LINSHANG LS110H Manual técnico

Shenzhen Linshang Technology Co., Ltd.

1-4-2019 Page 1 of 3

LS110H split transmission meter

Operation instruction V1.1

LS110H is able to simultaneously measure and display UVR(Ultra Violet Rejection),

IRR(Infrared Rejection) and VLT(Visible Light Transmission) value.

LS110H consist of two parts: main part(PART Ⅰ)for measuring and displaying

functions and the auxiliary part(PARTⅡ) for light source and laser light for alignment.

I. LS110H Parameters

1. Dimension: 130mm × 70mm ×84mm (L ×W × H)

2. Weight: 630g

3.Resolution: 0.1% for measured value<10%

and 1% for other ranges

4.Accuracy: better than ±2% (Colorless and

transparent material)

5. Test sample size: > 40mm × 40mm

6. VL Peak wavelength: 550nm

7. UV Peak wavelength: 365nm

8. IR Peak wavelength : 1400nm

9. Power supply: built-in lithium rechargeable

battery

II．Key Operation

1．Power on/off

Short press "Power" key to power the instrument on/off，main and auxiliary part are

required to perform the operation of power on/off.

The meter is shut down automatically for no action within 15 minutes.

2. “HOLD” Key of the main part

Under the measurement mode, short press "HOLD" to hold the data on LCD, the icon

"HOLD" will display on the LCD .

Short press "HOLD" again to release the hold mode and the icon "HOLD" disappears.

3.”Laser”key of the auxiliary part

Short press "Laser" key to power the laser on/off.

III. Instrument operation

1. SELF-TEST

Attracting the main and auxiliary part together, press down “POWER" key to power

them respectively and align the upper and lower laser points with the alignment bull’s

eyes simultaneously. Wait for the completion of “SELF-TEST” and enter the

measurement interface(VLT 100% ,IRR and UVR 0% displayed on the LCD). The

following reasons for failed “SELF-TEST” (“Please refer to the manual” display on the

LCD) :

a) Battery power is low, please charge the main and auxiliary part.

b) No alignment the main and auxiliary part with laser point with the bull’s eyes.

c) Power on the main and auxiliary part with clamped some testing sample

Shenzhen Linshang Technology Co., Ltd.

1-4-2019 Page 2 of 3

d) Equipment damage, need to send back to the factory repair

2. Measurement

Clamp the sample with the main part and the auxiliary part and align the laser point with

the bull’s eyes. The meter will display the transmission(Rejection) value of the samples.

IV. Features

1. Two-parts dual mode of the main and auxiliary part facilitates the transmission

measurement of the automobile front windshield glass and building glass.

2. UV rejection, IR rejection, Light Transmittance Meter, Three function in ONE device.

3. The built-in lithium rechargeable battery is easy to use without replacing the battery.

4. The laser alignment function guarantees the accurate alignment of the main part with

the auxiliary part in the process of measurement and ensures accurate measurement.

V. Battery charging

This meter has built in lithium chargeable battery and

charger. Three methods can be used for charging the

meter.

1. Plug the USB line into the USB port of computer.

Plug in a one-for-two plug to charge the main and

auxiliary part simultaneously.

2. Use the supporting DC 5V Adapter. Plug in a

one-for-two plug to charge the main and auxiliary part

simultaneously.

3. Use the mobile power of the smart phone for

charging.

VI. Points for attention

1. Since the main and auxiliary part has strong magnetic magnet inside for

measurement, avoid pinch hands or damage the glass samples in the use.

2. The laser position and accuracy of each set of meter (main and auxiliary part) has

been perfectly matched and calibrated.

Shenzhen Linshang Technology Co., Ltd.

1-4-2019 Page 3 of 3

3. Charge the meter promptly when the battery indicator flashes.

4. The meter may not power on due to possible low power. In such case, please charge

it for a while before starting up.

5. Please use the dedicated supporting charger.

6. In order to ensure the accuracy of the measured value, please do not expose the

meter to the direct sunlight during the use.

7. The meter uses standard 14500 lithium chargeable

battery. In case of ineffective operation of key after

charging, please open the meter with screwdriver,

take out the chargeable battery and re-install it. In

case of short use after charging, please replace the

chargeable battery.

8.This product emits a laser beam from the back side of auxiliary part. DO NOT point the

laser at anyone’s eyes.

VII: Standard Packing List

No. Description Quantity Unit

1 LS110H split transmission meter 1 pcs

2 User Manual 1 pcs

3 Certificate / warranty card 1 pcs

4 Charger 1 pcs

VIII: Service

1．The meter has one-year warranty. If the meter works abnormally, please

send the whole meter to the company for maintenance

2．Provide users with spare parts and lifelong maintenance services

3．Provide the users with the meter inspection service for free

4．Free technical support for long term

Manufacturer: Shenzhen Linshang Technology Co.,Ltd.

Website: www.linshangtech.com

Service hotline: 086-755-86263411

Email: [email protected]

Tabla de contenidos

Otros manuales de Instrumento de medición de LINSHANG

LINSHANG

LINSHANG LS162A Manual de usuario

LINSHANG

LINSHANG LS171 Manual de usuario

LINSHANG

LINSHANG LS125 Manual de usuario

LINSHANG

LINSHANG LS220B Manual de usuario

LINSHANG

LINSHANG LS132 Manual de usuario

LINSHANG

LINSHANG LS108 Manual de usuario

LINSHANG

LINSHANG LS137 Manual de usuario

LINSHANG

LINSHANG LS300 Manual de usuario

LINSHANG

LINSHANG LS196 Manual de usuario

LINSHANG

LINSHANG LS236 Manual de usuario

LINSHANG

LINSHANG LS133 Manual de usuario

LINSHANG

LINSHANG LS120 Manual de usuario

LINSHANG

LINSHANG LS190 Manual de usuario

LINSHANG

LINSHANG LS201 Manual de usuario

LINSHANG

LINSHANG LS108A Manual de usuario

LINSHANG

LINSHANG LS252DL Manual de usuario

LINSHANG

LINSHANG LS160A Manual de usuario

LINSHANG

LINSHANG LS212 Manual de usuario

LINSHANG

LINSHANG LS191 Manual de usuario

LINSHANG

LINSHANG LS192 Manual de usuario

LINSHANG

LINSHANG LS193 Manual de usuario

LINSHANG

LINSHANG LS230 Manual de usuario

LINSHANG

LINSHANG LS110A Manual técnico

LINSHANG

LINSHANG LS128 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario