Linksys PLW400 Manual de usuario

User

Guide

Linksys PLW400 Powerline AV Wireless Network Extender

Contents

Linksys PLW400

Overview . . . . . . . . . . . . . . . 3

Features . . . . . . . . . . . . . . . . . . . . . 3

How Powerline networking works . . . . . . . . . . . 4

Example installation . . . . . . . . . . . . . . . . . . . . . . . 4

Installing the PLW400 . . . . . . . . . . 5

Installation overview . . . . . . . . . . . . . . . . 5

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

How to connect your PLW400 . . . . . . . . . . . . . 5

Setting up advanced security . . . . . . . . . . . . . 6

Using the Utility . . . . . . . . . . . . 6

Troubleshooting . . . . . . . . . . . . 8

Specications . . . . . . . . . . . . 10

Contents

Overview

Linksys PLW400

Thank you for choosing this Linksys PLW400 wireless Powerline network

adapter. This adapter provides easy setup and let you connect wireless network

devices to your Powerline network.

This setup guide assumes you already have a working Powerline network.

You can find more help from our award-winning, 24/7 customer support at

Linksys.com/support.

Features

Wi-Fi Protected Setup™ button—Press this button to connect with

other wireless network devices that have a Wi-Fi Protected Setup

button.

HomePlug Simple Connect button—Configures advanced security

(the network password) for your Powerline network.

Reset button (recessed)—To restore the factory default settings

(including the advanced security settings and the network

password), use a pointed object to press and hold the Reset button

for at least ten seconds.

Powerline LED—The Powerline LED turns on when the adapter is

connected to the Powerline network. The LED flashes to indicate

network activity.

Ethernet LED—The Ethernet LED turns on when a wired network

device is turned on and connected to the adapter’s Ethernet

(network) port. The LED flashes to indicate network activity.

Wireless LED—The Wireless LED turns on when a wireless network

device is connected to your PLW400.

Wi-Fi Protected Setup LED—This LED flashes while a wireless

network device is connecting with your PLW400 using Wi-Fi

Protected Setup.

Power LED—The power LED turns on when the adapter is

connected to a powered electrical outlet.

Ethernet port—Use a network (Ethernet) cable to connect this port

to a wired network device.

Overview

Linksys PLW400

How Powerline networking works

Electrical wiring runs through your home or office, carrying power to electrical

outlets in every room. The typical wired Ethernet network uses Ethernet

network cables to connect your wired network devices. A Powerline network

uses your existing household wiring as the wiring for your Powerline network.

To create your Powerline network, use two or more Powerline adapters. Each

device on your Powerline network requires a connection (either wired or

wireless) to a Powerline adapter.

Your PLW400 contains one Ethernet port and a wireless access point. You can

connect one wired device and several wireless devices to it.

Example installation

This diagram shows a basic Powerline network in a house. The router upstairs

is connected to a Powerline adapter, which is plugged into an electrical outlet.

Downstairs, the gaming console and a computer are connected to the PLW400,

which is plugged into an electrical outlet.

Using the household wiring of the home, the router expands the local network

to include the gaming console and desktop computer in the living room.

Internet access, files, and printers can be shared between the computers and

other networked devices. For online gaming, you can play downstairs in the

comfort of your living room, while using the high-speed Internet connection

of the router and modem upstairs.

Modem

Router

Computer

Gaming

Console

PLE400

PLW400

Installing the PLW400

Linksys PLW400

Installation overview

To set up your Powerline network, you should:

•Make sure you already have Internet access and a working home

Powerline network.

•Make sure that the wireless devices that you want to connect to the

PLW400 have a working wireless feature. An easy way to test this is to

first try to connect the wireless network device to your home’s wireless

router while near the router.

Tips

•If possible, connect Powerline adapters directly to a wall power outlet,

and not to an extension cord, power strip, or surge protector.

•If a Powerline adapter must be installed onto a power strip, make sure

that no other electronic devices are connected to the same power strip.

•If possible, position the PLW400 near the wireless devices that you want

to connect.

•Avoid obstructions (such as metal file cabinets, mirrors, and thick walls)

between the PLW400 and any wireless device you want to connect.

How to connect your PLW400

After you have a basic Powerline network set up, you can add this PLW400

anywhere in your home.

TIP

You can also set up and configure all of your Linksys Powerline

devices using the configuration utility. For more information, see

“Using the Utility” on page 6.

To connect your PLW400:

Make sure that the power switch on the right side is set to I (on).

If your home network already has security set up (recommended):

Connect the PLW400 to a power outlet near your main wireless router.

On the PLW400, press and hold the Wi-Fi Protected Setup button

at least one second, until the the Wi-Fi Protected Setup LED flashes.

Installing the PLW400

Using the Utility

Linksys PLW400

Within two minutes, press the Wi-Fi Protected Setup button on

your wireless router. The PLW400 retrieves the security settings from

the router and connects to your wireless network.

Move your PLW400 to a power outlet near the wireless network device(s)

you want to connect. Typically, this area is not covered well by your

home’s wireless network router.

The Powerline LED flashes, then stays on when the connection to the

rest of the Powerline network is finished. Your home’s wireless network is

now available in the area surrounding the PLW400.

Connect the wireless network device to the wireless network in the

usual manner. For instructions, see your wireless network device’s user

documentation. The PLW400’s Wireless LED flashes, then stays on

when a wireless network device successfully connects.

Setting up advanced security

NOTE

The devices connected to the Powerline adapters will temporarily

lose Internet connection during the security setup.

To configure your network adapter with advanced security:

On one of the existing Powerline adapters that already have advanced

security set up, press and hold the HomePlug Simple Connect

button for at least one second, until the Powerline LED begins

flashing slowly.

On your PLW400, press and hold the HomePlug Simple Connect

button for at least one second, until the Powerline LED begins

flashing slowly. When the LED stops flashing, the network key has been

shared with the PLW400.

NOTE

The devices connected to the adapters will regain Internet access

within five minutes.

Using the Utility

If you’re having difficulty connecting the adapters using the previous method,

or if you’d like to set more advanced options, you can use the configuration

utility.

To install the configuration utility:

Connect a computer’s Ethernet port to the PLW400’s Ethernet port using

the provided cable.

Insert the setup CD into the computer’s CD or DVD drive, then follow the

on-screen instructions.

To use the configuration utility:

After the utility is installed:

On Windows systems:

Click Start, All Programs, Cisco Systems, then Cisco Powerline AV

Utility. The utility opens.

On Mac OS X systems:

Open the Applications folder, then double-click the Cisco Powerline

AV Utility icon. The utility opens.

Using the Utility

Linksys PLW400

NOTE

If you try to change the settings of a Powerline device from a

computer that is not connected directly to that device with a cable,

you are prompted for a password. The device password is printed

on the back of the device.

Click the Network Status tab to view details of the Powerline adapters

that are connected to your network.

•If a connected adapter is not listed here, click Refresh.

•To change information for any adapter that’s listed, select the adapter,

then click Edit.

Click the Security tab to manually change the network key for each

device. If you need to revert to the default key, click Restore Default Key.

Click the Quality of Service tab to specify how the network prioritizes

network bandwidth.

Click the Administrator tab to restart an adapter, restore factory defaults,

or upgrade the adapter’s firmware.

Troubleshooting

Linksys PLW400

Click the Wireless Settings tab to change the wireless network name

(SSID), wireless security type, or passkey.

Settings are applied to the adapter(s) immediately. Close the window to

exit the utility.

Troubleshooting

Your wireless network device is not recognized by your network.

Try the following:

•Make sure that the wireless device is turned on and that its wireless

networking is turned on.

•If possible, position the PLW400 near the wireless device that you want

to connect.

•Avoid obstructions (such as metal file cabinets, mirrors, and thick walls)

between the PLW400 and any wireless device you want to connect.

If you have set up advanced security for the Powerline network, check the

following:

•Make sure all adapters on the Powerline network have been configured

with the same network password. The network password must be

identical in order for them to communicate with each other. See “Setting

up advanced security” on page 6 or “Using the Utility” on page 6.

The Ethernet LED does not turn on after you connected a wired Ethernet

device to the Powerline adapter.

Follow these instructions:

Make sure that the Ethernet network cable is securely connected to the

adapter.

Make sure that the Ethernet network cable is securely connected to the

network device you are connecting.

Or:

Disconnect the adapter from the power outlet.

Disconnect the Ethernet network cable from the adapter.

Wait five seconds.

Re-connect the Ethernet network cable to the adapter.

Re-connect the adapter to the power outlet.

Troubleshooting

Linksys PLW400

If this solution does not work, make sure that the electrical outlet is

working properly. Plug a different device into the outlet, and try to turn

it on.

You cannot connect to other computers on your local network or to the

Internet.

If you did not set up advanced security for the Powerline network, follow these

instructions:

Locate the Powerline adapter connected to the computer that cannot

connect.

On the left side of the adapter, use a pointed object to press and hold

the Reset button for at least ten seconds. This resets the adapter to its

factory default settings.

If you have set up advanced security for the Powerline network, check the

following:

•Make sure all adapters on the Powerline network have been configured

with the same network password. The network password must be

identical in order for them to communicate with each other. See “Setting

up advanced security” on page 6 or “Using the Utility” on page 6.

•If you are adding a new adapter to a pre-existing Powerline network with

a unique network password, follow the instructions in “Using the Utility”

on page 6.

The LEDs are flashing and I don’t know what it means.

Refer to the following table of LED behavior to help diagnose the problem:

Powerline LED

Off Not connected to Powerline network

Flashing fast Send/Receive data

Flashing slow Pairing

Solid Connected to Powerline network

Ethernet LED

Off Not connected to Ethernet network

Flashing Send/Receive data

Solid Connected to Ethernet network

Wireless LED

Off Wireless not connected

Solid Wireless enabled

Flashing Send/Receive data

Wi-Fi Protected

Setup

Flashing slow Connection in progress (up to two

minutes)

Flashing fast Connection error.

Solid Connection successful

Power LED

Off Device power off

Solid Device power on and ready

Flashing fast

momentarily Factory default

Flashing fast

indefinitely Pairing error/system error

WEB

If your questions are not addressed here, go to the Linksys Support

website at Linksys.com/support.

Specifications

Linksys PLW400

Specifications

Model PLW400

Standards HomePlug AV, IEEE 801.11b/g/n, 802.3, 802.3u

Ports Fast Ethernet (10/100)

Buttons Wi-Fi Protected Setup, Easy Connect, Reset

LEDs Powerline, Ethernet, Wireless, Wi-Fi Protected

Setup, Power

Security Features 128-Bit AES Link Encryption, WPA2, WPA, WEP

Modulation schemes 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO

Network client support Up to 8 Powerline client devices, up to 32

wireless client devices

Utility OS requirements Windows 7/Vista/XP, Mac OS X v10.5 or higher

Default SSID “CiscoXXXXX” where XXXXX is the last 5 digits of

the adapter’s serial number

Environmental

Dimensions 113 × 73 × 33 mm (4.45 × 2.87 × 1.3 inches)

Weight 158 g (5.6 oz.)

Power 100-240V AC, 50-60 Hz

Certications FCC, IC, CE, WiFi, HomePlug AV

Operating Temp. 0 to 40ºC (32ºF to 104ºF)

Storage Temp. -20 to 70ºC (-4ºF to 158ºF)

Operating Humidity 10 to 85% Non-condensing

Storage Humidity 5 to 90% Non-condensing

Tabla de contenidos

Otros manuales de Extensor de Linksys

Linksys

Linksys WSB24 Instrucciones de funcionamiento originales

Linksys

Linksys N300 Manual de usuario

Linksys

Linksys RE6500 Manual de usuario

Linksys

Linksys N300 Manual de usuario

Linksys

Linksys RE9000 Manual de usuario

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Manual de usuario

Linksys

Linksys DMA2100 - Media Center Extender Manual de usuario

Linksys

Linksys WSB24 Instrucciones de funcionamiento originales

Linksys

Linksys AC3000 Manual de usuario

Linksys

Linksys RE6250 Manual de usuario

Linksys

Linksys RE6350 Manual de usuario

Linksys

Linksys RE7000 Manual de usuario

Linksys

Linksys FlipShare TV CTV1W Manual de usuario

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Manual de operación

Linksys

Linksys RE4100W Manual de usuario

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Instrucciones de funcionamiento originales

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Instrucciones de funcionamiento originales

Linksys

Linksys WSB24 Manual de usuario

Linksys

Linksys WMCE54AG - Wireless A/G Media Center... Instrucciones de funcionamiento originales

Linksys

Linksys RE6500 Manual de usuario

Linksys

Linksys RE6300 Manual de usuario

Linksys

Linksys RE3000W Manual de usuario

Linksys

Linksys RE6350 Instrucciones de funcionamiento y seguridad

Linksys

Linksys RE3000W Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario