Lovibond SD 90 Manual de usuario

SD 90

Salt

Lock/Unlock Data!

C. Backlight ON/OFF

____________________________________________________________________________________________

Note: Icons/Characters in RED meaning "BLINK"

: Hit once / : Press and hold / : Release

F. Store Data

1. In lock mode: 2s

2. In measurement mode: 2s (or 2s )

3. When the storage is full, it will overwrite the oldest data.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

G. System Setup

Menu selection:

2s (latest memory#)

(7.00 or 6.86) (dd-mm-yy/24hr or mm-dd-yy/12hr) (°C or °F)

(31-12 24 or 12-31 12ampm) .....

To enter:

MEASUREMENT

Salt CALIBRATION

Characters in RED represent „Flashing symbols“.

Remove protective cap from the probe

D. Store Data

Press

Press for

3 seconds

Press and

hold

1 2 3

4 5 6

Insert the batteries

unlock

off

unlock

off

Automatically turns off after 8 minutes of

inactivity.

Possible slight delay after pressing

before freeze of the data (!).

After 3 sec. the ﬁle no. temporarily appears

on the display, e.g. 01.

Once the storage has reached max. capacity,

the data will overwrite the oldest ﬁles.

off

lock

• Re-Calibrate according to individual recommendations! Rinse the electrode

with destilled water after each measurement.

• If temperature is out of range, „ERR“ will appear. Meter automatically returns to Measurement Mode.

• If the default reading is more than 30% out of standard buffer range, „ERR“ will appear.

Remove protective cap from the probe.

Power ON (see A)

Immerse the probe

into calibration

solution.

wait

Immerse the probe into

calibration solution.

E. Calibrate Salt

Auto-recognition for : 100~1000 ppm and : 1.00~20.00 ppt

to increase (+):

to store

to decrease (-):

To decrease (-)

Adjustment:

∞

to increase (+):

V. Set Data/Time display type

VI. Electrode Replacement

SETUP

I. Recall Data

II. Select Unit (% or ppt/ppm)

III. Set Date and Time

IV. Set Temperature system (°C/°F)

3 sec

Minutes

24 h

Hours

Year

Month

Day

Month

F. System Setup

Unfreeze data rst (see frontside B) before Menu selection.

Delete stored data.

Automatic Exit

Select V. `Set Data/ Time display type‘ ﬁrst.

to increase (+);

am/pm 12 hour clock

24 hour clock

new electrode

to decrease (-)

am/pm

12 hour clock

or 24 hour

clock

Adjustment:

Press for

further ﬁles. Exit

Exit

°C °C

select select

°F

123

4 5 6

Content

1 Salt Meter SD 90 in a robust

plastic case with strap

2 Batteries

1 Instruction Manual

Code: 19 48 04

Instruction manuals available in further languages, visit www.lovibond.com

Accessories

195 00 17 Battery CR 2032 (2 Batteries required)

19 48 22 Replacement electrode

38 48 01 Beaker, 100 ml

Exit

Characters in RED represent „Flashing symbols“.

Recall Data

go to l.

Set Temperature

go to lV.

Select Unit

go to ll.

Set Data/Time display

type go to V.

Set Date and Time

go to lll.

To enter.

3 sec

Error Code and Actions

Description Range Actions

1Electrodenotinstalledorbad Thermistor:0.5~100kΩ Installorreplaceelectrode

2 Not used

3 Temperature out of range 0~60°C Bring solution to the temperature within range

4 Not used

5 Calibrated value out of range 70 %-130 % (compare Re-calibrate or replace the electrode or use

to the default value) the default value (remove batteries)

6 Salt out of range <20.00ppt (2.00%) Use other solution

Error Code and Actions

Description Range Actions

1Electrodenotinstalledorbad Thermistor:0.5~100kΩ Installorreplaceelectrode

2 Not used

3 Temperature out of range 0~60°C Bring solution to the temperature within range

4 Not used

5 Calibrated value out of range 70 %-130 % (compare Re-calibrate or replace the electrode or use

to the default value) the default value (remove batteries)

6 Salt out of range <20.00ppt (2.00%) Use other solution

SD 90 Salt Specications/Features

1 Operating range: 0~60°C, <20.00ppt(2.00%)

2 Automatic switch over ppm and ppt. ppm:0~999ppm; ppt:1.00~20.00ppt (when set to ppt/ppm unit)

3 Up to 2 points manual mode calibration, +/-50% adjustable value

4 Salt resolution: 0.01% (when set to „P“% unit); Accuracy: ±3%FS

5 Salt resolution: 1ppm(<=999ppm) and 0.01ppt(1.00~20.00ppt) (when set to ppt/ppm unit); Accuracy: ±3%FS

6 Temperature resolution: 0.1°C; Accuracy: ±1°C , Selectable °C/°F system

7 Selectable unit system („P“% or ppt/ppm)

8 Time and date display/stamp with 25 sets of data storage (non-volatile)

9 22x22mm LCD screen, with Yellow Green backlight

10 2x CR2032 batteries

11 Auto-power off to save battery (8 minutes non-use)

Otros manuales de Instrumento de medición de Lovibond

Lovibond

Lovibond MD200 Manual de usuario

Lovibond

Lovibond SD 400 Oxi L Manual de usuario

Lovibond

Lovibond Maxi Direct Manual de usuario

Lovibond

Lovibond SWIMTEC MD100 Manual de usuario

Lovibond

Lovibond SensoDirect pH110 Manual de usuario

Lovibond

Lovibond Tintometer SensoDirect Salt110 Manual de usuario

Lovibond

Lovibond Tintometer MD100 Manual de usuario

Lovibond

Lovibond CheckitDirect Manual de usuario

Lovibond

Lovibond SensoDirect Con200 Manual de usuario

Lovibond

Lovibond MD 100 Manual de usuario

Lovibond

Lovibond EC 2000 Gardner Instrucciones de montaje

Lovibond

Lovibond Tintometer SensoDirect Con110 Manual de usuario

Lovibond

Lovibond TR 515 Instrucciones de montaje

Lovibond

Lovibond MicroDirect pH10 Manual de usuario

Lovibond

Lovibond SensoDirect Oxi200 Manual de usuario

Lovibond

Lovibond PM 620 Manual de usuario

Lovibond

Lovibond MD 610 Manual de usuario

Lovibond

Lovibond CheckitDirect Manual de usuario

Lovibond

Lovibond CheckitDirect Manual de usuario

Lovibond

Lovibond Tintometer XD 7500 Manual de usuario

Lovibond

Lovibond LC 100 Manual de usuario

Lovibond

Lovibond TG 60/268 Instrucciones de montaje

Lovibond

Lovibond SD 320 Con Manual de usuario

Lovibond

Lovibond PFX995 Series Instrucciones de montaje

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario