Lutron Electronics AM-4220 Manual de usuario
Wind speed measurement, pocket type, IP-6
5
CUP ANEMOMETER
Model : AM-4220
Your purchase of this
A
NEMOMETER marks
a step forward for you
into the field o
f
precision
measurement.
A
lthough this METER
is a complex and
delicate instrument,
its durable structure
will allow many years
of use if proper
operating techniques
are developed. Please
read the following
instructions carefully
and always keep this
manual within easy
reach.
OPERATION MANUAL
TABLE OF CONTENTS
1.FEATURES................................................................
.
1
2.SPECIFICATIONS......................................................
.
1
2-1 General Specifications..........................................1
2-2 Electrical Specifications........................................2
3.FRONT PANEL DESCRIPTION..................................... 3
3-1 Cup Vane............................................................3
3-2 Power ( Logger ) Button..................................▲3
3-3 Hold ( Unit )Button........................................
3
3-4 REC ( ) Button...............................................
.
▼3
3-5 LCD Display........................................................
.
3
3-6 Battery Compartment/Cover.................................3
4.INSTALL THE VANE CUP............................................ 4
5.MEASURING PROCEDURE.......................................... 5
5-1 Wind speed measurement....................................5
5-2 Unit change........................................................
.
5
5-3 Data Hold...........................................................
.
6
5-4 Data Record ( Max., Min. reading ).......................6
6.DATA LOGGER..........................................................
.
7
6-1 Save data........................................................... 7
6-2 Call data............................................................. 8
6-3 Delete data ( Empty the memory ).......................
.
9
7.BATTERY REPLACEMENT...........................................
.
10
1. FEATURES
* Cup vane anemometer, available for wind speed
measurement, high reliability.
* Measurement range : 0.9 to 35.0 m/s
* Unit : m/s, km/h, ft/min, knot, mile/h.
* LCD display.
* IP 65, water resistance.
* Microprocessor circuit ensures high accuracy and
provides special functions and features.
* Records Maximum and Minimum readings with recall.
* 100 point data logger with recall.
* Data hold.
* Auto power off saves battery life.
* Operates from DC 1.5V ( UM4/AAA ) x 4 PCs batteries.
* Low-friction ball vane wheels is accurate in both high
and low velocities.
* Durable, long-lasting components, enclosed in strong,
compact ABS-plastic housing.
2. SPECIFICATIONS
2-1 General Specifications
Display LCD size : 28 mm x 19 mm.
Measurement m/S (meters per second)
Unit Km/h ( kilometers per hour )
Knot ( nautical miles per hour )
ft/min ( feet per minute )
mile/h ( miles per hour )
Circuit Custom one-chip of microprocessor LSI
circuit.
1
Data Logger Max. can save 100 point data with recall.
Manual, push the data logger button
once will save data one time.
Sensor Cup van probe with low friction ball
Structure bearing design.
Data Hold Freeze the display reading.
Memory Recall Maximum & Minimum value.
Sampling Time Approx. 1 second.
of display
Power off Auto shut off saves battery life or
manual off by push button.
Operating 0 to 50 .℃
Temperature
Operating Less than 80% R.H.
Humidity
Power Supply DC 1.5 V battery ( UM4/AAA ) x 4 PCs,
Power Current Approx. DC 6.8 mA
Weight 181 g/ 0.4 LB.
@ Battery is included.
Dimension
Main instrument :
190 x 40 x 32 mm (7.5" x 1.6" x 1.3")
Cup vane ( 3 cups with arm ) :
135 mm dia.
Accessories Instruction manual.....................
.
1 PC
Included Carrying case.............................
.
1 PC
2-2 Electrical Specifications (23±5 )℃
Measurement Range Resolution Accuracy
@ reading
m/S 0.9 - 35.0 m/S 0.1 m/S ± ( 2%+0.2 m/S)
Km/h 2.5 - 126.0 Km/h 0.1 Km/h ± ( 2%+0.8 Km/h)
Knot 1.4 - 68.0 Knots 0.1 Knots ± ( 2%+0.4 Knots)
Ft/min 144 - 6895 Ft/min 1 Ft/min ± ( 2%+40 Ft/min)
Mile/h 1.6 - 78.2 Mile/h 0.1 Mile/h ± ( 2%+0.4 Mile/h)
2
3. FRONT PANEL DESCRIPTION
3-1 Cup Vane
3-2 Power ( Logger ) Button▲
3-3 Hold ( Unit )Button
3-4 REC ( ) Button▼
3-5 LCD Display
3-6 Battery Compartment/Cover
3
4. INSTALL THE VANE CUP
Rotate the top
screw in
counter
clockwise
direction until
the screw is
secured.
4
5. MEASURING PROCEDURE
5-1 Wind speed measurement
1)Turn on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ) momentarily.
*
Pressing the " Power Button " ( 3-2, Fig. 1 )
momentarily again will turn off the meter.
2)Uses the hand to hold the meter vertically.
The " Cup Vane " ( 3-1 ) will be rotated, shows the
measured the wind speed value on the " LCD Display "
( 3-5, Fig. 1 ).
5-2 Unit change
1)Meter defaults unit value is " m/s ".
Meter unit value can be changed to " m/s, km/h,
knot, ft/min, mile/h "
2)The method to change the unit :
Press the '" Unit Button " ( 3-3, Fig. 1 ) continuously,
after several seconds the unit will change from m/s,
km/h, knot, ft/min, mile/h " in sequence. Until
reach the desired unit, release the finger from the
" Unit Button " ( 3-3, Fig. 1 ), new unit will saving
into the memory circuit no matter the meter is turned
off.
*
When the display shows " HOLD " ( refer 5-3 )
or " REC " ( refer 5-4 ), it can not change the unit.
5
5-3 Data Hold
* During the measurement, press the " Hold Button "
( 3-3, Fig. 1 ) momentarily to hold the measured
value. The LCD will show a " HOLD " symbol.
* Press the" Hold Button " once again to release the
data hold function.
5-4 Data Record ( Max., Min. reading )
1)The data record function records the maximum and
minimum readings. Press the " REC Button " ( 3-4, Fig.
1 ) momentarily to start the Data Record function,
shows " REC " on the display.
2)With the " REC " symbol on the display.
a)Press the " REC Button " ( 3-4, Fig. 1 ) momentarily,
the " REC MAX " symbol along with the maximum
value will appear on the display.
b)Press the " REC Button " ( 3-4, Fig. 1 ) momentarily
again, the " REC MIN " symbol along with the
minimum value will appear on the display.
* When display shows " REC MAX " or " REC MIN ",
press the " Hold Button " ( 3-3, Fig. 1 )
momentarily will delete the max. ( min. ) value,
the display will show the " REC. " only and
execute the memory function continuously.
c)To exit the memory record function, press the "
REC " button for 2 seconds at least. The display will
revert to the current reading, not show " REC "
6
6. DATA LOGGER
The meter can save max. 100 point data into the
the memory circuit
6-1 Save data
1)Turn on the meter.
2)Press the " REC Button " ( 3-4, Fig. 1 ) momentarily,
shows " REC " on the display.
3)Press the " Logger Button " ( 3-2, Fig. 1 ) momentarily
will save one measuring value to memory, display will
show :
Example :
28 a.The memory position that
72 save the recent data.
b.The memory left space no.
c. a + b = 100
For example : 28 + 72 = 100
4)To exit the memory data logger ( record ) function,
press the " REC " button for 2 seconds at least. The
display will revert to the current reading, not show "
REC
7
6-2 Call data
1)Turn on the meter.
Press the " Hold Button " ( 3-3, Fig. 1 ) momentarily,
LCD shows " HOLD ".
Following, press the " REC Button " ( 3-4, Fig. 1 )
momentarily, display shows :
Example :
28 The total data point that
ttL are saved into the memory.
2)Uses " Button " ( 3-2, Fig. 1 ) or " Button "▲▼
( 3-4, Fig. 1 ) to call the data that already saved into
the memory.
Note :
*
During call the data, the unit display will be flashed.
Example :
1.5
m/s flashing
*Press " Hold Button " ( 3-3. Fig. 1 ) will exit the
data call function.
8
Tabla de contenidos
Otros manuales de Instrumento de medición de Lutron Electronics
Lutron Electronics
Lutron Electronics GC-2028 Manual de usuario
Lutron Electronics
Lutron Electronics DT-2234BL Manual de usuario
Lutron Electronics
Lutron Electronics Radio Powr Sav LRF2-DCRB Instrucciones de instalación y funcionamiento
Lutron Electronics
Lutron Electronics FR-5120 Manual de usuario
Lutron Electronics
Lutron Electronics PM-1064SD Manual de usuario
Lutron Electronics
Lutron Electronics PMS-713 Manual de usuario
Lutron Electronics
Lutron Electronics PMS-713 Manual de usuario
Lutron Electronics
Lutron Electronics LCR-9083 Manual de usuario
Lutron Electronics
Lutron Electronics UVC-254SD Manual de usuario
Lutron Electronics
Lutron Electronics PE-21 Manual de usuario
Lutron Electronics
Lutron Electronics AM-4233SD Manual de usuario
Lutron Electronics
Lutron Electronics MS-7011 Manual de usuario
Lutron Electronics
Lutron Electronics VB-8206SD Manual de usuario
Lutron Electronics
Lutron Electronics DO-5512SD Manual de usuario
Lutron Electronics
Lutron Electronics vt-8204 Manual de usuario
Lutron Electronics
Lutron Electronics FORCE GAUGE FG-6100SD Manual de usuario
Lutron Electronics
Lutron Electronics CO2-9914SD Manual de usuario
Lutron Electronics
Lutron Electronics DS-2013SD Manual de usuario
Lutron Electronics
Lutron Electronics WA-2015 Manual de usuario
Lutron Electronics
Lutron Electronics SP-82AC Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario