Linksys WAP54G - Wireless-G Access Point Manual de usuario

A Division of Cisco Systems, Inc.

Model No.

Wireless Quick Installation Guide

Wireless

Model No.

Quick Installation Guide

WAP54G (EU/LA/UK)

Access Point

Wireless-G

Package Contents

• Wireless-G Access Point

• Detachable Antennas

• Power Adapter

• Setup CD with User Guide

• Ethernet Network Cable

• Quick Installation (some models

may only have the Quick Installation

on the Setup CD)

GHz

802.11g

AConnect your Ethernet network

cable to your network router or

switch. Then connect the other

end of the network cable to

the Access Point’s LAN

(Ethernet network) port.

BConnect the included power

adapter to the Access Point’s

Power port. Then plug the

power adapter into an

electrical outlet. The LEDs on

the front panel will light up as

soon as the Access Point

powers on.

Connecting the Access Point

AInsert the Setup CD into your

PC's CD-ROM drive. The Setup

Wizard should run

automatically, and the

Welcome screen should

appear. If it does not, click Start

and select Run. Enter

D:\setup.exe (if “D” is the letter

of your PC's CD-ROM drive).

BOn the Welcome screen, click

Click Here to Start.

CThe following screens display

how the Access Point should

be connected during this

Setup Wizard. Optimally, you

should set up the Access Point

using a PC on your wired

network. Click Next.

DCheck the cable connecting

the Access Point to your

network router or switch. Click

Next.

EMake sure the Access Point is

powered on. Click Next.

Configuring the Access Point

FMake sure the Access Point’s

Power, Act, and Link LEDs are lit.

If they are not, check the

cable connections. Click Next.

GThe Setup Wizard will search for

the Access Point within your

network and display a list of all

access points. If more than

one are displayed, select the

Access Point by clicking on it.

Then click Yes to change its

settings.

HYou will be asked to sign onto

the Access Point you have

selected. Enter the default

password, admin. Then click

Enter.

IEnter a descriptive name in the

Device Name field and then

create a new password.

If your network router will

automatically assign an IP

address to the Access Point,

then select Automatic-DHCP.

If you want to assign a fixed IP

address to the Access Point,

then select Static IP. Enter an IP

Address, Subnet Mask, and the

IP address of your network

gateway (usually your router).

Then click Next.

JThere are two ways to

configure the Access Point’s

wireless settings.

If you have other

SecureEasySetup devices, then

proceed to “SecureEasySetup.”

Otherwise, proceed to

“Manual Configuration.”

SecureEasySetup

aLocate the SecureEasySetup

button for your devices. (You

can only add one device at a

time.)

bPress the Access Point’s Cisco

logo for only one second and

then release it.

cWait five to ten seconds. When

the logo turns white and begins

to flash, press the

SecureEasySetup button on

another device. The Access

Point’s Cisco logo will stop

flashing when the device has

been configured.

dRepeat steps b and c to add

more SecureEasySetup

devices.

eWhen you are finished, click

Next on the Configure Wireless

Settings screen.

NOTE: SecureEasySetup uses

WPA-Personal encryption. If your

current wireless devices do not

support WPA-Personal security,

then you cannot use

SecureEasySetup. You will need

to manually configure your

network security using the

encryption supported by your

existing devices.

NOTE: If you accidentally press

the Cisco logo for five to eight

seconds, then the Access Point’s

SSID and WPA-Personal settings

will be changed, and you will have

to re-configure all of your

wireless client devices.

NOTE: If you have already set up

your network using your router’s

SecureEasySetup feature, then

you cannot use the Access Point’s

SecureEasySetup feature. You

must manually configure the

Access Point’s wireless settings

to match your existing network’s

settings.

fReview the new settings, and

click Yes to save them.

NOTE: Write down these

settings. You may need

to manually configure

non-SecureEasySetup

devices in the future.

gClick Online Registration to

click Exit to end the Setup

Wizard.

Congratulations! The installation of

the Wireless-G Access Point

is complete.

Manual Configuration

aOn the Configure Wireless

Settings screen, click Enter

Wireless Settings Manually.

bEnter the SSID or name of your

wireless network. Then select

the operating channel for your

network.

Select the mode for your

network. If you have 802.11g

devices only, select G-Only. If

you have 802.11g and

802.11b devices, keep the

default, Mixed Mode.

Click Next.

cSelect the level of security you

want to use: WEP, WPA/WPA2

Personal, WPA-Enterprise, or

Linksys Wireless Guard. Click

Next.

dFollow the appropriate

instructions.

WEP - Select the level of

encryption you want to use,

WEP (64-bit) or WEP (128-bit).

Enter a passphrase to

automatically generate a WEP

key, or manually enter the WEP

key in the Key 1 field.

NOTE: The WEP key can consist

of the letters “A” through

“F” and the numbers “0”

through “9”. It should be

10 characters in length

for 64-bit encryption or

26 characters in length

for 128-bit encryption.

Then click Next.

WPA/WPA2 Personal - Select

WPA Personal. Select TKIP or

AES for your encryption

method. Enter a passphrase of

8 to 32 characters and then

click Next.

WEP

WPA Personal

WPA2 Personal - Select WPA2

Personal. AES is automatically

selected as your encryption

method. Enter a passphrase of

8 to 32 characters and then

click Next.

WPA2 Mixed Mode - Select

WPA2 Mixed Mode. TKIP + AES

is automatically selected as

your encryption method. Enter

a passphrase of 8 to 32

characters and click Next.

WPA-Enterprise or Linksys

Wireless Guard - Refer to the

User Guide on the Setup CD for

more information.

eReview the new settings, and

click Yes to save them.

fClick Online Registration to

click Exit to end the Setup

Wizard.

Congratulations! The installation of

the Wireless-G Access Point

is complete.

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

Product Registration

http://www.linksys.com/registration

WAP54G v3-QIG-EU-LA-UK-50715 KL

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

WPA2 Personal

WPA2 Mixed Mode

NOTE: For advanced configuration, use

the Access Point’s Web-based Utility.

Refer to the User Guide on the CD-ROM

for more information.

A Division of Cisco Systems, Inc.

Modelnr.

Trådløs Installationsvejledning

Wireless

Modelnr.

Installationsvejledning

WAP54G (DK)

Access point

Trådløs-G

Pakkens indhold

• Trådløs-G Access point

• Aftagelige antenner

• Strømforsyning

• Installations-cd med brugervejledning

• Ethernet-netværkskabel

• Installationsvejledning (til nogle modeller

findes installationsvejledningen kun på

installations-cd-rom'en)

GHz

802.11g

ATilslut Ethernet-kablet til

netværksrouteren eller

switchen. Slut derefter den

anden ende af netværkskablet

til access point'ets LAN-port

(Ethernet-netværksport).

BSlut strømforsyningen til

strømstikket på det trådløse

access point. Slut derefter

strømforsyningen til en

stikkontakt. Lysdioderne på

frontpanelet lyser, så snart

access point'et er tændt.

Tilslutning af access point'et

Otros manuales para WAP54G - Wireless-G Access Point

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Linksys

Linksys

Linksys WAP2000 Manual de operación

Linksys

Linksys WAP54G - Wireless-G Access Point Manual de operación

Linksys

Linksys WAP54GPE - Wireless-G Exterior Access Point Manual de usuario

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manual de usuario

Linksys

Linksys WAP4400N Manual de operación

Linksys

Linksys WAP51AB - Instant Wireless - Access Point Manual de usuario

Linksys

Linksys WAP51AB - Instant Wireless - Access Point Instrucciones de funcionamiento originales

Linksys

Linksys LAPN600 Manual de usuario

Linksys

Linksys WAP4410N Manual de usuario

Linksys

Linksys LAPAC1750 Manual de usuario

Linksys

Linksys WAP54GP - Wireless-G Access Point Manual de operación

Linksys

Linksys LAPN600 Manual de usuario

Linksys

Linksys Instant Wireles Series Manual de usuario

Linksys

Linksys AC1200 Manual de usuario

Linksys

Linksys WAP54GPE - Wireless-G Exterior Access Point Manual de operación

Linksys

Linksys WAP54A - Instant Wireless - Access Point Manual de usuario

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manual de usuario

Linksys

Linksys Instant Wireless Series WAP54G Manual de usuario

Linksys

Linksys LAPAC2600 Manual de usuario

Linksys

Linksys WAP200 Manual de usuario

Linksys

Linksys WAP300N Manual de usuario

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manual de usuario

Linksys

Linksys EtherFast Instant Broadband BEFW11S4 Manual de usuario

Linksys

Linksys WAP54G - Wireless-G Access Point Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario