LevelOne KVM-8916 Manual de usuario

LevelOne

KVM-0808/KVM-8916

19” Widescreen LCD Rack Console with

8/16-Port KVM Switch

Quick Installation Guide

Console Combo KVM Switch

Package Checklist

KVM Switch Unit

Quick Installation Guide

Computers/Servers Installation

Each Host port connector is KVM-Cabel type. The 3-in-1 VGA cable has a KVM-Cabel male connector at one end,

plug it into PC port of KVM switch back panel, and plug the other end’s connectors to PC VGA port, and if

■PS/2 Computers --- Connect PS/2 keyboard connector to keyboard port, and PS/2 mouse connector to mouse

port.

■USB Computers --- connect PS/2-USB changer to PS/2 keyboard connector, then plug the changer into

available USB port. This single USB port can communicate both keyboard and mouse signals. It works as a

standard HID (Human Interface Device), no extra driver needed.

■Note: the PS/2 mouse connector should be left disconnected.

Console Installation

Local Console --- Connect the keyboard, mouse and monitor to the local console ports.

Remote Console --- With a CAT5 cable, one end connecting to the RJ45 connector on the CAT5 extender module,

and the other end connecting to CAT5 Receiver.

The recommended Power Up sequence is as follows: monitor, KVM Switch, finally the computers.

Hotkeys & OSD

The table blow lists all supported hotkey commands.

Command

Function

Space bar

Bring up the OSD overlay screen

↑or↓

Moving Up or Down

[1,2,..,8] bank,

[01, 02,..,32] port

■The first digit is bank number starting with “1”. The first

KVM switch unit on the Daisy chain line is of bank 1 (the

Master). A standalone KVM switch is fixed in bank 1.

■The second & third digits are port number starting with “01”

PgUp

Previous bank

PgDn

Next bank

To enable/disable beep sound function

To enable/disable the Screen Saving function and 10min

auto-logout function. This function is default OFF (Disable).

To enable Firmware upgrade function

To log out the OSD. If Security is enabled it will show up the

is disabled it will show up the Status window

For SUPERVISOR to set the OSD back to factory default

value (except User Security settings).

For SUPERVISOR to activate the Auto-Scan function

For SUPERVISOR to enable/disable Security function. If the

Security is off, we don’t need user name & password to access

to the KVM system. This function is default OFF (Disable).

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”.

Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch,

and does not affect your computers or software function in any way.

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”.

Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch,

and does not affect your computers or software function in any way.

Example #2 –To switch to Bank 1 Port1, press “Caps Lock”, “Caps Lock”, and “1”, “0”, “1”.

please enter next key in

2 seconds in the

Hotkey sequence

please enter next key in

2 seconds in the

Hotkey sequence

Caps

Lock

Caps

Lock

Space Bar

please enter next key in

2 seconds in the

Hotkey sequence

Caps

Lock

Caps

Lock

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de LevelOne

LevelOne

LevelOne KVM-0811 Manual de usuario

LevelOne

LevelOne GEL-2060 Guía rápida

LevelOne

LevelOne GSW-1676 Manual de usuario

LevelOne

LevelOne GES-0852 Manual de usuario

LevelOne

LevelOne GEP-5070 Manual de usuario

LevelOne

LevelOne GSW-0509 Manual de usuario

LevelOne

LevelOne GEP-0523 Manual de usuario

LevelOne

LevelOne FSW-1611TX Manual de usuario

LevelOne

LevelOne ProCon GSW-1291 Manual de usuario

LevelOne

LevelOne ProCon GSW-2690 Manual de usuario

LevelOne

LevelOne FSW-0512 Manual de usuario

LevelOne

LevelOne Infinity IES-1085 Manual de usuario

LevelOne

LevelOne OfficeCon GSW-2440 Manual de usuario

LevelOne

LevelOne IES-0610 V2 Manual de usuario

LevelOne

LevelOne GSW-5270 Manual de usuario

LevelOne

LevelOne GSW-0504 Manual de usuario

LevelOne

LevelOne OfficeCon FSW-2420TX Manual de usuario

LevelOne

LevelOne Infinity IFS-0501 Manual de usuario

LevelOne

LevelOne FEP-0811 Manual de usuario

LevelOne

LevelOne 20 GE PoE-Plus Manual de usuario

LevelOne

LevelOne GEP-0950 Manual de usuario

LevelOne

LevelOne KVM-0221 Manual de usuario

LevelOne

LevelOne FSW-0513 Manual de usuario

LevelOne

LevelOne KVM-0211 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario