Linak TECHLINE LA25 Manual de instrucciones

Actuator LA25

Endstop signals and absolute positioning - Analogue feedback

Connection diagram

LINAK.COM/TECHLINE

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

Connection diagram

2019 © LINAK A/S

Endstop signals and absolute positioning - Analogue feedback

25XXXXXXXX0A0X0X=XXXXX1XXXXXXX

*YELLOW/GREEN: Endstop signals out are NOT potential free

Tip: If you wish to use the endstop signals, you will have to keep power on the red and black wires, otherwise the signal

will be lost.

Standard connector front view

DEUTSCH

BROWN

BLUE

YELLOW*

GREEN*

RED

VIOLET

BLACK

Compliant with:

Danfoss

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

I/O Speciﬁcations

2019 © LINAK A/S

Endstop signals and absolute positioning - Analogue feedback

Input/Output Specification Comments

Description The actuator can be equipped with electronic circuit that gives an

analogue feedback signal, which indicates the position of actuator.

Brown 12-24 VDC (+/-)

12 V ± 20%

24 V ± 10%

Under normal conditions:

12V , 5 A at max load

24 V, 2.5 A at max load

To extend actuator:

Connect Brown to positive

To retract actuator:

Connect Brown to negative

Blue To extend actuator:

Connect Blue to negative

To retract actuator:

Connect Blue to positive

Red Signal power supply (+) 12-24 VDC Current consumption:

Max. 60 mA, also when the

actuator is not running

Black Signal power supply GND (-)

Green Endstop signal out Output voltage min. VIN - 2 V

Source current max. 100 mA

NOT potential free

Yellow Endstop signal in

Violet Analogue feedback

0-10 V (Feedback level 1)

0.5-4.5 V (Feedback level 2)

Tolerances +/- 0.2 V

Max. current output: 1 mA

Ripple max. 200 mV

Transaction delay max. 20 ms

Linear feedback 0.5%

Source current max. 1 mA

4-20 mA (Feedback level 3)

Special (Feedback level 9)

Tolerances +/- 0.2 mA

Transaction delay 20 ms

Linear feedback 0.5%

Output: Source

Serial resistance:

12V max 300 ohm

24V max. 900 ohm

White Not to be connected

For actuators with analogue feedback it is recommended to fully extract and retract the actuator on a regular basis (thereby activat-

ing the limit switches) in order to ensure precise positioning.

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

The user is responsible for determining the suitability of LINAK products for speciﬁc application. LINAK takes great care in providing

accurate and up-to-date information on its products.

However, due to continuous development in order to improve its products, LINAK products are subject to frequent modiﬁcations and

changes without prior notice.Therefore, LINAK cannot guarantee the correct and actual status of said information on its products.

While LINAK uses its best efforts to fulﬁl orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability

of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed

in its catalogues or other written material drawn up by LINAK.

All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.

Otros manuales de Controladores de Linak

Linak

Linak 273 Series Manual de usuario

Linak

Linak Techline Linear Actuator Technology Manual de usuario

Linak

Linak LA36 Long Life Manual de usuario

Linak

Linak ACTUATOR LA36 Manual de instrucciones

Linak

Linak TWINDRIVE TD1 Manual operacional

Linak

Linak TECHLINE LA25 Manual de usuario

Linak

Linak Homeline LA10 Manual de usuario

Linak

Linak LA20 Manual de usuario

Linak

Linak TECHLINE LA25 Manual de instrucciones

Linak

Linak TR-EM-288 Manual de usuario

Linak

Linak LA20 Manual de usuario

Linak

Linak DL12 Manual de usuario

Linak

Linak LA12 Manual de usuario

Linak

Linak TECHLINE IO-Link LA25 Manual de usuario

Linak

Linak TECHLINE LA35 Manual de usuario

Linak

Linak ACTUATOR LA36 Manual de usuario

Linak

Linak TECHLINE LA33 Manual de usuario

Linak

Linak HB100 Manual de usuario

Linak

Linak TECHLINE LA35 Manual de usuario

Linak

Linak TECHLINE LA36 Manual de instrucciones

Linak

Linak Homeline TWINDRIVE TD5 Standard Manual de usuario

Linak

Linak Deskline DL7 system Manual de usuario

Linak

Linak Homeline KA20IC Manual de usuario

Linak

Linak TECHLINE LA25 Manual de instrucciones

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario