LINSHANG LS120 Manual de usuario

Shenzhen Linshang Technology Co., Ltd.

7-29-2020 Page 1 of 8

LS120

UV Energy Meter

User Manual V8.01

Please read this manual carefully before using and reserve it for reference.

Shenzhen Linshang Technology Co., Ltd.

7-29-2020 Page 2 of 8

I. Product Introduction

UV energy meter can measure UV energy, UV intensity and temperature at the same time. It is suitable

for UV energy, UV intensity and temperature detection of UV curing machines, UV dryers, mobile phone

UV coating machines, exposure machines, printing machines and other equipment. This meter is suitable

for measuring the UV intensity and UV energy of ultraviolet light in high-pressure mercury lamps, halogen

lamps and other light sources.

II. Parameters

1. Spectral range: 315nm ~ 400nm λp = 365nm

2. Irradiance measuring range: 0 ~ 2000mW/cm

3. Irradiance resolution: 0.1mW/cm

4. Energy measuring range: 0 ~ 999999mJ/cm2

5. Energy measuring accuracy: ±10%, ±5% (typical)

6. Temperature measuring range: -55°C ~ +125°C

7. Sampling speed: 2048 times/second

8. Irradiance data storage interval: 2 times/second

9. Temperature data storage interval: 2 times/second

10. Recording period: 32 minutes

11. Power supply: 2 AAA alkaline dry batteries

12. Display: 240*160 Dot matrix LCD

13. Dimension: Diameter 120mm * thickness 13 mm

14. Weight: 327g

III. Spectral response curve

Shenzhen Linshang Technology Co., Ltd.

7-29-2020 Page 3 of 8

IV.Characteristics of Meter

1. It is the real smart UV energy meter with a large LCD to display the temperature and irradiance curve

directly.

2. It is equipped with a USB port and the computer software can read the detailed record data,

generating data curve and print out test reports.

3. It is with a high precision fast response temperature sensor and can measure the real temperature in

the curing machine dynamically.

4. It is with a built-in heat resisting sheet, can resist high temperature and operate at 100°C for long

time.

5. The meter is with a built-in large memory and can record irradiance data up to 60,000 and

temperature data up to 3800.

6. The stored data will not be lost when the power is off and the last test data will be displayed

automatically when power is on; the test data can only be deleted manually.

7. It is with high accuracy and has passed many tests of authoritative testing organizations and got

certificates.

8. It is with a built-in timer, and can record the UV curing time accurately.

V. Operation

1. Parameter setting

In OFF mode, long press the “POWER” button and go to the setting mode: In the setting mode, “SELECT”

button is for selection and “POWER” button is for confirmation.

A. Trigger mode: Auto/Manual

Short press the “SELECT” button and select Auto/Manual

Select Auto, the automatic trigger mode, when the power value is greater than the selected trigger value,

the measurement is automatically started.

Select Manual, short press the “POWER” button start a measurement and end a measurement.

Short press the “POWER” button to confirm and start another setting. Choose “Auto”, the meter enters the

trigger power value setting interface; Select Manual, the meter enters the smooth setting interface.

Note: For the recording time is only 32 minutes, if the production line is very long and need a long time to

reach the UV Lamp position, the “AUTO” mode must be selected.

B. Trigger power: 0.5-5mW/cm²can be set

Shenzhen Linshang Technology Co., Ltd.

7-29-2020 Page 4 of 8

Short press the “SELECT” button to set the trigger power value and you can long press the button for

quick setting.

Short press the “POWER” button to confirm the setting and the meter enters the smooth interface.

C. Smooth processing

If the UV light source usesAC power supply, the frequency of the AC power will affect the accuracy of the

power measurement. Short press the "SELECT" button to select the power frequency of the light source.

OFF: this option can be selected if no smooth processing will be performed and the UV lamp is

powered with direct current

50HZ: this option must be selected if frequency of the alternating current is 50HZ

60HZ: this option must be selected if frequency the alternating current is 60HZ

D. Factory default settings

Trigger mode: Manual

Smooth: 50HZ

2. ON/OFF

1) In POWER OFF state, short press “POWER” button to power on the meter. After turning on the meter,

the meter displays the calibration coefficient, version number, serial number, etc. and then enters the

last measurement interface (STOP interface).

In the “STOP” interface, long press the “POWER” button to power off the meter.

2) In the “STOP” interface, the meter will automatically power off in 3 minutes without any operation.

3) In the automatic trigger measurement “Ready” state, the longest waiting time is 50 minutes. If the

measurement cannot be triggered within 50 minutes, it will automatically turn off.

3. Measurement

In the measurement mode, three operation states exist:

Shenzhen Linshang Technology Co., Ltd.

7-29-2020 Page 5 of 8

READY: Ready state; in the auto trigger mode, this means the meter is waiting for triggering to begin

a measurement.

RUN: Measuring state; this means the meter is collecting data.

STOP: Stop state, this means the data measurement finished.

In measurement mode, 4 kinds of display modes can be selected by using the “SELECT” button:

MAX: Maximum value (including the maximum value of energy, irradiance and temperature)

RT: Real-time value (including time, irradiance and temperature)

Irradiance curve: (Can only view in the “STOP” state)

Temperature curve: (Can only view in the “STOP” state)

1) Manual measurement mode: in the STOP interface. Short press the "POWER" button and then

short press the "SELECT" button to confirm the new measurement, clear the historical data (display

"-----"), automatically enter the measurement interface (RUN state) after 1s. Short press the

"POWER" button or after 32 minutes, the measurement is over and enter the STOP interface.

2) Automatic mode: After pressing the button to confirm the new measurement, the meter enter the

READY state to clear the historical data and wait for the trigger condition (Trigger power) to be met,

the energy display "----" and flashing. When the power value is greater than the set trigger power, the

trigger condition is met, enter the measurement interface (RUN state). When the recording time

reaches 32 minutes or the power value is less than the set trigger power, the measurement is

automatically ended and enters the STOP interface.

4. The last measurement data view

In the stop status, the interface displays the maximum value of the last measurement.

The maximum value, real-time value, irradiance curve and temperature curve can be viewed by pressing

"SELECT" button.

Shenzhen Linshang Technology Co., Ltd.

7-29-2020 Page 6 of 8

In the stop status, long press the " SELECT " key to clear the current test data.

5. USB communication

This meter has the function of 32-minutes data recording.

Recording period: 32 minutes

Irradiance data storage interval: 32 times /s, up to 61440 irradiance record data.

Temperature data storage interval: 2 times/s, up to 3840 temperature data

In the “STOP” mode, all recording data in the meter can be read, the curves can be displayed, data can

be exported into EXCEL and reports can be printed with the PC software.

VI.PC Software of Meter

The meter is equipped with a USB communication port and it can be connected to the computer with

plugging in the USB cable and starting the special PC software, and the data in the meter can be read.

The software has various functions, such as parameter configuration, data reading, UV irradiance curve

and temperature curve display, data irradiance export into EXCEL, temperature data export into EXCEL

and report generation.

The report generation and printing function should be specially explained. For test data, the software can

Shenzhen Linshang Technology Co., Ltd.

7-29-2020 Page 7 of 8

generate a report automatically and print, and if a PDF printer is installed, the electronic version report

can be printed in PDF format. This is convenient for the recording and archiving of test data.

Record data can be read by connect USB cable with computer directly (when the meter is connected to

the computer with USB port for the first time, you will be prompted to restart the computer so as to PC

load the driver automatically). Currently, the software supports Windows system.

VII. Notes

1. The meter sensor is at the back of meter

2. When not in use, please turn off the meter

3. Avoid contact with corrosive materials and keep away from high humidity.

4. Please put it in the specialized package after power-off and keep properly.

5. The suggested calibrating period is one year, and our company has the standard light source and

provides calibration service. (The previous calibration time “Calibration: year/month/day”will be

displayed on the boot screen.)

6. For the UV sensor is very sensitive to humidity, the storage environment is very important. For a long

time storage, please be sure to keep the meter in dry environment.

Shenzhen Linshang Technology Co., Ltd.

7-29-2020 Page 8 of 8

VIII. Packing list

No.

Description

Quantity

Unit

UV Energy Meter

pcs

USB cable

pcs

Software USB flash disk

pcs

AAA battery

pcs

Small cross screwdriver

pcs

User Manual

pcs

Certificate/Warranty card

pcs

Plastic Case

pcs

IX.Service

1. The meter has one-year warranty. If the meter works abnormally, please send the whole meter to the

company for maintenance.

2. Provide users with spare parts and lifelong maintenance services.

3. Provide the users with the meter inspection service for free.

4. Free technical support for long term.

Manufacturer: Shenzhen Linshang Technology Co.,Ltd.

Website: www.linshangtech.com

Service hotline: 086-755-86263411

Email: sales21@linshangtech.com

Tabla de contenidos

Otros manuales de Instrumento de medición de LINSHANG

LINSHANG

LINSHANG LS108A Manual de usuario

LINSHANG

LINSHANG LS212 Manual de usuario

LINSHANG

LINSHANG LS130 Manual de usuario

LINSHANG

LINSHANG LS232 Manual de usuario

LINSHANG

LINSHANG LS125 Manual de usuario

LINSHANG

LINSHANG LS110A Manual técnico

LINSHANG

LINSHANG LS137 Manual de usuario

LINSHANG

LINSHANG LS230 Manual de usuario

LINSHANG

LINSHANG LS170 Manual de usuario

LINSHANG

LINSHANG LS200 Manual de usuario

LINSHANG

LINSHANG LS192 Manual de usuario

LINSHANG

LINSHANG LS136 Manual de usuario

LINSHANG

LINSHANG LS195 Manual de usuario

LINSHANG

LINSHANG LS133 Manual de usuario

LINSHANG

LINSHANG LS220 Manual de usuario

LINSHANG

LINSHANG LS132 Manual de usuario

LINSHANG

LINSHANG LS196 Manual de usuario

LINSHANG

LINSHANG LS182 Manual de usuario

LINSHANG

LINSHANG LS108 Manual de usuario

LINSHANG

LINSHANG LS110 Manual de usuario

LINSHANG

LINSHANG LS108H Manual de usuario

LINSHANG

LINSHANG LS213 Manual de usuario

LINSHANG

LINSHANG LS300 Manual de usuario

LINSHANG

LINSHANG LS233 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario