Linak TECHLINE LA36 Manual de instrucciones

Actuator LA36/LA37

Endstop signals and relative positioning - Dual hall

Connection diagram

LINAK.COM/TECHLINE

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

Connection diagram

2020 © LINAK A/S

Endstop signals and relative positioning - Dual hall

Diagram of Dual hall:

36XXXXXXXH00XX-XXXXXXXXXXXXXXXX

36XXXX+2HXXXXXX

37XXXX+2HXXXXXX

*VIOLET/WHITE: Endstop signals out are NOT potential free

Tip: If you wish to use the endstop signals, you will have to keep power on the brown, blue,

red and black wires, otherwise the signal will be lost.

Compliant with:

BROWN

BLUE

VIOLET*

WHITE*

RED

YELLOW

BLACK

GREEN

AMP DEUTSCH

6P6P

1-3

4-6

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

I/O Speciﬁcations

2020 © LINAK A/S

Endstop signals and relative positioning - Dual hall

Input/Output Specification Comments

Description The actuator can be equipped with Dual Hall that gives a relative positioning feedback

signal when the actuator moves.

Brown 12, 24, 36* or 48* VDC (+/-)

*Only available on LA36

12 V ± 20 %

24 V ± 10 %

36 V ± 10 %

48 V ± 10 %

Under normal conditions:

12 V, max. 26 A depending on load

24 V, max. 13 A depending on load

36 V, max. 10 A depending on load

48 V, max. 8.0 A depending on load

To extend actuator:

Connect Brown to positive

To retract actuator:

Connect Brown to negative

Blue To extend actuator:

Connect Blue to negative

To retract actuator:

Connect Blue to positive

Red Signal power supply (+) 12 - 36 VDC Current consumption:

Max. 40 mA, also when the

actuator is not running

Black Signal power supply GND (-)

Green Hall B Hall output (PNP)

Movement per each Hall pulse

The Hall sensor signals are generated by the

turning of the actuator gearing.

These signals can be fed into a PLC (Programmable

Logic Controller). In the PLC the quadrature signals

can be used to register the direction and

position of the piston rod.

Output voltage min. VIN - 2 V

Current output 12 mA

Overvoltage on the motor can result in shorter

pulses.

N.B. For more precise measurements, please

contact LINAK A/S.

Actuator G:ear Pitch: mm/count

Yellow Hall A LA36 H8 mm 0,442

LA36 H12 mm 0,662

LA36 H16 mm 0,883

LA36 G16 mm 1,016

LA36 F16 mm 2,309

LA36 F20 mm 2,890

LA37 C2,5 mm 0,138

LA37 C8 mm 0,442

Violet Endstop signal in Output voltage min. VIN - 2 V

Source current max. 30 mA

NOT potential free

White Endstop signal out

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS

The user is responsible for determining the suitability of LINAK products for speciﬁc application. LINAK takes great care in providing

accurate and up-to-date information on its products.

However, due to continuous development in order to improve its products, LINAK products are subject to frequent modiﬁcations and

changes without prior notice.Therefore, LINAK cannot guarantee the correct and actual status of said information on its products.

While LINAK uses its best efforts to fulﬁl orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability

of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed

in its catalogues or other written material drawn up by LINAK.

All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.

Otros manuales para TECHLINE LA36

Este manual sirve para los siguientes modelos

Otros manuales de Controladores de Linak

Linak

Linak ACTUATOR LA36 Manual de instrucciones

Linak

Linak Techline Linear Actuator Technology Manual de usuario

Linak

Linak TECHLINE LA25 Manual de instrucciones

Linak

Linak 239 Series Manual de usuario

Linak

Linak Homeline LA10 Manual de usuario

Linak

Linak TWINDRIVE TD1 280 Manual de usuario

Linak

Linak DL12 Manual de usuario

Linak

Linak TECHLINE LA37 Manual de usuario

Linak

Linak TECHLINE LA36 Manual de instrucciones

Linak

Linak HOMELINE LA18 IC Standard Series Manual de usuario

Linak

Linak BusLink LA14 Manual de usuario

Linak

Linak LA20 Manual de usuario

Linak

Linak TR-EM-273 Manual de usuario

Linak

Linak 273 Series Manual de usuario

Linak

Linak LA12 Manual de instrucciones

Linak

Linak TWINDRIVE HB12 Manual de usuario

Linak

Linak HB100 Manual de usuario

Linak

Linak Homeline LA10 Manual de usuario

Linak

Linak TR-EM-288-SPF Manual de usuario

Linak

Linak Homeline TWINDRIVE TD5 Standard Manual de usuario

Linak

Linak Homeline KA20IC Manual de usuario

Linak

Linak DL12 Manual de usuario

Linak

Linak TECHLINE LA37 Manual de usuario

Linak

Linak LA36 Long Life Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario