M-system R7C-EC8C Manual de usuario

R7C-EC8C

P. 1 / 3EM-7801-AH

RELAY CONTACT OUTPUT EXTENSION MODULE, 8 points

(CC-Link V.1.10) MODEL

R7C-EC8C

INSTRUCTION MANUAL

BEFORE USE ....

Thank you for choosing M-System. Before use, please check

contents of the package you received as outlined below.

If you have any problems or questions with the product,

please contact M-System’s Sales Ofﬁce or representatives.

■ PACKAGE INCLUDES:

Discrete output extention module ............................... (1)

■ MODEL NO.

Conﬁrm Model No. marking on the product to be exactly

what you ordered.

■ INSTRUCTION MANUAL

This manual describes necessary points of caution when

you use this product, including installation, connection and

basic maintenance procedures.

POINTS OF CAUTION

■ GENERAL PRECAUTIONS

Before you remove the unit or mount it, turn off the power

supply and input signal for safety.

■ ENVIRONMENT

• Indoor use

• When heavy dust or metal particles are present in the air,

install the unit inside proper housing with sufﬁcient ven-

tilation.

• Do not install the unit where it is subjected to continuous

vibration. Do not subject the unit to physical impact.

• Environmental temperature must be within -10 to +55°C

(14 to 131°F) with relative humidity within 30 to 90% RH

in order to ensure adequate life span and operation.

■ WIRING

• Do not install cables (power supply, input and output)

close to noise sources (relay drive cable, high frequency

line, etc.).

• Do not bind these cables together with those in which

noises are present. Do not install them in the same duct.

■ AND ....

The unit is designed to function as soon as power is sup-

plied, however, a warm up for 10 minutes is required for sat-

isfying complete performance described in the data sheet.

R7C-EC8C

P. 2 / 3EM-7801-AH

+24V

COM0

COM1

NO.

 ID FUNCTION

NO.

 ID FUNCTION

1 0V 0V 10 +24V 24V DC

2 COM0 Common 0 11 Y0 Output 0

3 COM0 Common 0 12 Y1 Output 1

4 COM0 Common 0 13 Y2 Output 2

5 COM0 Common 0 14 Y3 Output 3

6 COM1 Common 1 15 Y4 Output 4

7 COM1 Common 1 16 Y5 Output 5

8 COM1 Common 1 17 Y6 Output 6

9 COM1 Common 1 18 Y7 Output 7

■ OUTPUT TERMINAL ASSIGNMENT

COMPONENT IDENTIFICATION

0 1 2 3 4 5 6 7

10 11 12 13

2 3 41

15 16 17 18

7 8 96

Discrete I/O Status Indicator LED

Output Terminals

■ DISCRETE I/O STATUS INDICATOR LED

Discrete I/O modules including those for extensions have

LED indicators showing I/O signal status.

Contact ON : LED ON

Contact OFF : LED OFF

EXTERNAL DIMENSIONS unit: mm (inch)

11.5

(.45)

10 11 12 13

2 3 41

15 16 17 18

7 8 9

94 (3.70)

30 (1.18) [5 (.20)]

DIN RAIL

35mm wide

54 (2.13)

17 (.66)

18–M3 SCREW

TERMINALS

for OUTPUT

6 (.24)

3 (.12)5.5 (.22) 50 (1.97) 18.5 (.73)

R7C-EC8C

P. 3 / 3EM-7801-AH

M-SYSTEM WARRANTY

M-SystemwarrantssuchnewM-Systemproductwhichitmanufacturestobefreefromdefectsinmaterialsandworkmanshipduringthe36-monthperiodfollowingthedatethatsuch

productwasoriginallypurchasedifsuchproducthasbeenusedundernormaloperatingconditionsandproperlymaintained,M-System’ssoleliability,andpurchaser’sexclusive

remedies,underthiswarrantyare,atM-System’soption,therepair,replacementorrefundofthepurchasepriceofanyM-Systemproductwhichisdefectiveunderthetermsofthis

warranty.Tosubmitaclaimunderthiswarranty,thepurchasermustreturn,atitsexpense,thedefectiveM-Systemproducttothebelowaddresstogetherwithacopyofitsoriginal

salesinvoice.

THISISTHEONLYWARRANTYAPPLICABLETOM-SYSTEMPRODUCTANDISINLIEUOFALLOTHERWARRANTIES,EXPRESSORIMPLIED,INCLUDINGANYIMPLIED

WARRANTIESOFMERCHANTABILITYORFITNESSFORAPARTICULARPURPOSE.M-SYSTEMSHALLHAVENOLIABILITYFORCONSEQUENTIAL,INCIDENTALOR

SPECIALDAMAGESOFANYKINDWHATSOEVER.

M-SystemCo.,Ltd.,5-2-55,Minamitsumori,Nishinari-ku,Osaka557-0063JAPAN,Phone:(06)6659-8201,Fax:(06)6659-8510,E-mail:[email protected]

WIRING INSTRUCTIONS

■ SOLDERLESS TERMINAL mm (inch)

Refer to the drawing below for recommended ring tongue

terminal size. Spade tongue type is also applicable. Solder-

less terminals with insulation sleeve do not ﬁt. Applicable

wire size: 0.3 – 0.75 mm2

CONNECTION DIAGRAM

Connect the unit as in the diagram below.

3.2 (.13) dia.

4 min.

(.16)

12 (.47) max.

6 max.

(.24)

3 (.12) max.

� Output Connection Examples

4 Points per Common

+24V

24V DC

+ –

COM0

+−

COM1

+−

8 Points per Common

+24V

24V DC

+ –

COM0

COM1

+ –

COM0

COM1

+24V

COM1

–

EXTENSION CONNECTOR

CONNECTING THE EXTENSION MODULE

1) Remove the extension connector cover located at the side

of the basic module.

2) Connect the extension module.

3) Mount the combined module on a DIN rail.

Otros manuales de Unidad de control de M-system

M-system

M-system R7M-EC8C Manual de usuario

M-system

M-system R7M-DAC16C Manual de usuario

M-system

M-system R30BS Manual de usuario

M-system

M-system R7L-RS4 Manual de usuario

M-system

M-system R7M-EA8 Manual de usuario

M-system

M-system R6S-RS2 Manual de usuario

M-system

M-system R3-NL1 Manual de usuario

M-system

M-system R7ML-DC16A Manual de usuario

M-system

M-system R7L-RR8 Manual de usuario

M-system

M-system R7ML-EC8D Manual de usuario

M-system

M-system R3-DS4 Manual de usuario

M-system

M-system R30CT4E Manual de usuario

M-system

M-system R3-PT4 Manual de usuario

M-system

M-system R7L-EC8A Manual de usuario

M-system

M-system R8-FS16N Manual de usuario

M-system

M-system R7D-MS4 Manual de usuario

M-system

M-system R3-RR8 Manual de usuario

M-system

M-system R7HL-DC16B Manual de usuario

M-system

M-system R7D-EC16B Manual de usuario

M-system

M-system R7ML-YV2 Manual de usuario

M-system

M-system R7L-EC8A Manual de usuario

M-system

M-system R7HL-DAC15E Manual de usuario

M-system

M-system R3-NC1 Manual de usuario

M-system

M-system R3-NP1 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario