LevelOne FCS-1152 Instrucciones de uso
Fixed Network Camera
Hardware User Manual
FCS-1152, FCS-1153
Ver. 2014/06/04
Hardware Manual
2
Table of Contents
Precautions.......................................................................4
Safety Instructions...................................................................................................6
Introduction .....................................................................7
The List of Models ...................................................................................................7
Package Contents.....................................................................................................7
Physical Description ................................................................................................8
Before Installation .........................................................10
How to Connect DI/DO and Audio Devices (Optional)......................................10
How to Connect DI/DO Devices............................................................ 10
How to Connect Audio Devices............................................................. 14
Indoor Installation Procedures.....................................15
Step 1:Attach the Camera Lens...........................................................................15
Step 2:Attach the Mounting Block......................................................................17
Step 3: Mount the Indoor Bracket .......................................................................18
Step 4:Attach the Camera to the Bracket...........................................................18
Step 5: Connect the Cable(s).................................................................................21
Step 6:Access the Camera Live View ..................................................................22
Step 7:Adjust the Viewing Angle and Focus.......................................................22
Other Adjustments and Accessories.............................23
How toAdjust the Viewing Angle and Focus ......................................................23
Hardware Manual
3
FCS-1152...............................................................錯誤! 尚未定義書籤。
How to Install / Remove the Memory Card.........................................................25
How to Insert the Memory Card ............................................................ 25
How to Remove the Memory Card........................................................ 25
How to Replace the Lens.......................................................................................26
Accessing the Camera....................................................28
Configure the IPAddresses...................................................................................28
Access the Camera.................................................................................................32
Hardware Manual
4
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to follow
the safety instruction given may directly endanger people, cause damage to the system or to
other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your local
office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
Hardware Manual
5
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
Hardware Manual
6
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may cause
hazards.
Do not use accessories not recommended by the manufacturer
Only install this device in a dry place protected from weather
Servicing
Do not attempt to service this video product yourself. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the inner parts of video product have been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating Instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as an improper
adjustment of other controls may result in damage, and will often require extensive work by a
qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine if the video product is in proper operating condition.
Hardware Manual
7
Introduction
The List of Models
This hardware manual contains the following models:
FCS-1152
Fixed Network Camera, 5-Megapixel, PoE 802.3af, Day & Night,
WDR
FCS-1153
Fixed Network Camera, 5-Megapixel, PoE 802.3af, Day & Night
From the installation perspective, these models are very similar; therefore one manual is used for
all of them.
Package Contents
Camera
Lens (FCS-1153)
Lens (FCS-1152)
Fixed focal lens with
manual focus and fixed iris
Vari-focal lens with manual
focus and DC iris
Mounting Block
with Screws
Terminal Block
(for Audio and DI/DO)
Quick Installation Guide
Hardware Manual
8
Physical Description
FCS-1152
FCS-1153
1) Ethernet Port
Connects to a network using an Ethernet cable.
2) Memory Card Slot
Insert a memory card into this slot for local recording purposes. See How to Install /
Remove the Memory Card on page 25 for more information.
NOTE: Supports microSDHC and microSDXC cards.
3) Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including
administrator’s password.
The reset button can be used for following purposes:
1. The administrator’s password has been forgotten and therefore the camera cannot be
accessed.
2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
3. In case of connectivity issues or abnormal video quality.
Hardware Manual
9
How to do the reset?
Using a pointed object, such as a paper clip, press and hold the reset button for at least 5
seconds or until the Power LED goes off.
4) Power LED
The Power LED turns on when the camera is powered on and the system is running.
5) Digital Input / Output (DI/DO) and Audio Input / Output
This connector connects to digital input or output devices, such as an alarm trigger, panic
button, etc., as well as audio input and output devices, such as microphones and speakers.
Digital Input (DI) and Digital Output (DO) devices are used in applications like motion
detection, event triggering, alarm notifications, etc. See How to Connect DI/DO and Audio
Devices (Optional) on page 10 for more information.
6) DC Iris Port
When a DC iris lens is used, connect the lens cable to this port.
Hardware Manual
10
Before Installation
This section describes the procedures in preparing the Digital Input and Output (DI/DO) and
Audio Input and Output devices that you can connect to the camera using the bundled terminal
blocks. The use of these devices, however, is optional.
How to Connect DI/DO and Audio Devices (Optional)
Depending on your surveillance needs, you may connect digital input / output or audio input /
output devices to your camera. The camera comes with one (1) terminal block for both digital and
audio input/output devices.
How to Connect DI/DO Devices
Digital Input (DI) devices can be used to notify the camera about an activity in the camera site. DI
can be triggers of events. For example, you can connect a “panic button” to the camera; as such
when the panic button is pressed, the alarm signal will be sent through the camera. Other
common DI device applications are emergency button, smoke detector, passive infrared sensor,
etc.
Digital Output (DO) devices are external devices that are activated by the camera upon an event
inside the camera. For example, you can connect an “alarm horn” to the camera; as such when
an event occurs inside the camera (e.g. detected intruder), the alarm horn will sound. Other
common DO device applications are motion-triggered lights, electric fence, magnetic door locks,
etc.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de LevelOne
LevelOne
LevelOne FCS-3072 Instrucciones de uso
LevelOne
LevelOne CamCon WCS-2030 Guía del usuario
LevelOne
LevelOne FCS-1050 Manual de usuario
LevelOne
LevelOne CamCon FCS-4000 Manual de usuario
LevelOne
LevelOne CamCon WCS-2070 Manual de usuario
LevelOne
LevelOne FCS-5042 Manual de usuario
LevelOne
LevelOne CamCon WCS-2030 Manual de usuario
LevelOne
LevelOne FCS-0010 Manual de usuario
LevelOne
LevelOne WCS-2060 Manual de usuario
LevelOne
LevelOne FCS-3051 Manual de usuario
LevelOne
LevelOne WCS-2010 Manual de usuario
LevelOne
LevelOne FCS-3021 Manual de usuario
LevelOne
LevelOne FCS-4042 Instrucciones de uso
LevelOne
LevelOne FCS-5061 Manual de usuario
LevelOne
LevelOne FCS-3102 Manual de usuario
LevelOne
LevelOne FCS-5052 Manual de usuario
LevelOne
LevelOne FCS-5057 Instrucciones de uso
LevelOne
LevelOne FCS-3071 Manual de usuario
LevelOne
LevelOne FCS-0031 Manual de usuario
LevelOne
LevelOne FCS-3071 Manual de usuario
