the converter into an

available USB 2.0 port

on the computer.

8. If installing a single

converter, select “Yes, I

want to restart my

computer now” and click

“Finish” to complete the

driver installation.

NOTE: If installing more

than one converter,

proceed to Step 9. After

rebooting the computer,

the extended display will

be shown on the second

display device.

9. If installing more than one converter, select “No, I will restart my

computer later” and click “Finish” to continue with the installation of

the second converter. Connect the next display device to the

INSTALLATION: WINDOWS VISTA

Otros manuales para 179133

Tabla de contenidos

Otros manuales de Convertidor de medios de Manhattan

Manhattan

Manhattan 179225 Manual de usuario

Manhattan

Manhattan 152303 Manual de usuario

Manhattan

Manhattan 150439 Manual de usuario

Manhattan

Manhattan 151283 Manual de usuario

Manhattan

Manhattan 151047 Manual de usuario

Manhattan

Manhattan 179041 Manual de usuario

Manhattan

Manhattan 152990 Manual de usuario

Manhattan

Manhattan 158138 Manual de usuario

Manhattan

Manhattan 207959 Manual de usuario

Manhattan

Manhattan 177351 Manual de usuario

Manhattan

Manhattan 205146 Manual de usuario

Manhattan

Manhattan 205146 Manual de usuario

Manhattan

Manhattan 152129 Manual de usuario

Manhattan

Manhattan 152716 Manual de usuario

Manhattan

Manhattan 336581 Manual de usuario

Manhattan

Manhattan 150439 Manual de usuario

Manhattan

Manhattan 158282 Manual de usuario

Manhattan

Manhattan 164115 Manual de usuario

Manhattan

Manhattan 179119 Manual de usuario

Manhattan

Manhattan 151443 Manual de usuario

Manhattan

Manhattan 308250 Manual de usuario

Manhattan

Manhattan 162579 Manual de usuario

Manhattan

Manhattan 151283 Manual de usuario

Manhattan

Manhattan 179225 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario