Linak CBD6S 200W Manual de usuario

Page 1 of 24

U S E R M A N U A L

DL2 and CBD6S systems

To learn more about LINAK please visit:

WWW. L I N A K . C O M

Page 2 of 24

Page 3 of 24

Contents

Preface

..............................................................................................................................................................4

Valid for.................................................................................................................................................5

Important information..........................................................................................................................6

Safety instructions...............................................................................................................................6

General......................................................................................................................................................6

Before installation, reinstallation or troubleshooting.......................................................................7

Before start-up...........................................................................................................................................7

During operation.............................................................................................................................7

Misc.................................................................................................................................................7

Only for EU markets..................................................................................................................................8

Only for Non EU markets..........................................................................................................................8

Misuse .......................................................................................................................................................8

Repairs

.............................................................................................................................................................9

Manufacturer’s declaration .................................................................................................................9

Misc. on the DESKLINE

system

.......................................................................................................

Warranty ......................................................................................................................................10

Maintenance ................................................................................................................................10

ETL-markering ...................................................................................................................................11

Description of the DESKLINE

system

.............................................................................................

Mounting guidelines for DL2 ...........................................................................................................13

Bending moment ...............................................................................................................................14

Mounting guidelines CBD6S (SMPS)

................................................................................................

Electrical connection of the DL2 with control box

..........................................................................

Initialisation of the DL2 with control box .......................................................................................17

Disposal of LINAK’s products

............................................................................................................

Labels

.................................................................................................................................................

Drawing appendix .............................................................................................................................20

Declaration of conformity ................................................................................................................23

Addresses

...........................................................................................................................................

Page 4 of 24

Preface

We are delighted that you have chosen a product from LINAK A/S. LINAK systems are high-tech products

based on many years of experience in the manufacture and development of actuators, electric control boxes,

controls, and chargers.

We are also constantly improving our products to meet customer requirements.

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE

products.

We are sure that the DESKLINE

products will give you many years of problem-free operation. Before our

products leave the factory they undergo full function and quality testing. Should you nevertheless experience

problems with your systems, you are always welcome to contact our service departments or service centres.

LINAK subsidiaries and distributors all over the world have authorised service centres, which are always ready

to help you.

LINAK provides a warranty on all its products. This warranty, however, is subject to correct use in accordance

with the specifications, maintenance being done correctly and any repairs being carried out at a service

centre, which is authorised to repair LINAK products.

Changes in installation and use of LINAK systems can affect their operation and durability. Changes must

therefore only be made by agreement with LINAK A/S and are made at your own risk.

LINAK A/S

Page 5 of 24

Valid for:

This User Manual is valid for the following products:

(See the first 3 - 5 characters on the label)

Lifting columns: DL2

Control boxes: CBD6S 200W, CBD6S 300W

Controls: DP1U/DPF1M (if memory function is required)

DP1C/DPT/DPF1C (if memory function and display is required) or

DPA/DPB/DPH/DP1K/DP1V/DPF1K (if only up/down is required.)

Page 6 of 24

Important information

Important information on LINAK® products can be found under the

followingheadings:

Warning!

Failure to comply with these instructions may result in accidents

involving serious personal injury.

Failing to follow these instructions can result in the product being

damaged or being destroyed.

Safetyinstruction

General

Safe use of the system is possible only when the operating instructions

are read completely and the instructions contained are strictly observed.

Failure to comply with instructions marked with the ”NOTE” symbol may

result in serious damage to the system or one of its components.

It is important for everyone who is to connect, install, or use the

systems to have the necessary information and access to this User

Manual. Follow the instructions for mounting –risk of injury if these

instructions are not followed.

The appliance is not intended for use by young children or infirm

persons without supervision.

If there is visible damage on the product it must not be installed.

Note that during construction of applications, in which the actuator

is to be fitted, there must be no possibility of personal injury, for

example the squeezing of fingers or arms.

Assure free space for movement of application in both directions to

avoid blockade.

Page 7 of 24

Before installation, re-installation, or troubleshooting

•

Stop the DL2

•

Switch off the power supply and pull out the mains plug.

•

Relieve the DL2 of any loads, which may be released during the work.

Beforestart-up:

•

Make sure that the system has been installed as instructed in this User

Manual.

•

Make sure that the voltage of the control box is correct before the

system is connected to the mains.

•

System connection. The individual parts must be connected before the

control box is connected to the mains. See the User Manual for LINAK

actuators, if necessary.

During operation:

•

If the control box makes unusual noises or smells, switch off the mains

voltage immediately.

•

Take care that the cables are not damaged.

•

Unplugthemainscableonmobileequipmentbeforeitismoved.

•

The products must only be used in an environment, that corresponds

to their IP protection.

Misc.

The actuator system has a sound level below 55dB(A) in typical

applications.

Updated manuals and declarations can always be found here:

www.linak.com/deskline

Page 8 of 24

Only for EU markets

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have given

supervision or instruction concerning use of the appliance in a safe

way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

Only for Non EU markets

Persons who do not have the necessary experience or knowledge of

the product/products must not use the product/products. Besides,

persons with reduced physical, sensory or mental abilities must not

use the product/products, unless they are under surveillance or they

have been thoroughly instructed in the use of the apparatus by a

person who is responsible for the safety of these persons.

Moreover,childrenmustbeundersurveillancetoensurethatthey

do not play with the product.

It is the operator’s responsibility to ensure that there is free space for

the application to move without risk for the operator or bystanders

before operating the application.

Misuse

Do not overload the actuators –this can cause danger of personal

injury and damage to the system.

Do not use the actuator system for lifting persons. Do not sit or

stand on a table while operating –risk of personal injury.

Do not use the system in environments other than the intended

indoor use

Page 9 of 24

Repairs

In order to avoid the risk of malfunction, all DESKLINE

repairs must only be carried out by authorised LINAK

workshops or repairers, as special tools must be used and special gaskets must be fitted. Lifting units under

warranty must also be returned to authorised LINAK workshops.

Warning!

IfanyoftheDESKLINE® productsareopened,therewillbeariskofsubsequentmalfunction.

Warning!

The DESKLINE

systems do not withstand cutting oil.

DECLARATIONOFINCORPORATION OFPARTLY COMPLETED MACHINERY

LINAK A/S

Smedevænget8

DK - 6430 Nordborg

Herewithdeclares that LINAK DESKLINE

products as characterized bythe following models and types:

Control Boxes CBD4,CBD5,CBD6, CBD6S

And

Linear Actuators LA31, DB4, DB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23

Lifting Columns DL1A, DL2, DL4, DL5, DL6, DL7,DL8, DL9, DL10, DL11, DL12, DL14, DL15,

DL16, DL17, LP2, LP3, BASE1

And

Desk Panels DP, DPA, DPB, DPH, DPF, DPT, DP1C, DP1K, DP1L, DP1V, DP1U, WDPL1

RF Controls HB10, HB20, RFR and RFT

And

Accessories SLS

comply with the following parts of the MachineryDirective 2006/42/EC, ANNEX I, Essential health and

safetyrequirementsrelating to thedesign and construction of machinery:

1.5.1Electricitysupply

The relevant technical documentation is compiled in accordance with part B of Annex VII and that this

documentation or part hereof will be transmitted by post or electronically to a reasoned request by the

nationalauthorities.

This partly completed machinery must not be put into service until the final machinery into

which it is to be incorporated has been declared in conformity with the provisions of the

MachineryDirective2006/42/ECwhereappropriate.

Nordborg, 2014-04-10

LINAK A/S

JohnKling,B.Sc.E.E.

CertificationandRegulatoryAffairs

Authorizedtocompiletherelevant technicaldocumentation

Page 10 of 24

Misc. on the DESKLINE

system

Warranty

Thereisa36months’ warrantyontheDESKLINEproductsagainstmanufacturingfaultsfromtheproduction

dateoftheindividualproducts(seelabel).

LINAK A/S’ warranty is only valid in so far as the equipment has been used and maintained correctly and has

not been tampered with. Furthermore, the system must not be exposed to violent treatment. In the event of

this, the warranty will be ineffective/invalid. For further details, please see LINAK A/S ordinary conditions of

sale.

Maintenance

Clean dust and dirt on the outside of the system at appropriate intervals and inspect them for damage and

breaks.

Inspect the connections, cables, and plugs and check for correct functioning as well as fixing points.

Serviceofdouble-insulatedproducts:

Class II

A Class II or

double insulated

electrical appliance is one which has been designed in such a way that it does

not require a safety connection to electrical earth (US: ground).

The basic requirement is that no single failure can result in dangerous voltage becoming exposed so that it

might cause an electric shock and that this is achieved without relying on an earthed metal casing. This is

usually achieved at least in part by having two layers of insulating material surrounding live parts or by using

reinforced insulation.

There isnoearthing/groundingmeansprovidedontheproduct,andnoearthing/groundingmeansistobe

added to the product.

In Europe, a double insulated appliance must be labelled “Class II”, “double insulated” or bear the double

insulation symbol (a square inside another square).

Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done

only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the

parts they replace.

The cleaners and disinfectants must not be highlyalkaline or acidic (pH value 6-8).

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Columna elevadora de Linak

Linak

Linak MEDLINE CARELINE Service readout Manual de usuario

Linak

Linak DESKLINE DL4S Manual de usuario

Linak

Linak DESKLINE DL5 Manual de usuario

Linak

Linak DL8IC Manual de usuario

Linak

Linak DESKLINE DL1A Manual de usuario

Linak

Linak DESKLINE DL2 Manual de usuario

Linak

Linak DESKLINE DL2 Manual de usuario

Linak

Linak DESKLINE DL1A Manual de usuario

Linak

Linak DESKLINE DL18 Manual de usuario

Linak

Linak Deskline DL20 IC Manual de usuario

Linak

Linak BL1 Manual de usuario

Linak

Linak DL8IC Manual de usuario

Linak

Linak DESKLINE DL18 IC Manual de usuario

Linak

Linak DL8 Manual de usuario

Linak

Linak DL16 Manual de usuario

Linak

Linak TECHLINE ELEVATE - LC3 IC Manual de usuario

Linak

Linak DESKLINE DL20 Manual de usuario

Linak

Linak DL15 Manual de usuario

Linak

Linak DESKLINE DL5 IC Manual de usuario

Manuales populares de Columna elevadora de otras marcas

progressive automations

progressive automations FLT-03-2-2 Manual de usuario

Clemens Technologies

Clemens Technologies S-2R Manual de usuario

Ewellix

Ewellix CPSM Manual de usuario

MAHA

MAHA RGA UC Manual de usuario

Ewellix

Ewellix CPMT Manual de usuario

Dhollandia

Dhollandia DH-VO.20.K9 Manual de usuario

GE FineLINE 35 oligo Manual de usuario

Mohawk

Mohawk LMF-12 Documento técnico

OMA

OMA 511 Manual de usuario

Rotary

Rotary MCH418 Manual de usuario

progressive automations

progressive automations FLT-06 Manual de usuario

IDEAL

IDEAL MSC-18K-X-236 Manual

Ewellix

Ewellix CPMA Series Manual de usuario

Ewellix

Ewellix LIFTKIT-0S-601 Manual de usuario

Maxima

Maxima ML4030B Manual de usuario

rav

rav RAV241-2-L Manual de usuario

Dhollandia

Dhollandia DH-AR Series Manual de usuario

progressive automations

progressive automations FLT-03-2-1 Manual de usuario