LG LCZ3750-DN Manual de usuario

OWNER'S MANUAL

Color Video Camera

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

LCZ3750-DN / LCZ3750-DP

LCZ3750 series

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

dangerous voltage within the product’s

enclosure that may be of sucient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

FCC WARNING: This equipment may generate or use radio

frequency energy. Changes or modications to this

equipment may cause harmful interference unless the

modications are expressly approved in the instruction

manual. The user could lose the authority to operate this

equipment if an unauthorized change or modication is

made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment

is operated in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to

radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

• A suitable conduit entries, knock-outs or glands shall

be provided in the cable entries of this product in the

end user.

• Caution: Danger of explosion if battery is incorrectly

replaced. Replaced only with the same or equivalent

type recommended by the manufacturer. Dispose

of used batteries according to the manufacturer’s

instructions.

• Holes in metal, through which insulated wires pass,

shall have smooth well rounded surfaces or shall be

provided with brushings.

This Class A digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe A est conforme à la

norme NMB-003 du Canada.

Warning

• Do not install this equipment in a conned space such

as a bookcase or similar unit.

• Wiring methods shall be in accordance with the

National Electric Code, ANSI/NFPA 70.

• This is a class A product. In a domestic environment

this product may cause radio interference in which

case the user may be required to take adequate

measures.

• To reduce a risk of re or electric shock, do not expose

this product to rain or moisture.

Caution

• This installation should be made by a qualied service

person and should conform to all local codes.

• To avoid electrical shock, do not open the cabinet.

Refer servicing to qualied personnel only.

• The apparatus shall not be exposed to water (dripping

or splashing) and no objects lled with liquids, such as

vases, shall be placed on the apparatus.

To disconnect power from mains, pull out the mains cord

plug. When installing the product, ensure that the plug is

easily accessible.

Disposal of your old appliance

1. When this crossed-out wheeled bin

symbol is attached to a product it means

the product is covered by the European

Directive 2002/96/EC.

All electrical and electronic products

should be disposed of separately from the

municipal waste stream via designated

collection facilities appointed by the

government or the local authorities.

3. The correct disposal of your old

appliance will help prevent potential

negative consequences for the

environment and human health.

4. For more detailed information about

disposal of your old appliance, please

contact your city oce, waste disposal

service or the shop where you purchased

the product.

LG Electronics hereby declares that this/

these product(s) is/are in compliance with

the essential requirements and other relevant

provisions of Directive 2004/108/EC, 2006/95/

EC, and 2009/125/EC.

European Standards Centre:

Krijgsman 1, 1186 DM Amstelveen The

Netherlands

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not t into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specied by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specied by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Important Safety Instructions

Power Supply

This camera must always be operated a DC 12 V Certied/

Listed, class 2 power supply only.

Handling of the unit

Be careful not to spill water or other liquids on the unit. Be

cautions not to get combustible or metallic material inside

the body. If used with foreign matter inside, the camera is

liable to fail or to get cause of re or electric shock.

• Remove dust or dirt on the surface of the lens with a

blower.

• Use a dry soft cloth to clean the body. If it is very dirty,

use a cloth dampened with a small quantity of neutral

detergent then wipe dry.

• Avoid the use of volatile solvents such as thinners,

alcohol, benzene and insecticides.

• They may damage the surface nish and/or impair the

operation of the camera.

Operating and storage location

Avoid viewing a very bright object (such as light ttings)

during an extended period. Avoid operating or storing the

unit in the following locations.

• Extremely hot or cold places (operating temperature

-10 °C to 50 °C, however, we recommend that the unit

be used within a temperature range of 0 °C to 45 °C)

• Damp or dust place

• Places exposed to rain

• Places subject to strong vibration

• Close to generators of powerful electromagnetic

radiation such as radio or TV transmitters.

Cautions for Safe Operation

Features................................................................. 8

Part Names and Functions................................... 9

Connections ........................................................12

Power connection.........................................................12

Connecting Monitor ....................................................12

Connecting RS-485 Controller .................................13

Alarm Connection ........................................................13

Day&Night function settings....................................14

OSD function settings.................................................14

FOCUS and ZOOM Function Settings....................15

Menu Operation..................................................17

General Operation........................................................19

Focus settings ................................................................20

Exposure Settings.........................................................22

White Balance setting .................................................24

Day/Night setting .........................................................26

Motion Detection setting ..........................................27

Privacy Mask setting ....................................................28

3D-DNR setting..............................................................29

Special menu settings.................................................30

Reset settings.................................................................32

Reference ............................................................33

On Screen Display.........................................................33

RS-485 Protocol (Optional)........................................36

Specications .................................................................38

Contents

Features

This color video camera is designed for use in monitoring

system.

• High resolution and high sensitivity with a 4.5 mm

(1/4 Type) Super HAD CCD II.

• High magnitude of zoom lens with optical x37,

Digital x12 (Maximum x444)

• Auto Focus

• Auto White Balance

• Auto exposure with DC Iris control

• Day & Night function

Part Names and Functions

aLens mount cap

The cap is installed to protect the lens mount section.

Remove the lens mount cap before install the camera.

(sold separately)

bCamera installation bracket

The bracket can be xed at the top or bottom of the

camera.

Part Names and Functions

c d e

cPower indicator

Comes on when the power to the camera is on.

dControl buttons

• T(TELE) button

When push, picture is telephoto.

• N(NEAR) button

In a manual situation, focus get near.

• M(MENU) button.

If you want to set up a diverse function, you can

push this button.

• W(WIDE) button

When push, picture is wide angle.

• F(FAR) button

In a manual situation, focus get far.

• H(HOT) button

When you set the DAY/NIGHT mode to EXT,

you can change the Day/Night mode using this

button.

eVideo output connector (BNC type)

Connect this connector to a device such as a VCR or

monitor with a VIDEO IN connector.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Videocámara de otras marcas

Toshiba

Toshiba CAMILEO Z100 Manual de usuario

Panasonic

Panasonic NV-VS40B Manual de usuario

Canon

Canon RC 260 Manual de usuario

Sony

Sony Handycam DCR-DVD7E Manual de usuario

Brinno

Brinno TimeLapse TLC200 Manual de usuario

JVC

JVC GR-SXM68AC Guía de inicio rápido

Panasonic

Panasonic AG-HMC152EN Manual de usuario

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario

MYDLINK

MYDLINK DCS-6100LH Manual de usuario

Sony

Sony video Hi8 Handycam CCD-TR555 Manual de usuario

SECURECOM

SECURECOM V-5014B Manual de usuario

Panasonic

Panasonic HDC-SD100 Manual de usuario

Sharper Image

Sharper Image U-VIDEO Manual de usuario

JVC

JVC AA-V15EG Manual de usuario

Canon

Canon LEGRIA HV40 Manual de usuario

Sony

Sony Handycam DCR-VX2000 Manual de usuario

RCA

RCA CC616 Manual de usuario

Panasonic

Panasonic NVM40 Manual de usuario