Linksys RE7310 Manual de usuario

User Guide

AX1800

MAX-STREAM®

WiFi Range Extender

Model RE7310

Contents

Product Overview ................................................................................................... 3

Front view...................................................................................................................................................3

Side view..................................................................................................................................................... 4

How to Install the Range Extender................................................................... 5

Setting up as a wireless range extender.........................................................................................5

Accessing Your Range Extender Settings ................................................. 11

Using Range Extender Settings ..................................................................... 13

WPS ........................................................................................................................................................... 14

Site Survey ............................................................................................................................................. 16

QoS (Quality of Service)..................................................................................................................... 17

Cross-Band ............................................................................................................................................. 17

Access Control...................................................................................................................................... 17

Troubleshooting ................................................................................................... 18

You cannot get your range extender connected....................................................................... 18

You cannot access your range extender...................................................................................... 18

You have intermittent connection problems .............................................................................. 20

Specifications ....................................................................................................... 21

RE7310 ................................................................................................................................................... 21

Environmental........................................................................................................................................ 21

Product Overview

Front view

The light on the front of the range extender gives you information about power, updating and

signal strength.

Light color Status/ description

Solid Blue •Power on, ready for device connection

Blinking Blue

(normal state)

•Starting up.

•Upgrading firmware.

Blinking Orange

(normal state)

•Not connected to the router or other error.

Blinking Blue

(WPS pairing)

•WPS pairing in process

Blinking Orange

(WPS pairing)

•Overlapping WPS pairing sessions

Solid Orange for

2 minutes

(WPS pairing)

•WPS pairing unsuccessful

Side view

WPS™ Button—Use Wi-Fi Protected Setup to automatically and securely add compatible wireless

devices to your network with Push Button Connect. Refer to Using WPS on page 5.

Reset Button—Press and hold until the power light on the front of the range extender blinks to

reset to factory defaults. You can also restore the defaults from the Administration > Factory

Defaults screen in the extender’s settings interface (page 13).

How to Install the Range Extender

There are two ways to use your Linksys range extender: as a wireless range extender or as a

wired range extender (access point). Wireless range extenders repeat existing Wi-Fi signals.

Wired range extenders (access points) create new Wi-Fi hotspots when connected to a router or

access point with an ethernet cable. Both scenarios require a router with a working internet

connection.

Before starting setup, decide whether you want to use your RE7310 as a wireless range extender

or as a wired range extender (access point). Instructions for both setups are in this user guide.

Setting up as a wireless range extender

Wi-Fi Protected Setup (WPS)

Does your router have a WPS button?

WPS is a simple way to connect Wi-Fi devices with Push Button Connect. Routers that support

WPS have a button that might look like one of these symbols:

If your router has a WPS button, continue with WPS below.

If not, or if you are not sure, continue with browser-based setup on page 9.

Note—The WPS button will not work if you have disabled WPS on your router, or if you have

chosen WEP as your network security type. In either case, continue with browser-based setup on

page 9.

1. Plug the range extender into an electrical outlet close to your router. You can move the

range extender to an ideal location later in step 5. After the range extender is plugged in,

the light on the front will blink blue for up to a minute.

2. Wait for the light on the front of your range extender to blink orange before going to

step 3. This can take up to a minute.

3. Extend your network.

a. Press the WPS button on your router. Within the next two minutes complete step

3b.

b. Press the WPS button on the side of your range extender.

The light on the front of your range extender will blink blue. Watch the light to

verify whether the connection was successful.

If it turns solid blue , the connection was successful. Move to step 4.

If it blinks orange , the connection failed. You can try again by

repeating step 3 or try browser-based setup on page 9.

4. Extend a second network.

You may skip this step if you have a single-band router or if you don't want to extend a

second network.

a. Press the WPS button on your router again. Within the next two minutes complete

step 4b.

b. Press the WPS button on your range extender again.

The light on the front of your range extender will start to blink blue. Watch the light

to verify whether the connection was successful.

If it turns solid blue , the connection was successful.

If it blinks orange , the connection failed. You may try again by

repeating step 4.

5. Move your range extender to an ideal spot.

Unplug your range extender and plug it back in midway between your router and the area

without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars

(around 50%) of your router’s Wi-Fi signal at that location. If you don’t have two bars,

move the range extender closer to the router.

6. Check the range extender’s light for connection quality.

It can take up to a minute for the ranger extender to start up after moving it. During this

period, you will see the blinking blue light again.

oSolid blue Ready to use.

oSolid orange Weak connection to the router. Find an outlet closer to

your router.

oBlinking orange Not connected to the router. Find an outlet closer to

your router.

7. Connect your Wi-Fi devices to the extended network you just created.

If you have setup your range extender with a router that features seamless roaming, your

extended Wi-Fi network shares the same network name and password. Connected devices

will select the main or extended network as you move around your house.

If you do not have a router with seamless roaming, select an extended network on your

device's Wi-Fi manager. Extended networks are identified by "_Ext" added to the end of

your main network names. Passwords will be the same as those for your main networks.

Your range extender is now set up. Enjoy your extended Wi-Fi coverage.

Setting up in a web browser

Use this setup method if you don’t have a WPS button on your router, or if you don’t

want to use WPS to set up your RE7310.

1. Plug in the range extender

Plug in the range extender midway between your router and the area without Wi-Fi. Using

your mobile device or laptop, be sure you have at least two bars (around 50%) of your

router’s Wi-Fi signal at that location. If you don’t have two bars, move the range extender

closer to the router. You can move the range extender to an ideal location later using the

setup software.

2. Wait for the light on the front of your range extender to blink orange.

This can take up to a minute

3. Connect to range extender setup network.

On a computer, phone or tablet, connect to the Wi-Fi network: Linksys Extender Setup -

XXX. (XXX are the last three digits of your range extender’s MAC address.)

4. Launch setup.

Visit http://extender.linksys.com (or try http://192.168.1.1) in a browser and follow the

on-screen instructions to complete setup.

Note—If you are not connected to your range extender’s setup network you will get a

page alerting you that you haven’t connected to the extender. The page will ask whether

you are trying to set up a new range extender or access settings on a range extender you

already set up.

Sometimes you will get a "404 Not Found" error page. If that happens, clear your browser

cache and try again.

5. Connect your Wi-Fi devices to the extended network you just created.

If you have setup your range extender with a router that features seamless roaming, your

extended Wi-Fi network shares the same network name and password. Connected devices

will select the main or extended network as you move around your house.

If you do not have a router with seamless roaming, select an extended network on your

device's Wi-Fi manager. Extended networks are identified by "_Ext" added to the end of

your main network names. Passwords will be the same as those for your main networks.

Tabla de contenidos

Otros manuales de Extensor de Linksys

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Instrucciones de funcionamiento originales

Linksys

Linksys RE9000 Manual

Linksys

Linksys RE6350 Manual de usuario

Linksys

Linksys WSB24 Manual de usuario

Linksys

Linksys MAX-STREAM AX1800 Manual de usuario

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Manual de usuario

Linksys

Linksys RE6300 Manual de usuario

Linksys

Linksys RE6800 Manual de usuario

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Manual de usuario

Linksys

Linksys DMA2100 - Media Center Extender Manual de usuario

Linksys

Linksys RE6250 Manual de usuario

Linksys

Linksys DMA2200 - Media Center Extender Manual de usuario

Linksys

Linksys RE6700 Manual de usuario

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Instrucciones de funcionamiento originales

Linksys

Linksys WMCE54AG - Wireless A/G Media Center... Manual de usuario

Linksys

Linksys RE7000 Manual de usuario

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Manual de operación

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Manual de usuario

Linksys

Linksys WRE54G - Wireless-G Range Expander Repeater Instrucciones de funcionamiento originales

Linksys

Linksys RE1000 Manual de usuario

Linksys

Linksys RE3000W Manual de usuario

Linksys

Linksys RE6300 Manual de usuario

Linksys

Linksys RE6700 Manual de usuario

Linksys

Linksys RE9000 Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario