Linksys RT31P2-VU Instrucciones de funcionamiento originales

A Division of Cisco Systems, Inc.

Model No.

Quick Installation

Model No.

RT31P2-VU

with 2 Phone Ports

Broadband Router

Package Contents

• Broadband Router with 2 Phone Ports

• Power Adapter

• Setup Wizard CD-ROM with Norton Internet Security

• Installation and Troubleshooting Guide

•NetworkCable

• Telephone Jack Adapter

• Quick Installation

DIf you have a second phone

line, repeat step C to connect

a telephone or fax machine to

the Router’s PHONE 2 port.

EConnect your cable or DSL

modem’s Ethernet cable to

the Router’s Internet port. (If

your modem only provides a

USB output, then you will need

to upgrade your modem.)

FPower on the cable or DSL

modem.

GConnect the included power

adapter to the Router’s Power

port, and then plug the power

adapter into an electrical

outlet.

The Power LED on the front

panel will light up as soon as

the power adapter is

connected properly.

HPower on the PC you wish to

use to configure the Router.

In Step 2, you will need the setup

instructions provided by your Internet

Service Provider (ISP). If you do not

have this information, then contact

your ISP before proceeding.

The instructions from your ISP tell you

how to set up your PC for Internet

access. Because you are now using

the Router to share Internet access

among several computers, you will

use the setup information to

configure the Router instead of

your PC.

AOpen your PC’s web browser.

Enter http://192.168.15.1 (the

Router’s default local IP

address) in the web browser’s

Address field. Then press the

Enter key.

BA screen will appear and ask

you for a User Name and

Password. Enter admin (the

default) in the User Name and

Password fields. (Later you

should set a new password

using the Administration tab’s

Management screen. This will

help secure access to the

Web-based Utility.)

Then click the OK button.

AMake sure that all of your

hardware is powered off,

including the Router, PCs, and

cable or DSL modem.

BConnect one end of an

Ethernet network cable to one

of the numbered ports on the

back of the Router. Connect

the other end to an Ethernet

port on a network device, e.g.,

a PC, print server, or switch.

Repeat this step to connect

more PCs or other network

devices to the Router.

CIf necessary, disconnect the

telephone cable from the

telephone wall jack and

connect that end to the

telephone jack adapter. Then

connect the adapter to the

Router’s PHONE 1 port.

NOTE: Make sure your PC’s

Ethernet adapter is set to obtain

an IP address automatically. For

more information, refer to

Windows Help.

There are two ways to configure the Router. Choose one of the following:

• Run the Setup CD-ROM - It is strongly recommended that you use the

Setup CD-ROM. Insert the Setup CD-ROM into the CD-ROM drive, and

follow the on-screen instructions.

•Use this Quick Installation guide - If you wish, you can use the Router’s

Web-based Utility. Proceed to Step 1 of this Quick Installation.

1Connect the Router

Configure the Router

NOTE: Makesureyourtelephone

is set to its tone setting (not

pulse).

VoIP

cIn the DNS 1-3 fields, enter the

DNS address(es) provided by

your ISP. You need to enter at

least one DNS address.

dClick the Save Settings button.

3 PPPoE

aIf your ISP says that you are

connecting through PPPoE or if

you normally enter a user

name and password to access

the Internet, then select PPPoE

as the Internet Connection

Type.

bEnter the User Name and

Password provided by your ISP.

(Also enter the Service Name, if

required.)

cSelect Keep Alive if you always

want to be connected to your

ISP, or select Connect on

Demand if you are charged

for the time that you are

connected to your ISP.

dClick the Save Settings button.

eClick the Status tab and then

the Router tab. Click the

Connect button to start the

connection.

CThe Router’s Web-based Utility

will appear with the Basic Setup

screen showing.

DFor the Internet Connection

Type setting, six Internet

connection types are offered

through the drop-down menu.

Depending on which

connection type you select,

the features available on the

Basic Setup screen will differ.

Proceed to the instructions for

the connection type you are

using.

1 Obtain an IP Automatically

(DHCP)

aIf your ISP says that you are

connecting through DHCP or a

dynamic IP address from your

ISP, then select Obtain an IP

automatically as the Internet

Connection Type.

bClick the Save Settings button.

2 Static IP

aIf your ISP says that you are

connecting through a static or

fixed IP address from your ISP,

then select Static IP as the

Internet Connection Type.

bEnter the IP Address, Subnet

Mask, and Gateway Address

provided by your ISP.

ITo test the Router’s settings,

open your web browser from

any computer. In the browser’s

Address field, enter

www.linksys.com and press the

Enter key.

Congratulations! The installation of

the Router is complete.

4PPTP

PPTP is a service used in Europe and

Israel only. If you are using a PPTP

connection, check with your ISP for

the necessary setup information.

5 RAS

RAS is a service used in Singapore

only. If you are using a RAS

connection, check with your ISP for

the necessary setup information.

6 Heart Beat Signal

Heart Beat Signal is a service used in

Australia only. If you are using a Heart

Beat Signal connection, check with

your ISP for the necessary setup

information.

EIf requested by your ISP (usually

cable ISPs), complete the Host

Name and Domain Name

fields. Otherwise, leave them

blank.

FIf you haven’t already done so,

click the Save Settings button.

Then close the web browser.

GPower your cable or DSL

modem off and back on

again.

HRestart or power on your PCs so

they can obtain the Router’s

new settings.

RT31P2-VU-QI-41215A JL

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

Model No.

PPPoE

PPTP

Heart Beat Signal

Obtain an IP

Static IP

Automatically

RAS

For additional information or troubleshooting

help, refer to the Installation and

Troubleshooting Guide on the CD-ROM. You

can also call or e-mail for further support.

Website

http://www.linksys.com

Support

[email protected]

Otros manuales de Enrutador de red de Linksys

Linksys

Linksys BEFSR81 - EtherFast Cable/DSL Router Manual de usuario

Linksys

Linksys RVS4000 Manual de usuario

Linksys

Linksys WET11 - Instant Wireless EN Bridge Network... Manual de usuario

Linksys

Linksys WET11 - Instant Wireless EN Bridge Network... Manual de usuario

Linksys

Linksys MAX-STREAM EA7400 Manual de usuario

Linksys

Linksys Smart Switch LGS3XX Manual de usuario

Linksys

Linksys WAG54G - Wireless-G ADSL Gateway Wireless... Manual de usuario

Linksys

Linksys SVR3000 - One Services Router Manual de usuario

Linksys

Linksys BEFN2PS4 - EtherFast Cable/DSL And Voice... Instrucciones de funcionamiento originales

Linksys

Linksys SGE2010P Manual de operación

Linksys

Linksys WRT54GV2 Manual de usuario

Linksys

Linksys BEFN2PS4 - EtherFast Cable/DSL And Voice... Manual de usuario

Linksys

Linksys WRT54GL - Wireless-G Broadband Router... Manual de usuario

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router Manual de usuario

Linksys

Linksys Cable/DSL Firewall Router Manual de usuario

Linksys

Linksys BEFSR81 - EtherFast Cable/DSL Router Instrucciones de funcionamiento originales

Linksys

Linksys MR2000 Series Manual de usuario

Linksys

Linksys PAP2 Instrucciones de uso

Linksys

Linksys EA6500 Manual de usuario

Linksys

Linksys RVS4000 Manual de usuario

Linksys

Linksys EtherFast EF4116 Manual de usuario

Linksys

Linksys MAX-STREAM EA 7300 Manual de usuario

Linksys

Linksys WET54GS5 - Wireless-G EN Bridge Manual de operación

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router Manual de operación

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad