Linksys EG0801SK - EtherFast Network Starter Manual de usuario

Instant Gigabit Series

EtherFast®10/100/1000

8+1 Workgroup

GigaSwitch Starter Kit

User Guide

Use this guide to install :

0801

Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of

Microsoft Corporation. All other trademarks and brand names are the property of their

respective proprietors.

LIMITED WARRANTY

Linksys guarantees that every EtherFast®10/100/1000 8+1 Workgroup GigaSwitch

Starter Kit is free from physical defects in material and workmanship under normal use

for ONE year from the date of purchase. If the product proves defective during this

warranty period, call Linksys Customer Support in order to obtain a Return

Authorization number. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BAR-

CODE FROM THE PRODUCT’S PACKAGING ON HAND WHEN CALLING. RETURN

REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When

returning a product, mark the Return Authorization Number clearly on the outside of the

package and include your original proof of purchase. All customers located outside of

the United States of America and Canada shall be held responsible for shipping and

handling charges.

IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PROD-

UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-

AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT-

WARE, OR ITS DOCUMENTATION. LINKSYS OFFERS NO REFUNDS FOR ITS PROD-

UCTS. TAMPERING WITH OR DISASSEMBLING THE PRODUCT VOIDS THE LINKSYS

WARRANTY. Linksys makes no warranty or representation, expressed, implied, or

statutory, with respect to its products or the contents or use of this documentation and

all accompanying software, and specifically disclaims its quality, performance, mer-

chantability, or fitness for any particular purpose. Linksys reserves the right to revise or

update its products, software, or documentation without obligation to notify any individ-

ual or entity. Please direct all inquiries to:

Linksys P.O. Box 18558, Irvine, CA 92623.

FCC STATEMENT

The EtherFast®10/100/1000 8+1 Workgroup GigaSwitch Starter Kit has been tested

and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used according to the

instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which is found

by turning the equipment off and on, the user is encouraged to try to correct the inter-

ference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment or device

• Connect the equipment to an outlet other than the receiver’s

• Consult a dealer or an experienced radio/TV technician for assistance

UG-EG0801SK-10208NC DG

Contents

Introduction 1

Your EtherFast®10/100/1000 8+1 Workgroup GigaSwitch 1

Features 1

Package Contents 2

System Requirements (for the PCI Adapter) 2

Getting to Know the EtherFast® 10/100/1000 8+1

Workgroup GigaSwitch 3

The 10/100/1000 Workgroup GigaSwitch’s Rear Panel 3

The 10/100/1000 Workgroup GigaSwitch’s Front Panel 4

Getting to Know the Instant Gigabit Network

Adapter 5

LEDs 5

The RJ-45 Port 5

Planning Your Network 6

Overview 6

Switches Versus Hubs 6

Where to Install the Instant Gigabit Network Adapter 8

Installing the EtherFast® 10/100/1000 8+1 Workgroup

GigaSwitch Starter Kit onto Your Network 10

Overview 10

Installing the Instant Gigabit Network Adapter 10

Installing the Workgroup GigaSwitch 12

Connecting Your HardwareTogether and Booting Up 12

Tips on SwitchingYour Network 13

Installing the Drivers for Windows 95 14

Overview 14

Installing the Drivers in Windows 95 Version B 15

Installing the Drivers for Windows 98 18

Overview 18

Installing the Network Adapter’s Driver 18

Installing the Drivers for Windows Millennium 22

Overview 22

Installing the Network Adapter’s Driver 22

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Instant Gigabit Series

Windows NT 4.0 Installation and Setup 26

Overview 26

Installing NT Networking and the Network Adapter Driver 27

Installing the Network Adapter Driver if Networking is Already Installed 33

Windows 2000 Installation and Setup 37

Overview 37

Installing the Network Adapter’s Driver 37

Advanced Properties 41

Configuring the Instant Gigabit Network Adapter 43

Configuring the Adapter for Windows 95, 98, and Millennium 43

Appendix 48

Sharing Your Files and Printers 48

Installing the Driver in Windows 95 Version A 50

Novell NetWare 3.x Client Setup forWindows 95,98, or Millennium 51

Starting Over in Windows 95, 98 or Millennium 52

Starting Over in Windows 2000 56

Manually Installing the Network Components in 59

Windows 95, 98, or Millennium

Installing and Configuring Wake-On-LAN 61

About Plug-and-Play PCI Technology 61

Linux, Open Source and Beta Operating Systems 63

Twisted Pair Cabling 63

Troubleshooting 64

Glossary 68

Specifications 76

Specifications for EG1032 76

Specifications for EG0801W 77

Environmental 78

Warranty Information 79

Contact Information 80

• One Instant Gigabit (32-Bit) Adapter

• One 10/100/1000 8+1 Workgroup Gigaswitch®

• One Category 5E Network Crossover Cable (10 ft.)

• One 3.5” Driver Disk

• One AC Power Adapter

• One Stacking/Wall Mounting Module

• One User Guide and Registration Card

• Pentium 90Mhz or Faster

• Minimum 16MB of RAM

• PCI Local Bus 2.1 or higher compliant

• Windows 95 (or higher) Operating System

Package Contents

Introduction

Your EtherFast® 10/100/1000 8+1 Workgroup Gigaswitch

Congratulations on purchasing your new Linksys EtherFast®10/100/1000

Workgroup GigaSwitch Starter Kit for your network's 10/100/1000 migration

needs. The EtherFast®10/100/1000 Workgroup GigaSwitch Starter Kit is the

easiest, most versatile way to boost your network's performance while migrat-

ing to the speed and power of Gigabit. Unlike hubs that ration your network

bandwidth and may slow down with high data traffic, your Linksys Switch

fuels each of your computers with full duplex transfer mode on top of dedi-

cated bandwidth to unleash your network speed.

In migrating your network to Fast Ethernet’s 1000Mbps speed, your new

Linksys 10/100/1000 GigaSwitch is ready to go to work for you immediately.

Apply this switching power to your network, and your data traffic efficiency

improves several times over. Connect your file server to the Gigabit port, and

speed up access time for all your users in just one move. And when you're

ready, switch your way to full duplex speeds of up to 2000Mbps--the speed is

yours!

Every Switch packs a complete suite of advanced data error detection fea-

tures for surefire communication every time. Auto partitioning and data colli-

sion control ensure that not a single bit is lost during even the heaviest

moments of network traffic. Built to last, your new EtherFast®10/100/1000

Workgroup GigaSwitch delivers optimal high-end video, gaming, multimedia,

database, and other speed-intensive applications at blazing speeds.

• 8 Port 10/100 Mbps Auto-Detect Half/Full Duplex Switch Ports and 1

Gbps Full Duplex Switch Port

• Internal Built-In 256 KB SRAM for Buffer Memory (Switch)

• Capable of Storing Up to 4096 MAC Addresses with Address Learning

• Non-BLocking Shared Memory Architecture

• Supports Aging Function and 802.3x Flow Control for Full Duplex and

Back-Pressure Function for Half-Duplex Operation (Switch)

• Easy to Use Plug-and-Play 10/100/1000 PCI Network Card

• Full Duplex Capability at Speeds Up To 2000Mbps (Adapter)

• Connects to 10Mbps, 100Mbps, and Gigabit Ethernet Networks (Adapter)

• Signal Regeneration Ensures Data Transfer Integrity

• Free Technical Support—24 Hours a Day, 7 Days a Week for North

America Only

• One-Year Limited Warranty

EtherFast®

10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

System Requirements (for the PCI Adapter)

Instant Gigabit Series

Features

The LED Indicators

Power Amber. The Power LED lights up when the Switch is pow-

ered on.

Link/Act Green. The Link/Act LED serves two purposes. If the LED

is continuously lit up, the Switch is successfully connected to

a device through the corresponding port (1through 8). If the

LED is flickering, the GigaSwitch is actively sending or

receiving data over that port.

FD/Col Green. The FD/Col LED also serves two purposes. If this

LED is lit up continuously, the connection made through the

corresponding port is running in Full Duplex mode. If the

LED flickers, the connection is experiencing collisions.

Infrequent collisions are normal.

If this LED flickers too often, there may be a problem with

your network.

10/100 Amber.The 10/100 LED lights up for any port when that port

is operating at 100Mbps. If the LED is off while the network

is operating, the port is operating at 10Mbps.

1000 Amber. The 1000 LED lights up when the Gigaswitch port is

operating at 1000Mbps. If the LED is flickering, data is

being transmitted through the port.

1000 Link/Act Green. The 1000 Link/Act LED lights up when the Gigabit

port is operating at 1000Mbps.

1000 FD/Col Green. The 1000 FD/Col LED lights up continuously when

the switch is operating at 2000Mbps and flickers when expe-

riencing data collisions.

The 10/100/1000 Workgroup GigaSwitch’s Front Panel

Getting to Know the EtherFast®

10/100/1000 Workgroup

GigaSwitch

The Workgroup GigaSwitch’s Ports

GigaSwitch The GigaSwitch port is used to connect to the PC

into which you have installed your Instant Gigabit

NetworkAdapter. Or, it can be used to expand your

network by connecting to a 1000Mbps hub or

switch, which is done by simply running the includ-

ed Category 5e cable from the GigaSwitch port to

the uplink port on the 1000Mbps hub or switch.

When connecting to your Instant Gigabit Network

Adapter, just plug one end of the included Category

5e cable into the RJ-45 port on the Adapter and the

other end into the GigaSwitch port on the

GigaSwitch.

Ports 1-8 These eight LAN (Local Area Network) ports con-

nect to network devices, such as PCs, print servers,

network attached storage, and remote hard drives at

10/100Mbps.

Power The Power port is where you will connect the

power adapter.

The 10/100/1000 Workgroup GigaSwitch’s Rear Panel

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Instant Gigabit Series

Planning Your Network

Building a Gigabit network involves more topology rules in addition to the

10BaseT/100Base-TX network rules. These rules specify distance limitations

and cabling specifications. Data loss, collisions, and other network problems

causing down time are likely to occur if the rules below are not followed.

• Use UTP Category 5 (or better) Ethernet cabling with four pairs of wires

and RJ-45 tips for all Fast Ethernet connections. Gigabit connections

require Category 5e (or better).

•Use the chart below to position your switches, hubs and workstations.

*Hub refers to any type of 100Mbps hub, including regular hubs and stackable hubs. A

10Mbps hub connected to another 10Mbps hub can span up to 100 meters (328 feet).

• No more than two hubs should be uplinked in a row in a Fast Ethernet net-

work. A set of stacked hubs, which must be stacked with a stacking cable,

counts as one hub or node on the network.

•In Fast Ethernet networks, your 10/100 Switch acts as a repeater, regener-

ating data signals before passing them on to the next device. Passive hubs

do not function as repeaters.

Your Workgroup GigaSwitch boosts your network performance several times

over, conserving your time, money and resources. The scalability of your

Switch, its full duplex data transfer and dedicated bandwidth all contribute to

maximizing efficiency in your Fast Ethernet network.

Your Switch’s 10/100 feature gives you a key advantage over other forms of

networking by upgrading speed-critical network segments to 100Mbps while

allowing existing 10BaseT networks to operate with the Switch. Allowing

10BaseT and 100BaseTX hardware speeds to run alongside each other elimi-

From

Switch

Hub*

Switch or Hub

Switch or Hub*

Hub*

Workstation 1

Maximum Distance

100 meters (328 feet) 1

5 meters (16.4 feet) 1

100 meters (328 feet) 1

Overview

Switches Versus Hubs

Getting to Know the Instant

Gigabit Network Adapter

LEDs

Link/Act The Link LED will illuminate when the card has been successfully

connected to a network and flicker when there is network activity.

1000 The 1000 LED will illuminate when the card is operating at

1000Mbps. If the 1000 LED is not illuminated and the PC is pow-

ered on, the card will have automatically determined that your net-

work is operating at a slower speed and compensate accordingly.

The RJ-45 Port

The RJ-45 Port is where you will connect your network cabling.

The LEDs

The RJ-45 Port

Instant Gigabit Series EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Getting to Know the Instant

Gigabit Network Adapter

If you are setting up a network for the first time, or if you already have a

10/100 BaseT network without Gigabit capability, you may be wondering

which PC should have the Instant Gigabit Network Adapter installed in it for

best performance. In either of the above situations, we recommend that you

set up your network in the configuration shown below (Configuration A).

The Instant Gigabit Network Adapter is installed in your File Server (or your

Internet gateway) and connected to your Workgroup GigaSwitch using the

provided cable, which is in turn connected to the rest of your network. If you

do not have a File Server or Internet gateway, the Adapter should be installed

in the PC that is most often accessed on the network.

Where to Install the Instant Gigabit Network Adapter

Configuration A

Note: Use the crossover

cable provided to connect

directly to your Instant

Gigabit Network Adapter or

to an Uplink port on your

Gigabit hub or switch.

nates the need to purchase new hardware, rewire and reconfigure an entire

site all at once. This scalability factor ensures that Fast Ethernet will not fall

obsolete to upgrades in speed standards and maintains use of all your old

equipment until you decide to buy speedier replacements.

Scalability allows you to budget for your networking needs over time.

Now networks can run fast and slow segments at the same time for different

users and departments.

Switches also feature full-duplex data transfer, meaning that all computers

on the switch can “talk” to the switch at the same time. Plus, switches can

send and receive data simultaneously to all connections, whereas a hub can-

not. A hub simply works with one computer at a time and only sends or

receives data, since it cannot handle two way communication.

In addition to full-duplex transfer, your Switch surges your network with

dedicated bandwidth to each node. For instance, if you connect five com-

puters to your EtherFast 10/100/1000 8+1 Workgroup GigaSwitch, then each

computer will get a dedicated bandwidth of 100Mbps at full duplex transfer.

If you run 5 computers from a 100Mbps hub, then each computer will only

share a part of the 100Mbps bandwidth.

A network without a switch is called a shared network because every node

on the network competes for a fraction of the total bandwidth. In a shared

network, data packets are randomly broadcasted to all stations until they

discover their intended destination. Consequently, considerable time and

bandwidth is wasted on data packets swimming along network lines before

they find their correct address. A switch, on the other hand, looks at the

address for each data packet and delivers it directly to the correct destination.

Gigabit Ethernet is ideal for deployment as a backbone interconnect between

10/100BASE-T switches, and as a connection to high-performance servers.

With the addition of Gigabit Ethernet, Ethernet delivers scalable solution

(10/100/1000 Mbps) for the LAN from the desktop to the workgroup, and the

backbone.

Instant Gigabit Series EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Installing the EtherFast®

10/100/1000 8+1 Workgroup

GigaSwitch Starter Kit onto Your

Network

Installing your Starter Kit will involve installing both the Adapter and the

GigaSwitch. If you are integrating these items into an existing nework, some

additional steps may be necessary involving settings for your existing equip-

ment. Consult your Network Administrator for more information about how

the Starter Kit will interface with your existing network components.

Each Instant Gigabit Network Adapter is equipped with an RJ-45 port that

automatically adjusts to either 10Mbps, 100Mbps, or 1000Mbps speeds, allow-

ing your PC to attach to either Gigabit Ethernet, Fast Ethernet, or regular

Ethernet network segments without additional hardware or software.

The card should only be used with twisted-pair cabling, such as 10BaseT,

100BaseTX, or 1000BaseT cabling. For best results, we recommend using

Category 5e or better unshielded twisted-pair cabling although category 3 can

be used for 10BaseT segments. Only Category 5e or better cable will work

for Gigabit transfer. If you use the cable included in your Starter Kit, both

your Adapter and Gigaswitch will operate at the maximum speed of your net-

work. In any case, the cable that runs from your PC’s Instant Gigabit Network

Adapter card to your network should not exceed 100 meters (328 feet).

Installing the Network Card & Cabling

1. Power off your PC and any peripheral equipment attached to it. Unplug

your PC’s power cord. For suggestions on choosing the PC in which to

install the Adapter, see the section called PlanningYour Network.

2. Remove your computer's outside cover.

Overview

Installing The Instant Gigabit Network Adapter

Instant Gigabit Series

Configuration B

If you are already operating in a Gigabit environment, we suggest a configu-

ration like the one shown below (Configuration B). Your Instant Gigabit

Network Adapter would be installed in your file server, which would be

attached to your Gigabit hub or switch, maximizing your file server’s band-

width. The Workgroup GigaSwitch would be connected to one of the other

Gigabit ports on your Gigabit switch or hub, acting like a bridge between the

1000Mbps section of your network and the 10/100 portion of your network.

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

109

Connecting Computers To Your Switch

Your Switch’s rear panel has eight standard RJ-45 ports, plus a Gigabit port.

Each 10/100 port automatically detects the speed and duplex of the attached

cabling to a network card, switch, hub, etc. The ports operate in either full or

half duplex, which lets you run at speeds of 200Mbps, 100Mbps, 20Mbps or

10Mbps. The Gigabit port operates at 2000 Mbps.

Each 10/100 port on your Switch can connect to workstations, file servers,

hubs, repeaters, bridges, routers or other switches. Connections to the switch

require UTP Category 5 network cabling with RJ-45 tips, not to exceed 100

meters (328 feet) in length.

To connect a computer directly to the switch, plug one end of a standard net-

work cable into the switch, then plug the other end of the cable into the com-

puter's network adapter.

To connect the Instant Gigabit Network Adapter to the Workgroup

GigaSwitch, plug one end of the cable provided in the package into the RJ-45

port on the Instant Gigabit Network Adapter and the other into the

GigaSwitch port on the back of the Workgroup GigaSwitch.

Uplinking to Other Switches and Hubs

Your GigaSwitch can be uplinked to other switches, hubs, and similar net-

work devices, provided that those devices have an uplink port. Attach the

Category 5e cabling to the uplink port of the network device that you are

uplinking to, and plug the other end of the cable into one of the open ports

(not the Gigabit port) on your GigaSwitch.

Plug in the GigaSwitch's AC power adapter. The Power LED will light up. As

devices make connections to the Switch’s ports, each port's corresponding

Link/Act LED will light up. The remaining LEDs will also light up accord-

ing to how your connection is made, e.g. full or half duplex, 10Mbps or

100Mbps.

If the Switch experiences excessive data collisions, verify that your network

cabling is securely crimped and installed properly.

Instant Gigabit Series

Connecting Your Hardware Together and Booting Up

Installing The Workgroup Gigaswitch

3. Open your computer and locate the PCI slot(s) on your motherboard. PCI

slots are easily identified by their beige or white color, and by the fact that

network cards fit snugly into them. Remove the metal slot cover on the

back of the PC, then insert the Instant Gigabit Network Adapter into any

available PCI card slot.

4. If you are interested inWake-On-LAN, refer to the Appendix for instruc-

tions on Wake-on-Lan installation. Wake-On-LAN can be installed at any

time, so there is no need to do it now.

5. Once your Instant Gigabit Network Adapter is firmly in place, secure

its fastening tab to your PC's chassis with a mounting screw.

6. Replace your PC's cover.

7. Connect one end of the twisted-pair cable to your PC at the Instant

Gigabit Network Adapter’s RJ-45 port.

8. Plug the other end of the cable into your network’s Gigabit hub or switch

port.

9. Reconnect your PC’s power, then power on your computer. Your comput-

er will automatically recognize the card and assign it a unique IRQ ("inter-

rupt") and I/O address.

The card installation is complete. Next, you must configure your PC’s

operating system to work with the Instant Gigabit Network Adapter.

Turn to the appropriate section for your PC’s operating system for driver

installation instructions.

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

Installing the Drivers for

Windows 95

After installing the Instant Gigabit Network

Adapter in your computer, follow these

instructions for installing the network driv-

er. The installation procedure for the net-

work driver will vary slightly depending on

the version of Windows 95 you are using

and your current system configuration. For

troubleshooting tips during setup, refer to

the Troubleshooting section.

There are different versions of Windows 95:

• VersionA

• Version B (also known as OSR2)

The installation procedure for the network driver will vary slightly depending

on which version of Windows 95 you are using. To begin the driver installation,

and to determine which version of Windows 95 you are using:

1. Start up your PC.

2. Windows 95 will automatically detect the Network Adapter in your com-

puter. If the Update Device DriverWizard window appears (see next page),

you are using Windows 95 version B. If a window other than this appears,

you are using Windows 95 version A. For Windows 95 version A driver

installation, refer to the Appendix.

NNoottee::During the installa-

tion, Windows 95 may ask

you for a ccoommppuutteerroorrwwoorrkk--

ggrroouuppnnaammee. If so, turn to

step eight in NNeettwwoorrkk

CCoommppoonneennttCCoonnffiigguurraattiioonn.

Once you have established

your computer and work-

group names, go back to

where you left off and con-

tinue with the installation.

Overview

Tips on Switching Your Network

Here are some of the ways your new EtherFast® 10/100/1000 8+1 Workgroup

GigaSwitch can help you optimize your network speed.

• Speed up Nodes FromYour 10BaseT Network

In a 10BaseT network, connect your hubs, file servers, and key users, such as

network administrators, directly to your Switch to channel dedicated band-

width in full-duplex mode (if operating in full-duplex) to each station. The

Switch will have dedicated communication with all its connections simultane-

ously, whereas a hub will only communicate in half-duplex transfer mode and

broadcasts information to all ports.

• Conserving Bandwidth with 10Mbps & 100Mbps Segments

10BaseT and 100BaseTX hardware are not readily compatible, but your

10/100 Switch can designate network segments of different speeds. This

allows you to run one 10Mbps segment to serve users without a need for con-

siderable speed, and a faster 100Mbps segment devoted to users who depend

heavily on graphics, multimedia, database, or other speed-intensive applica-

tions. With switched segmentation, your 100Mbps users will not be slowed

down by the users on the 10Mbps segment.

• Run 10Mbps Peripherals in Your Fast Ethernet Network

Most of the network peripherals in place today run at 10Mbps, since 10BaseT

has been the standard network speed to date. These peripherals, designed to

operate at 10Mbps, cannot readily communicate with 100BaseTX equipment.

A 10Mbps interface is also required for cable and DSL connections, which

are quickly becoming very popular ways to access the Internet. Your 10/100

Switch provides your 10BaseT equipment and cable and DSL lines with a

10Mbps interface while still running your Fast Ethernet devices at 100Mbps.

• Strengthen Data Transfers Through Signal Regeneration

Your Switch functions as a repeater, which regenerates data signals as they

pass through it. This feature acts as a safeguard to deter data loss and ensure

that transmissions arrive at their destination intact. Switches positioned

between hubs can preserve your data’s integrity and eliminate your need to

buy and use repeaters in your Fast Ethernet network.

Tips on Switching Your Network

Instant Gigabit Series EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Starter Kit

1413

Otros manuales para EG0801SK - EtherFast Network Starter

Tabla de contenidos

Otros manuales de Enrutador de red de Linksys

Linksys

Linksys RT31P2-VU Instrucciones de funcionamiento originales

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Manual de usuario

Linksys

Linksys Instant PowerLine PLEBR10 Manual de usuario

Linksys

Linksys WRTSL54GS Manual de usuario

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router Manual de usuario

Linksys

Linksys MAX-STREAM EA9250 Manual de usuario

Linksys

Linksys BEFW11S4 ver.3 Guía

Linksys

Linksys E8454 Manual de usuario

Linksys

Linksys WRVS4400N - Small Business Wireless-N Gigabit Security... Manual de usuario

Linksys

Linksys Instant PowerLine PLEBR10 Manual de usuario

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Instrucciones de funcionamiento originales

Linksys

Linksys SRW208P - Cisco Small Business Managed... Manual de operación

Linksys

Linksys RTP300 - Broadband Router With 2 Phone Ports Manual de usuario

Linksys

Linksys RVS4000 Instrucciones de uso

Linksys

Linksys SLM2024 Manual de usuario

Linksys

Linksys XAC Series Manual de usuario

Linksys

Linksys PC22604 - ProConnect II 2604 Switch Manual de usuario

Linksys

Linksys WAG54G - Wireless-G ADSL Gateway Wireless... Manual de usuario

Linksys

Linksys RV042 Instrucciones de funcionamiento originales

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Manual de usuario

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router Manual de usuario

Linksys

Linksys MAX-STREAM EA7400 Manual de usuario

Linksys

Linksys R75 Manual de usuario

Linksys

Linksys E8400 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad