Linksys RV042 Instrucciones de funcionamiento originales

Model No.

Quick Installation

A Division of Cisco Systems, Inc.

Model No.

WIRED

RV042

VPN Router

10/100 4-Port

Package Contents

• 10/100 4-Port VPN Router

• User Guide CD-ROM

• AC Power Adapter

• Quick Installation

• Registration Card

ABefore you begin, make sure

that all of your hardware is

powered off, including the

Router, PCs, hubs, switches,

and cable or DSL modem.

BConnect one end of an Ether-

net network cable to one of

the numbered ports on the

back of the Router (see Figure

B). Connect the other end to

an Ethernet port on a network

device, e.g., a PC, print server,

hub, or switch.

Repeat this step to connect

more PCs or other network

devices to the Router.

CConnect your cable or DSL

modem’s Ethernet cable to

the Router’s Internet port. If

using the DMZ/Internet port,

connect a second cable to it,

and the other end to the net-

work device , e.g., modem or

public server. See Figure C.

DPower on the cable or DSL

modem and the other network

device if using one.

Connect the Router

In Step 2, you will need the setup

instructions provided by your Inter-

net Service Provider (ISP). If you do

not have this information, then con-

tact your ISP before proceeding.

The instructions from your ISP tell you

how to set up your PC for Internet

access. Because you are now using

the Router to share Internet access

among several computers, you will

use the setup information to config-

ure the Router instead of your PC.

AOpen your PC’s web browser.

Enter http://192.168.1.1 (the

Router’s default local IP

address) in the web browser ’s

Address field. Then press the

Enter key.

BA screen will appear and ask

you for a User Name and Pass-

word. Enter admin (the default)

in the the User Name and Pass-

word fields. Then click the OK

button.

CThe Router’s Web-based Utility

will appear with the System

Summary screen showing.

Click on the Setup tab, which is

the next tab over, then con-

Configure the Router

EConnect the included AC

power cable to the Router’s

Power port on the side of the

Router, as shown in Figure E,

and then plug the other end of

the power cable into an elec-

trical outlet.

The System LED on the front

panel will light up as soon as

the power adapter is con-

nected properly.

NOTE:: Make sure your PC’s Ethernet

adapter is set to obtain an IP address

automatically. For more information,

refer to Windows Help.

Internet

DMZ/Internet

FIn the drop-down menus for

WAN1 and WAN2, the WAN

Connection Type setting fea-

tures four Internet connection

types: obtain an IP automati-

cally, Static IP, PPPoE, and PPTP.

Depending on which connec-

tion type you select, the fea-

tures available on the Network

page of the Setup screen will

differ. Proceed to the instruc-

tions for the connection type

you are using.

1 Obtain an IP Automatically

aIf your ISP says that you are

connecting through DHCP or a

dynamic IP address from your

ISP, then select Obtain an IP

automatically as the WAN

Connection Type. If you also

select Use the Following DNS

Server Addresses, enter a spe-

cific DNS Server IP Address.

bClick the Save Settings button,

and go to Step G.

2StaticIP

aIf your ISP says that you are

connecting through a static or

fixed IP address from your ISP,

then select Static IP as the

WAN Connection Type.

bEnter the WAN IP Address, Sub-

net Mask Default Gateway

tinue with the instruction,

below, to complete the Net-

work page.

DDepending on the setup infor-

mation from your ISP, you may

need to provide a host name

and domain name for the

Router. The Host Name and

Domain Name fields are usu-

ally left blank. If requested by

your ISP (usually cable ISPs),

complete these two fields.

EChoose the function of the

DMZ/Internet (WAN2) port. If the

port will be used as a second

Internet port, select Dual WAN.

If the port will be used as a

DMZ port, select DMZ.

fGo to Step G.

4PPTP

PPTP is a service used in Europe and

Israel only. IF you are using a PPTP

connection, check with your ISP for

the necessary setup information.

When you are finished, go to Step G.

GIf you haven’t already done so,

click the Save Settings button.

Then, close the web browser.

HPower your cable or DSL

modem off and back on

again.

IRestart or power on your PCs so

they can obtain the Router’s

new settings.

JTo test the Router’s settings,

open your web browser from

any computer. In the browser’s

Address field, enter

www.linksys.com/registration

and press the Enter key.

Congratulations! The installation of

the Router is complete.

Address, and DNS Server pro-

vided by your ISP.

cIn the DNS Server fields, enter

the DNS address(es) provided

by your ISP. You need to enter

at least one DNS address.

dClick the Save Settings button,

and go to Step G.

3PPPoE

aIf your ISP says that you are

connecting through PPPoE or if

you normally enter a user

name and password to access

the Internet, then select PPPoE

as the WAN Connection Type.

bEnter the User Name and Pass-

word provided by your ISP.

cIf you select Connect on

Demand, the PPPoE connec-

tion will be disconnected if it

has been idle for a period

longer than the Max Idle Time

setting.

dIf you select Keep Alive, the

Router will keep the connec-

tion alive by sending out a few

data packets at the Redial

Period, so your Internet service

thinks that the connection is still

active.

eClick the Save Settings button.

RV042-QI-40514NC BW

For additional information or troubleshooting

help, refer to the User Guide CD-ROM. You

can also call or e-mail for further support.

24-hour Technical Support

800-326-7114

(toll-free from US or Canada)

E-mail Support

[email protected]

Website

http://www.linksys.com or

http://support.linksys.com

RMA (Return Merchandise Authorization)

http://www.linksys.com/support

FTP Site

ftp://ftp.linksys.com

Sales Information

800-546-5797 (800-LINKSYS)

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

Model No.

Otros manuales para RV042

Tabla de contenidos

Otros manuales de Enrutador de red de Linksys

Linksys

Linksys Velop WHW01 Manual de usuario

Linksys

Linksys WET11 - Instant Wireless EN Bridge Network... Instrucciones de funcionamiento originales

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Manual de usuario

Linksys

Linksys MAX-STREAM EA8100 V2 Manual del propietario

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Manual de usuario

Linksys

Linksys EA4500 Manual de usuario

Linksys

Linksys EtherFast EF4116 Manual de usuario

Linksys

Linksys WRT54GV2 Manual de usuario

Linksys

Linksys PC22604 - ProConnect II 2604 Switch Manual de usuario

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Manual de usuario

Linksys

Linksys Velop MX4000 Series Instrucciones de instalación y mantenimiento

Linksys

Linksys EtherFast EF3116 Manual de usuario

Linksys

Linksys WET610N - Wireless-N EN Bridge Manual de usuario

Linksys

Linksys MAX-STREAM MR5500 Series Manual de usuario

Linksys

Linksys Velop MX4000 Series Manual de usuario

Linksys

Linksys MR8300 Manual de usuario

Linksys

Linksys WET54GS5 - Wireless-G EN Bridge Instrucciones de funcionamiento originales

Linksys

Linksys SVR3000 - One Services Router Manual de usuario

Linksys

Linksys WAG120N Manual de usuario

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Manual de usuario

Linksys

Linksys EA9300 Manual de usuario

Linksys

Linksys VELOP Manual de usuario

Linksys

Linksys SFE1000P Manual de instrucciones

Linksys

Linksys MAX-STREAM EA8300 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad