Maeda CC1908S-1 Guía del usuario
520E-QG2006-00
QUICK OPERATION GUIDE
CRAWLER CRANE
Serial No. 9003 and up
WARNING
・This operation guide explains basic operation of the machine. Before starting work, always conduct
checks written in OPERATION MANUAL.
For safety cautions and detailed operation of the machine not explained in this book, please read
and understand the separate “OPERATION MANUAL” before operating this machine.
・This quick operation guide does not replace the operation manual. This is just a short helpful
information paper to assist the trained crane operator with the basic operation of the crane. For
complete and detailed information we refer to the operation manual of the crane.
M A E D A Crawler Crane CONTENTS
6/2020 CC1908S-1 Quick operation guide 1
1. SAFETY
1.1 SAFETY INFORMATION....................................................................2
2. PART NAMES
2.1 MACHINE PART NAMES...................................................................3
2.2 CAB INTERIOR UNIT NAMES ...........................................................4
2.3 SWITCHES.........................................................................................5
2.4 MONITOR：HOME SCREEN ............................................................6
2.5 MONITOR：USER SETTINGS SCREEN ..........................................7
3. MOMENT LIMITER
3.1 MOMENT LIMITER CONFIGURATION..............................................8
3.2 MONITOR：MOMENT LIMITER DISPLAY ........................................9
4. OPERATION
4.1 STARTING AND STOPPING ENGINE.............................................10
4.2 MACHINE TRAVELLING..................................................................12
4.3 CRANE OPERATION .......................................................................15
5. RTL AND WORKING RADIUS/LIFTING HEIGHT
5.1 RATED TOTAL LOAD CHART FOR 6-FALL HOOK ........................19
5.2 WORKING RADIUS/LIFTING HEIGHT DIAGRAM...........................20
CONTENTS
SAFETY M A E D A Crawler Crane
2 6/2020 CC1908S-1 Quick operation guide
1. SAFETY
Safety cautions and detailed operation of the machine not explained in this book, please read and
understand the separate “OPERATION MANUAL” before operating this machine.
1.1 SAFETY INFORMATION
This manual classifies hazards as follows to
ensure this manual and the safety labels attached
to this machine are easy to understand:
DANGER
This indicates imminent
hazards that can cause
serious injury or death.
It also provides
information on how to
avoid such hazards.
WARNING
This indicates hazards
that can cause serious
injury or death.
It also provides
information on how to
avoid such hazards.
CAUTION
This indicates potential
hazards that may cause
minor or moderate injury
or serious damage to the
machine.
It also provides
information on how to
avoid such hazards.
This manual also uses the following indications
for precautions that must be adhered to and for
other useful information:
IMPORTANT
This denotes that failure
to properly handle the
machine may damage it
or shorten its service life.
This denotes useful
information.
The operating procedures, inspection and
maintenance procedures, and safety precautions
described in this manual apply only when the
machine is used for the specified tasks.
The precautions given in this manual and on this
machine do not necessarily cover every safety
issue.
When carrying out machine operations or
inspection and maintenance procedures that are
not described in this manual, you are responsible
for taking the necessary safety precautions.
Regardless of the above, never attempt to
perform work or operations that are prohibited in
this manual.
M A E D A Crawler Crane PARTS AND CONTROLS
6/2020 CC1908S-1 Quick operation guide 3
2. PART NAMES
2.1 MACHINE PART NAMES
(1) Boom
(2) Boom working light
(3) Boom derricking cylinder
(4) Winch
(5) Head light
(6) Wiper (Front window)
(7) Wiper (Roof window)
(8) Sprocket, travel motor
(9) Track frame
(10) Idler
(11) Crawler
(12) Hook block
(13) Overwinding detector
(14) Working status lamp
(15) Multi-assist view camera
(16) Toolbox (Option)
(17) Blade (Option)
PARTS AND CONTROLS M A E D A Crawler Crane
4 6/2020 CC1908S-1 Quick operation guide
2.2 CAB INTERIOR UNIT NAMES
(1) Air conditioner operation unit
(2) Cab radio
(3) Safety lock lever
(4) Left-hand control lever
(5) Travel levers
(6) Accelerator pedal
(7) Monitor
(8) Right-hand control lever
(9) USB power supply port
(10) Accessory power supply
(11) Sun visor
(12) Sun shade
(13) Interior lamp
(14) Option bar (Option)
(15) Blade control lever (Option)
M A E D A Crawler Crane PARTS AND CONTROLS
6/2020 CC1908S-1 Quick operation guide 5
2.3 SWITCHES
(1) Emergency stop switch
(2) Horn switch
(3) Boom/fly jib selector switch
(4) Hook stowage lever
(5) Starter switch
(6) Light switch
(7) Front window wiper switch
(8) Roof window wiper switch
(9) Buzzer cancelling switch
(10) Winch 1st speed/2nd speed selector switch
(11) Travel mode selector switch
(12) Camera selector switch
(13) Maintenance switch
(14) Interior lamp switch
(15) Disconnecting switch
PARTS AND CONTROLS M A E D A Crawler Crane
6 6/2020 CC1908S-1 Quick operation guide
2.4 MONITOR：HOME SCREEN
(1) Clock/date display
(2) Hour meter
(3) Engine speed
(4) Fuel gauge
(5) Pop-up selector switches (Home screen)
(6) User setting switch
(7) DPF stationary regeneration switch
(8) Camera selector switch
(9) Travel 1st speed/2nd speed selector switch
(10) Home switch
(11) Travel status
(12) Level gauge
(13) Winch 1st speed/2nd speed display
(14) Moment limiter display
(15) Status display
(16) Warning display
(17) Message display
M A E D A Crawler Crane PARTS AND CONTROLS
6/2020 CC1908S-1 Quick operation guide 7
2.5 MONITOR：USER SETTINGS SCREEN
The User Settings screen is displayed by pressing the user setting switch on the home screen.
(1) ECO setting selection
(2) Number of falls selection
(3) Language selection
(4) Error history display
(5) Software version
(6) Hook grounding stop on/off selection
(7) Fly jib installation/stowage
(Only with fly jib mounted)
(8) Monitor brightness adjustment
(9) Time setting
(10) Consumables display
(11) Switch operation tone on/off selection
(12) Multi-assist view automatic switching on/off
(13) Searcher Hook Setting
(Only when searcher hook is mounted)
(14) Pop-up selector switches
(User Settings screen)
(15) Home switch
MOMENT LIMITER M A E D A Crawler Crane
8 6/2020 CC1908S-1 Quick operation guide
3. MOMENT LIMITER
3.1 MOMENT LIMITER CONFIGURATION
(1) Boom length meter (left side of boom)
(2) Boom angle indicator (left side of boom)
(3) Pressure sensor (derricking cylinder) (2 units)
(4) Over un-winding prevention device (winch)
(5) Overwinding detector (side of boom tip)
(6) Working status lamp
(A) Rotating red lamp (warning lamp when
load factor is 100 % or more)
(B) Rotating yellow lamp (advance warning
lamp when load factor is 90 % to less than
100 %)
(C) Rotating green lamp (operation lamp
when load factor is less than 90 %)
(7) Monitor (moment limiter display) (inside cab)
(8) Maintenance switch (inside cab)
(9) Override switch
Otros manuales para CC1908S-1
2
Tabla de contenidos
Otros manuales de Equipos de construcción de Maeda
Maeda
Maeda LC785M-8B Manual de usuario
Maeda
Maeda MC-174CRM Manual de usuario
Maeda
Maeda MC-285C Manual de usuario
Maeda
Maeda MC815C Guía del usuario
Maeda
Maeda MC285CB-3 Manual de usuario
Maeda
Maeda LC1385M-8BF Manual de usuario
Maeda
Maeda MC285C-2 Manual de usuario
Maeda
Maeda CC1485S-1 Guía del usuario
Maeda
Maeda MC174 Manual de usuario
Maeda
Maeda HIRD MC815 Manual de usuario
Maeda
Maeda MC-174CRM Guía del usuario
Maeda
Maeda MC815C Manual de usuario
Maeda
Maeda CC1908S-1 Manual de usuario
Maeda
Maeda MC405C-3 Manual de usuario
Maeda
Maeda MC-305C-2 Guía del usuario
Maeda
Maeda MC-104C-2 Manual de usuario
Maeda
Maeda CC1908S-1 Manual de usuario
Maeda
Maeda MC815C Manual de usuario
Maeda
Maeda MC-305C-2 Manual de usuario
Maeda
Maeda CC1485S-1 Manual de instalación
